Page 1 of 3 123 LastLast
  1.    03 Sep 2017 #1
    Join Date : Sep 2017
    Posts : 11
    Windows 10

    BSOD 0x00000001 triggered by Skyrim SE quicksave/autosave


    Hello everyone I've been trying to resolve this issue for a week or so and have not had much luck. I built a new computer with a Ryzen 1800x to replace my dead one and cloned my drives to brand new M.2 drives. I have a Samsung 960 PRO for boot/applications and a WD blue 1TB for games and the problem started immediately after the rebuild. It only occurred while playing Skyrim, Nier: automata (installed after the rebuild) never triggered the BSOD. Things I did before first BSOD memtest86+ 5 passes, intel burn test 20 hours, Prime95 6 hours.
    Things I've tried to resolve issue in order (APC mismatch during saving after each item unless otherwise stated) download BlueScreenView (didn't/don't understand most of what it says but got me the bugcheck codes :-) ), disabled memory OC 1.35V 2800MHZ, memtest86+ 8 passes single threaded, disabled SMT (re-enabled after crash), memtest86+ 9 passes multi-threaded, furmark 1 hour, Prime95 20 hour, ran SFC.exe /scannow, ran DISM (just in case) and re-ran SFC, format windows drive clean install, enabled driver verifier (on everything none microsoft), clean install of skyrim (16 hours in game then received BSOD "DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000c4" while the video card was trying to catch up to my actions in game), disabled driver verifier, enable driver verifier (on everything)
    Driver verifier on everything was accidental but was interesting,I was AFK during the reboot to re-enable driver verifier so i missed all but the last two of the UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f BSOD's it through. The computer would load to the login screen while windows continued to load in the background the BSOD would appear and start the process all over again. the last 0x0000007f I was able to login but BSOD hit before I could disable driver verifier, learned how to get windows 10 into safe mode (I miss my bloody F* keys all of a sudden) and disable driver verifier, rebooted and here I am.

    any help would be greatly appreciated.
    PJ

    PS.My saves are going to a NAS over a Mellanox 10Gbe fiber
      My ComputerSystem Spec
  2.    03 Sep 2017 #2
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,345
    Windows 10 Pro X64 16299.19

    The last dump, 9/3 5:41Om indicates a problem with ambakdrv.sys.
    Code:
    BugCheck 7F, {8, fffff801e1048e70, ffff9d005a98afb0, fffff801deea6272}
    *** WARNING: Unable to verify timestamp for ambakdrv.sys
    *** ERROR: Module load completed but symbols could not be loaded for ambakdrv.sys
    Probably caused by : memory_corruption
    Followup:     memory_corruption
    Driver Description: Aomei BackUpper driver
    Driver Update Site: http://www.aomeitech.com/download.html

    The Aomei driver is quite old,:
    Code:
    0: kd> lmvm ambakdrv
    Browse full module list
    start             end                 module name
    fffff80b`24310000 fffff80b`2431a000   ambakdrv T (no symbols)           
        Loaded symbol image file: ambakdrv.sys
        Image path: \SystemRoot\system32\ambakdrv.sys
        Image name: ambakdrv.sys
        Browse all global symbols  functions  data
        Timestamp:        Tue Dec 25 03:46:35 2012 (50D967EB)
        CheckSum:         0001A96C
        ImageSize:        0000A000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Check to see if there is a newer version of Aomei Backupper or better yet, uninstall it and switch to Macrium Reflect Free or Premium. See id that helps.
      My ComputersSystem Spec
  3.    03 Sep 2017 #3
    Join Date : Sep 2017
    Posts : 11
    Windows 10
    Thread Starter

    I had the latest version installed, uninstalled it and deleted \SystemRoot\system32\ambakdrv.sys set verifier to scan all again. 7F BSOD returned, betting it's going to be one of these unknowns this time. Could the repeated crashes be damaging the files or did the damaged files come first?Attachment 151810Attachment 151811
      My ComputerSystem Spec
  4.    04 Sep 2017 #4
    Join Date : Apr 2017
    Posts : 8,903
    windows 10 professional version 1607 build 14393.969 64 bit

    Open administrative command prompt and type or copy and paste:

    1) sfc /scannow
    2) dism /online /cleanup-image /restorehealth
    3) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
    4) chkdsk /x /f /r
    This may take many hours so plan to run overnight

    Microsoft Windows [Version 10.0.15063]
    (c) 2017 Microsoft Corporation. All rights reserved.


