Windows 10: Random Numerous BSOD majority are 133 errors

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 5,171
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #11

    Open administrative command prompt and type or copy and paste:
    1) sfc /scannow
    2) dism /online /cleanup-image /restorehealth
    3) chkdsk /scan
    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    4) msconfig (in the pop up system configuration > move the dot from normal startup to selective startup > uncheck load startup items > click service tab > in left lower corner check hide all Microsoft services > in the lower right side click disable all > click apply or ok > do not reboot)

    5) taskmgr (in the pop up task manager > click on the start up tab > click on status so that the column sorts with enable rising to the top > right click on each row with enable and change to disable)

    https://support.microsoft.com/en-us/...oot-in-windows

    How to perform a Clean Boot in Windows 10 - TechNet Articles - United States (English) - TechNet Wiki

    6) shutdown /r (you will reboot the computer so that it is in clean boot)

    7) Attempt the DM log collector when in clean boot and post the zip into the thread:
    BSOD - Posting Instructions - Windows 10 Forums
      My ComputerSystem Spec

  2.   My ComputerSystem Spec


  3. Posts : 20
    wundows 10 pro
    Thread Starter
       1 Week Ago #13

    I finally have a log file that is not empty, can someone take a look at it.

    Thanks
      My ComputerSystem Spec


  4. Posts : 2,714
    64bit Win 10 Pro ver 1703 Build 15063.608
       1 Week Ago #14

    There are a range of different BSOD errors as you pointed out, these tend to suggest that you may have a hardware issue.

    Some of the possible causes identified by WinDbg are shown below:

    Code:
    BugCheck 7F, {8, ffff8400885c8bf0, ffff840088c38000, fffff802d7f78d6d}
    
    *** WARNING: Unable to verify checksum for win32k.sys
    Probably caused by : memory_corruption
    
    BugCheck 3B, {c0000005, fffff80250f47fd9, ffffaa001f7eb6e0, 0}
    
    Probably caused by : hardware ( nt!PfpPfnPrioRequest+2c9 )
    
    BugCheck 7F, {8, ffffd40095e4fbf0, ffffd4009b8c7ec0, fffff80227a3496c}
    
    Probably caused by : memory_corruption
    Please test your RAM: Note: this will probably take more than a day to complete the testing.



    Random Numerous BSOD majority are 133 errors Diagnostic Test Random Numerous BSOD majority are 133 errors
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
    Last edited by philc43; 1 Week Ago at 11:07. Reason: added additional info
      My ComputersSystem Spec


  5. Posts : 5,171
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #15

    When available please post the results of the steps in post #11.
    When you were able to generate the DM log was it after all of the steps?
    Had you tried it after steps 1 -3 and before clean boot or only after clean boot?
      My ComputerSystem Spec


  6. Posts : 20
    wundows 10 pro
    Thread Starter
       1 Week Ago #16

    I never could get the DM log to create a suitable file. I copied the TPfile into the DM log folder.

    I am going to start the mem test right now.

    Thanks for your patience.

    leo
      My ComputerSystem Spec


  7. Posts : 5,171
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #17

    LeoH said: View Post
    I never could get the DM log to create a suitable file. I copied the TPfile into the DM log folder.
    We would like to have the DM log collector work smoother.
    Please describe where the DM log collector got stuck or appeared to malfunction.
    Was it not apparent until you viewed the end result or were you able to see a problem before the attempted viewing?
    Please describe the steps in as much detail as possible what you did to be able to post a working log.
      My ComputerSystem Spec


  8. Posts : 20
    wundows 10 pro
    Thread Starter
       1 Week Ago #18

    I followed the instructions as best I could and every seemed to work fine, no error messages, hangs or anything. But if you use file explorer to check the properties is says it 22 bytes long and the size on the disk is 0. I seen where someone asked what to do with the TPfile and they said that it was the source of the DMLog folder. So I copied the contents to the DMLog folder. It was then 11 MB long, so I deleted the larger files until I got down to 1,i73 MB. I thought I see where the "Zip" had a maximum size of 2 MB.
      My ComputerSystem Spec


  9. Posts : 5,171
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #19

    Which is the TP file?
    Which files did you delete?
    Is your impression that it was a compression issue?
      My ComputerSystem Spec


  10. Posts : 20
    wundows 10 pro
    Thread Starter
       5 Days Ago #20

    The file that I copied the dmp files is named TFDebugFiles.

    The mem test ran for 19 cycles and 20 hours. No errors.
      My ComputerSystem Spec


 
Page 2 of 4 FirstFirst 1234 LastLast

Related Threads
I'm currently experiencing random BSOD every 25-45 minutes, and it seems to be more frequent when I'm gaming. I've seen about five different BSOD errors now. I have linked my logs, help would be appreciated.147382
Many Different BSOD Errors At Random Intervals in BSOD Crashes and Debugging
Hi, I've been having seemingly random BSOD's over the past couple of months. I recently reset my BIOS and this went away for a week, however, earlier today I received another. Oddly enough, the first time I ran the DM log collector utility this...
Random BSOD errors(ntoskrnl.exe) in BSOD Crashes and Debugging
Hello. Since 2 months i'm getting several BSOD errors. They appear in random moments when i'm playing games, watching videos etc. I have really no idea how i can fix this :( Here is the dump file: ​051816-14187-01.dmp - Google Drive EDIT: added zip...
Random BSOD with different errors in BSOD Crashes and Debugging
Hi all, I've been getting random BSOD errors with no probable cause. It happens when the computer is idle or when I'm browsing the internet or while playing games. There's no time pattern to it neither is there a usage pattern. I've tried some...
Hi, Over the past couple of days I have been having reasonably frequent BSODs. Some have not created a dump file. I cant pinpoint anything in particular but it seems to be pointing to a driver issue but never identifies the driver from what I can...

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:28.
Find Us