BSOD MACHINE_CHECK_EXCEPTION during every game

The unexpected shutdown was noted in the logs but there was no new bsod to debug.
There was a crash when you had used: Outlast2.exe

When available pleas post an image (camera photo) of the Memtest86+ version 5.01 test for 8 or more passes.
And please post images of the drive tests.

Code:

Event[22053]:  Log Name: System  Source: Microsoft-Windows-Kernel-Power  Date: 2017-09-18T22:55:12.876  Event ID: 41  Task: N/A  Level: Critical  Opcode: Info  Keyword: N/A  User: S-1-5-18  User Name: NT AUTHORITY\SYSTEM  Computer: DESKTOP-7EEKE55  Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Code:

Event[22042]:  Log Name: System  Source: EventLog  Date: 2017-09-18T22:55:16.184  Event ID: 6008  Task: N/A  Level: Error  Opcode: N/A  Keyword: Classic  User: N/A  User Name: N/A  Computer: DESKTOP-7EEKE55  Description: The previous system shutdown at 22:52:45 on ?18.?09.?2017 was unexpected.

Code:

18/09/2017 18:26    Windows Error Reporting    Fault bucket 129444236554, type 5
Event Name: RADAR_PRE_LEAK_64
Response: Not available
Cab Id: 0

Problem signature:
P1: Outlast2.exe
P2: 1.0.17517.0
P3: 10.0.15063.2.0.0
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
\\?\C:\Users\NICKPO~1\AppData\Local\Temp\RDR351A.tmp\empty.txt
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER351B.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3529.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER353A.tmp.txt

These files may be available here:


Analysis symbol: 
Rechecking for solution: 0
Report ID: 41ed9489-c59e-4da7-bc64-e5efae315ba3
Report Status: 268435456
Hashed bucket: a42ef6e2ca7caf5f31d25bb4123aa378

Sorry havent gotten around to do the memtest yet, I will

And I dont remember any outlast error, I actually just turned the game on into the main menu and had to leave for a little bit so I minimized it, came back around an hour later and just clicked close window so that´s strange

Memtest86+ version 5.01 is run by passes.
Memtest86+ - Advanced Memory Diagnostic Tool
Test for 8 or more passes and the more passes the better.
There is a significant number of false negatives if fewer than 8 passes are made.
A false negative is a pass result with malfunctioning RAM.
There is 16 GB RAM on the computer with 8 GB in 2 DIMM.
Memtest86+ version 5.01 testing takes approximately 1 -2 hrs /GB RAM.
Plan to start the test in the evening an allow it to test overnight.
Memtest86+ - Advanced Memory Diagnostic Tool
Testing must be continuous.
Just 1 error is a fail and you can abort testing.
Then test 1 RAM module at a time in the same DIMM to differentiate good from bad RAM.
If both RAM modules fail when tested together and pass when tested 1 at a time the DIMM / MB must be tested by moving 1 RAM module into another DIMM. Each test needs to to have 8 or more passes.

When Memtest86+ version 5.01 has completed 8 or more passes please use a camera or smart phone camera to take a picture and post an image into the thread.

http://www.memtest.org/https://answe...f-ecc7b7ff6461

MemTest86+ - Test RAM Windows 10 BSOD Tutorials

I think every time it froze or blue screened there was chrome in the background so it might be RAM related. When I switch from a demanding application using alt tab, it usually goes to chrome and thats when the freezes happened (most of them). I´ll run the tests

I followed the memtest guide but I don´t know how to boot up the USB in bios theres a lot of options, don´t wanna screw something up

Try #3 USB hard disk to boot order #1

Here is the result

The incorrect version of Memtest was run.
The correct version is Memtest86+ version 5.01
Memtest86+ - Advanced Memory Diagnostic Tool
Memtest86+ - Advanced Memory Diagnostic Tool
In the same DIMM test each RAM module for 8 or more passes using memtest86+ version 5.01.
When 8 or more passes have completed for each RAM module please use a camera or smart phone camera to take pictures and post images into the thread.
If there is just 1 error you can abort testing and then test the other RAM module.
If both RAM modules pass when tested in the same DIMM then move 1 RAM module to the next DIMM and test the DIMM for 8 or more passes.
The more passes the better. Sometimes it takes passes into the 20's to find malfunctioning RAM.

Didn´t double check the version my mistake. I´ll run it with 1 RAM. Is it safe to assume then that the RAM error is the cause of the blue screens?
In the meantime here´s another one.

BSOD can be caused by hardware drivers, software drivers, and hardware.
The BSODs have not displayed any misbehaving hardware or software drivers.
They displayed WHEA which when troubleshooted typically detects malfunctioning hardware.
So far the problem appears to be RAM and you will perform confirmatory testing by testing each RAM module.
The error on the Memtest86+ can be due to RAM /DIMM /Motherboard.
So the upcoming test results with or 8 or more passes on each RAM module in the same DIMM should produce useful information on the hardware.
If both RAM modules pass when tested 1 at a time in the same DIMM and fail when tested simultaneously more testing needs to be done to evaluate DIMM / Motherboard. A RAM module then needs to be moved to another DIMM and testing needs to be performed for 8 or more passes.
If the RAM module(s) fail when tested 1 at a time in the same DIMM then the RAM needs to be replaced.

The RAM modules have the same part number: Kingston KHX2133C14/8G