    C:\Windows\system32>chkdsk /x /f /r
    The type of the file system is NTFS.
    Cannot lock current drive.


    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)



    Type Y
    And then reboot.


    5) Use one drive or drop box to post a share link for the memory dump:

    memory dump: file explorer > this PC local c: drive > search:
    %SystemRoot%\MEMORY.DMP
    or
    C:\Windows\MEMORY.DMP

    6) Post the chkdsk drive scan results in the event.vwr using the information in this link:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials

    7) uninstall bitdefender:
    Uninstall Bitdefender

    8) turn on Microsoft Windows defender


    9) The best way to fix the misbehaving Nvidia driver is to uninstall everything Nvidia using Display driver uninstaller and install new drivers from the computer manufacturer's website or from the Nvidia website.

    The computer manufacturer's web site is preferred.

    Enter the computer's serial or product number and the operating system to view available drivers.


    If you use the Nvidia web site be sure the "clean install" box is checked and only install the graphics driver and the physx driver.


    Official Display Driver Uninstaller DDU Download


    Display Driver Uninstaller Download version 17.0.7.2


    Display Driver Uninstaller: How to use - Windows 7 Help Forums


    NVIDIA






    nvlddmkm.sys nVidia Video drivers http://www.nvidia.com/Download/index.aspx
    Get from OEM for laptops

    Code:
    Event[1261]:  Log Name: System  Source: Microsoft-Windows-Kernel-General  Date: 2017-08-31T20:46:40.124  Event ID: 5  Task: N/A  Level: Error  Opcode: Info  Keyword: N/A  User: S-1-5-18  User Name: NT AUTHORITY\SYSTEM  Computer: BLUEONI  Description: {Registry Hive Recovered} Registry hive (file): '\??\Volume{827707f4-5194-41b1-be62-4232245f7497}\System Volume Information\SPP\SppCbsHiveStore\{cd42efe1-f6f1-427c-b004-033192c625a4}{401637D3-D4FB-4D1F-914E-2F142E1B6CFC}' was corrupted and it has been recovered. Some data might have been lost.
    Code:
    8/29/2017 12:12 AM    Application Error    Faulting application name: vsserv.exe, version: 22.0.8.118, time stamp: 0x5956141a
    Faulting module name: ntdll.dll, version: 10.0.15063.447, time stamp: 0xa329d3a8
    Exception code: 0xc000000d
    Fault offset: 0x0000000000105a50
    Faulting process id: 0x7b0
    Faulting application start time: 0x01d32058acd0ee26
    Faulting application path: C:\Program Files\Bitdefender\Bitdefender Security\vsserv.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
    Report Id: e4af85c1-03d8-4540-8b07-4c610eaeebbf
    Faulting package full name: 
    Faulting package-relative application ID:8/28/2017 11:51 PM    Application Error    Faulting application name: vsserv.exe, version: 22.0.8.118, time stamp: 0x5956141a
    Faulting module name: ntdll.dll, version: 10.0.15063.447, time stamp: 0xa329d3a8
    Exception code: 0xc000000d
    Fault offset: 0x0000000000105a50
    Faulting process id: 0x10c4
    Faulting application start time: 0x01d3205640d42ddf
    Faulting application path: C:\Program Files\Bitdefender\Bitdefender Security\vsserv.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
    Report Id: b23ecd51-c7a8-4371-844e-fbe299d1444b
    Faulting package full name: 
    Faulting package-relative application ID:
    Code:
    Name	NVIDIA GeForce GTX 560 TiPNP Device ID	PCI\VEN_10DE&DEV_1200&SUBSYS_838B1043&REV_A1\4&1C3D25BB&0&0019
    Adapter Type	GeForce GTX 560 Ti, NVIDIA compatible
    Adapter Description	NVIDIA GeForce GTX 560 Ti
    Adapter RAM	1.00 GB (1,073,741,824 bytes)
    Installed Drivers	C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumd.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumd.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumd.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvldumd.dll
    Driver Version	22.21.13.8541
    INF File	oem23.inf (Section004 section)
    Color Planes	Not Available
    Color Table Entries	4294967296
    Resolution	1680 x 1050 x 59 hertz
    Bits/Pixel	32
    Memory Address	0xF4000000-0xF5FFFFFF
    Memory Address	0xE0000000-0xF7FFFFFF
    Memory Address	0xE8000000-0xEBFFFFFF
    I/O Port	0x0000F000-0x0000F07F
    IRQ Channel	IRQ 54
    I/O Port	0x000003B0-0x000003DF
    I/O Port	0x000003C0-0x000003DF
    Memory Address	0xA0000-0xBFFFF
    Driver	c:\windows\system32\driverstore\filerepository\nvaki.inf_amd64_b2662aa358e9b7e8\nvlddmkm.sys (22.21.13.8541, 14.88 MB (15,600,248 bytes), 8/28/2017 8:15 PM)
    Last edited by zbook; 04 Sep 2017 at 00:41.
      My ComputerSystem Spec
  5.    04 Sep 2017 #5
    Join Date : Sep 2017
    Posts : 11
    Windows 10
    Thread Starter

