BSOD, SYSTEM_SERVICE_EXCEPTION and ATTEMPTED_EXICUTE_OF_NONEXICUTE_MEM

Okay I downloaded it, burnt it and popped it in but the computer doesn't seem to recognize it

Boot from USB Drive on Windows 10 PC Windows 10 Installation Upgrade Tutorials: Boot from USB Drive on Windows 10 PC Windows 10 Installation Upgrade Tutorials


Note
If you have fast boot or ultra fast boot enabled in your UEFI firmware settings, then you will need to temporarily disable fast boot or ultra fast boot to be able to boot from a USB.


How to Enable Fast Boot or Ultra Fast Boot in UEFI Firmware Settings for Windows: Enable or Disable Fast Boot in UEFI Firmware Settings for Windows Windows 10 Performance Maintenance Tutorials


1. Try another USB stick
2. Try all USB ports (2.0 and 3.0)
3. Maybe when using UEFI Bios u have temporarly switch to Legacy in BIOS settings
4. Turn off temporarily fast boot, secure boot, CSM if enabled

Alright little update, I'm nearly done testing ram stick 2 of 4 and so far no errors reported by the proper version of memtest86+

What were the steps that you made to use Memtest86+?

Please use a camera or smart phone camera to take pictures and post images of the results into the thread.

I downloaded the version that came with the usb installer, I pulled all the ram sticks except one, popped the use in and booted the computer up.

Memtest86+ launched on its own and started working.

Ive let it run 8 passes on each stick, I'm on the last stick right now and so far no errors have been found

Please use a camera or smart phone camera to post images of all of the test results into the thread.

Initially you had reported that you were not able to use Memtest86+ version 5.01.
Troubleshooting steps were suggested and then you were able to use Memtest86+ version 5.01.

Please post into the thread each step that you made to get Memtest86+ version to work as this may be helpful to others reading the thread.

Initially you had used different software: Memtest86 and got errors when testing all of the RAM modules at one time.
Have you tested all of the RAM modules at one time using Memtest86+ version 5.01?

Oh the first time around I was trying to use it on a DVD and I couldn't get it to launch, I found my thumbdrive this morning so I just installed it on there and it launched fine from there.

I've been testing one stick of RAM at a time today and so far they've all been clean of errors, this picture is of the the scan that's currently running on the final stick of RAM.

Attachment 150614

Now choose 1 of the RAM that passed 8 or more runs.
Move that RAM module into each DIMM.
Test each DIMM for 8 passes.
Please post images of each DIMM into the thread.
Please use the DIMM number when posting.
Please again make sure to use a camera to record every Memtest86+ version 5.01 result into the thread

The current test has only displayed 5 passes. That is insufficient.
It must have 8 or more passes before deciding whether it has passed or failed.

How many of the prior tests had 5 passes and not the complete 8 passes?

So just move it over a slot and run it again?

What do you mean post an image of each DIMM? Like just take a picture when I start the test for each slot or?

and how do I find out what the DIMM number is?

Approximately how much time is it taking to test each RAM module?

How many of the tests were for at least 8 passes?

How many of the tests were for fewer than 8 passes?