    i'll edit this post as i go, the memory dump is 3.4 gigs so that will take a little while. would you like me to test after each step to see if the issue has been resolved? it probably would be faster to format and reinstall again than repair current install lol

    Code:
    Microsoft Windows [Version 10.0.15063](c) 2017 Microsoft Corporation. All rights reserved.C:\WINDOWS\system32>sfc /scannowBeginning system scan.  This process will take some time.Beginning verification phase of system scan.Verification 100% complete.Windows Resource Protection did not find any integrity violations.C:\WINDOWS\system32>dism /online /cleanup-image /restorehealthDeployment Image Servicing and Management toolVersion: 10.0.15063.0Image Version: 10.0.15063.0[==========================100.0%==========================] The restore operation completed successfully.The operation completed successfully.C:\WINDOWS\system32>chkdsk /x /f /rThe type of the file system is NTFS.Cannot lock current drive.Chkdsk cannot run because the volume is in use by anotherprocess.  Would you like to schedule this volume to bechecked the next time the system restarts? (Y/N) yThis volume will be checked the next time the system restarts.C:\WINDOWS\system32>
    checkdisk results
    Code:
    Checking file system on C:The type of the file system is NTFS.
    
    
    A disk check has been scheduled.
    Windows will now check the disk.                         
    
    
    Stage 1: Examining basic file system structure ...
      307712 file records processed.                                                         File verification completed.
      7875 large file records processed.                                      0 bad file records processed.                                      
    Stage 2: Examining file name linkage ...
      415296 index entries processed.                                                        Index verification completed.
      0 unindexed files scanned.                                           0 unindexed files recovered to lost and found.                     
    Stage 3: Examining security descriptors ...
    Cleaning up 1139 unused index entries from index $SII of file 0x9.
    Cleaning up 1139 unused index entries from index $SDH of file 0x9.
    Cleaning up 1139 unused security descriptors.
    Security descriptor verification completed.
      53793 data files processed.                                            CHKDSK is verifying Usn Journal...
      37254160 USN bytes processed.                                                            Usn Journal verification completed.
    
    
    Stage 4: Looking for bad clusters in user file data ...
      307696 files processed.                                                                File data verification completed.
    
    
    Stage 5: Looking for bad, free clusters ...
      107111457 free clusters processed.                                                        Free space verification is complete.
    
    
    Windows has scanned the file system and found no problems.
    No further action is required.
    
    
     498663259 KB total disk space.
      69622844 KB in 231443 files.
        166152 KB in 53794 indexes.
             0 KB in bad sectors.
        428431 KB in use by the system.
         65536 KB occupied by the log file.
     428445832 KB available on disk.
    
    
          4096 bytes in each allocation unit.
     124665814 total allocation units on disk.
     107111458 allocation units available on disk.
    
    
    Internal Info:
    00 b2 04 00 03 56 04 00 cd c6 08 00 00 00 00 00  .....V..........
    61 01 00 00 68 00 00 00 00 00 00 00 00 00 00 00  a...h...........
    
    
    Windows has finished checking your disk.
    Please wait while your computer restarts.
    Last edited by cobrakiller58; 04 Sep 2017 at 01:09. Reason: update
      My ComputerSystem Spec
  6.    04 Sep 2017 #6
    Join Date : Apr 2017
    Posts : 8,903
    windows 10 professional version 1607 build 14393.969 64 bit

    Please post a memory.dmp file

    After uninstalling Bitdefender, and replacing Nvidia please use windows driver verifier for 36 hours of typical computer use.

    If there is another bsod while using windows driver verifier please post a new zip.
      My ComputerSystem Spec
  7.    04 Sep 2017 #7
    Join Date : Apr 2017
    Posts : 8,903
    windows 10 professional version 1607 build 14393.969 64 bit

    Have you been able to locate the memory.dmp?


    file explorer > this PC > local C: drive > enter

    memory.dmp
    or
    %SystemRoot%\MEMORY.DMP
    or
    C:\Windows\MEMORY.DMP

    use one drive or drop box to post a share link



    The drive files are OK

    When you find the file on the computer can you zip it and then post it in a share link?

    Do you have 7zip or winzip?



    Please update the specs on the computer:

    How To Fill Out Your System Specs
    How To Fill Out Your System Specs
    System Specs - Fill in at Ten Forums:
    System Specs - Fill in at Ten Forums Windows 10 General Tips Tutorials
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forum




    Run HD Tune:

    http://www.hdtune.com/


    to check the health,
    scan for errors, no quick scan but full scan
    run a benchmark.


    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    the health,
    the error scan,
    the benchmark incl. following
    transfer rate,
    access time,
    burst rate,
    cpu usage.
    Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
    Last edited by zbook; 04 Sep 2017 at 01:54.
      My ComputerSystem Spec
  8.    04 Sep 2017 #8
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,345
    Windows 10 Pro X64 16299.19

    The latest dump is the same as the previous one and indicates a problem with ambakdrv.sys. Please uninstall Aomei Backupper and see if that makes a difference.
      My ComputersSystem Spec
  9.    04 Sep 2017 #9
    Join Date : Sep 2017
    Posts : 11
    Windows 10
    Thread Starter

    @Ztruker
    I've reconfirmed ambakdrv.sys Is no longer in my system32 folder so it shouldn't be capable of loading right? @zbook
    Had to leave the memory dump uploading over night here is the link Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
    My system specs were filled in at sign-up and appear to still be there but I'll post it here just to make sure it's visible.
    System Spec
    Computer type:PC/DesktopSystem Manufacturer/Model Number:Me
    OS:Windows 10
    CPU:Ryzen 7 1800x
    Motherboard:MSI X370 gaming pro carbon MS-7A32
    Memory:Corsair Vengeance LPX 32 GB CMK32GX4M2B3200C16
    Graphics Card(s):Asus ENGTX560 Ti DCII/2DI/1GD5

    I've now completed all steps in your first post, BSOD as soon as I used verifier again attaching latest dumpAttachment 151911
    HDtune results on my boot drive Samsung 960PRO SSD, health tab says N/A
    Attachment 151917Attachment 151918
    Last edited by cobrakiller58; 04 Sep 2017 at 12:11. Reason: update
      My ComputerSystem Spec
  10.    04 Sep 2017 #10
    Join Date : Apr 2017
    Posts : 8,903
    windows 10 professional version 1607 build 14393.969 64 bit

    For the memory dump it is a very large file and may take hours to download. Hopefully it will not have errors.

    For the system specs see these links:

    How To Fill Out Your System Specs
    How To Fill Out Your System Specs
    System Specs - Fill in at Ten Forums:
    System Specs - Fill in at Ten Forums Windows 10 General Tips Tutorials
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Please post information on: PSU, cooler, case, peripherals (mouse, keyboard, joystick) and anything attached to the computer by wireless or wired (printer, headset, xbox, etc.)
      My ComputerSystem Spec

 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
Repated BSOD (ndis.sys) - Often triggered by Windows Updates
I've been experiencing BSODs on my ASUS U56E laptop over the last ~1 year that used to be fairly intermittent but have gotten much more problematic (boot loops) as of late. These all seem to be related to driver issues with my network adapter(s),...
BSOD Crashes and Debugging
System going to sleep in Skyrim then becoming unresponsive.
I know this sounds like a 3rd party problem, but stay with me for a minute. So I'm playing Skyrim Special Edition and it runs fine with no crashing or other problems. Then I get a phone call that's going to take a few minutes so I pause the game...
BSOD Crashes and Debugging
Skyrim Fans!: Your Character's Name & Type?
Khajiit; basically a human shaped cat with a lot of fur and cat face ears and claws. Name: Kaen No Koda Fire Child ^^ POST YOURS BELOW..
Chillout Room
BSOD: DPC_WATCHDOG VIOLATON (Windows Update Triggered)
Hello there, Up until recently I've had no hiccups with Windows 10 (Enterprise). Unfortunately lately I've had to manually disable the Windows Update Service as otherwise a non-optional update seems to automatically get pushed through and...
BSOD Crashes and Debugging
Fallout 4 and Skyrim, massive framerate slowdowns
Hey guys. Having a problem with some games that I'm playing via Steam. Fallout 4 used to run flawlessly on my PC. One day, I turned it on and noticed that the graphics settings had been dropped to low. The framerate was also completely...
Gaming
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:38.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums