Page 2 of 10 FirstFirst 1234 ... LastLast
  1.    21 Aug 2017 #11
    Join Date : Aug 2017
    Posts : 51
    windows 10
    Thread Starter

    Quote Originally Posted by axe0 View Post
    A serial number is similar to a fingerprint or a citizen service number, all are unique but not private information.
    Do you need these #'s to assist further?
      My ComputerSystem Spec
  2.    21 Aug 2017 #12
    Join Date : Sep 2014
    DFW Area
    Posts : 439
    Windows 8&10

    The Dell systems normally install PCIe drives as SATA. Did you install yours as PCIe or SATA?

    I don't know about the 950 Pro but the 960 Pro runs fine as PCIe on my systems. I do not know the specifics of the 9550..

    I saw these in the Event Viewer. In many cases, errors and warnings are generated during power transitions but I cannot tell from a Text listing.

    File System Filter 'wcifs' (Version 10.0, ?2016?-?09?-?15T09:42:03.000000000Z) failed to attach to volume '\Device\HarddiskVolumeShadowCopy3'. The filter returned a non-standard final status of 0xC000000D. This filter and/or its supporting applications should handle this condition. If this condition persists, contact the vendor.

    The Trusted Platform Module (TPM) hardware on this computer cannot be provisioned for use automatically. To set up the TPM interactively use the TPM management console (Start->tpm.msc) and use the action to make the TPM ready.

    Error: The TPM provisioning action is not allowed by the specified flags. For provisioning to be successful, one of several actions may be required. The TPM management console (tpm.msc) action to make the TPM Ready may help. For further information, see the documentation for the Win32_Tpm WMI method 'Provision'. (The actions that may be required include importing the TPM Owner Authorization value into the system, calling the Win32_Tpm WMI method for provisioning the TPM and specifying TRUE for either 'ForceClear_Allowed' or 'PhysicalPresencePrompts_Allowed' (as indicated by the value returned in the Additional Information), or enabling the TPM in the system BIOS.)

    The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&0.

    An error was detected on device \Device\Harddisk2\DR3 during a paging operation.
      My ComputerSystem Spec
  3.    21 Aug 2017 #13
    Join Date : Oct 2016
    Posts : 326
    seL4

    The latest BIOS update released 8/1/17 for this model states that it improves NVMe support. I see you are running 1.2.19, so I'd suggest updating to the latest BIOS, Dell is extremely reliable with firmware updates so there is little risk.

    Dell XPS 15 9550 1.2.29 System BIOS Driver Details | Dell US


    I would also strongly recommend that you run Dell's official diagnostics. Reboot your computer and tap F12 repeatedly until you see a boot selection screen. Select "Diagnostics" and then run through the tests available. Please make sure you choose "extended testing" where available.

    When the test is finished it would be great if you could take a picture with a phone/camera and post it here.

    Here is Dell's official documentation on their built-in diagnostics.

    Resolve Hardware Issues With Built-in and Online Diagnostics (ePSA or PSA Error Codes) | Dell US
      My ComputerSystem Spec
  4.    21 Aug 2017 #14
    Join Date : Aug 2017
    Posts : 51
    windows 10
    Thread Starter

    Quote Originally Posted by Saltgrass View Post
    The Dell systems normally install PCIe drives as SATA. Did you install yours as PCIe or SATA?
    I did not know I had an option with this? Where would I look to find out how it was installed?
      My ComputerSystem Spec
  5.    21 Aug 2017 #15
    Join Date : Oct 2016
    Posts : 326
    seL4

    The 950 PRO uses NVMe (over PCIe) and the 850 EVO uses Sata III.
      My ComputerSystem Spec
  6.    21 Aug 2017 #16
    Join Date : Sep 2014
    DFW Area
    Posts : 439
    Windows 8&10

    In Device Manager look at Storage Controllers. If it shows NVMe then it is using that if it shows SATA then it is being used.

    On my system, since I have loaded the Samsung driver, it shows Samsung NVMe Controller.
      My ComputerSystem Spec
  7.    21 Aug 2017 #17
    Join Date : Jun 2015
    Posts : 12,864
    Windows 10 Pro

    Quote Originally Posted by carl pilkington View Post
    I did not know I had an option with this? Where would I look to find out how it was installed?
    If you check the BIOS you might be able to find how the drive is connected, I can't find much in the manual.
    Else you would need to open the laptop, which is not recommended if you have warranty.
      My ComputersSystem Spec
  8.    22 Aug 2017 #18
    Join Date : Aug 2017
    Posts : 51
    windows 10
    Thread Starter

    Quote Originally Posted by Saltgrass View Post
    In Device Manager look at Storage Controllers. If it shows NVMe then it is using that if it shows SATA then it is being used.On my system, since I have loaded the Samsung driver, it shows Samsung NVMe Controller.
    I see "microsoft storage space controller" and "samsung nvme controller"
      My ComputerSystem Spec
  9.    22 Aug 2017 #19
    Join Date : Aug 2017
    Posts : 51
    windows 10
    Thread Starter

    Quote Originally Posted by Spectrum View Post
    The latest BIOS update released 8/1/17 for this model states that it improves NVMe support. I see you are running 1.2.19, so I'd suggest updating to the latest BIOS, Dell is extremely reliable with firmware updates so there is little risk.

    Dell XPS 15 9550 1.2.29 System BIOS Driver Details | Dell US


    I would also strongly recommend that you run Dell's official diagnostics. Reboot your computer and tap F12 repeatedly until you see a boot selection screen. Select "Diagnostics" and then run through the tests available. Please make sure you choose "extended testing" where available.

    When the test is finished it would be great if you could take a picture with a phone/camera and post it here.

    Here is Dell's official documentation on their built-in diagnostics.

    Resolve Hardware Issues With Built-in and Online Diagnostics (ePSA or PSA Error Codes) | Dell US
    I will update the BIOS and and see if that has any effect on my issue.
    I ran all the dell diagnostics and everything passed. Attached images.
    Attached Thumbnails Attached Thumbnails IMG_2269.jpg   IMG_2271.jpg  
      My ComputerSystem Spec
  10.    22 Aug 2017 #20
    Join Date : Aug 2017
    Posts : 51
    windows 10
    Thread Starter

    Quote Originally Posted by Saltgrass View Post
    I saw these in the Event Viewer. In many cases, errors and warnings are generated during power transitions but I cannot tell from a Text listing.

    File System Filter 'wcifs' (Version 10.0, ?2016?-?09?-?15T09:42:03.000000000Z) failed to attach to volume '\Device\HarddiskVolumeShadowCopy3'. The filter returned a non-standard final status of 0xC000000D. This filter and/or its supporting applications should handle this condition. If this condition persists, contact the vendor.

    The Trusted Platform Module (TPM) hardware on this computer cannot be provisioned for use automatically. To set up the TPM interactively use the TPM management console (Start->tpm.msc) and use the action to make the TPM ready.

    Error: The TPM provisioning action is not allowed by the specified flags. For provisioning to be successful, one of several actions may be required. The TPM management console (tpm.msc) action to make the TPM Ready may help. For further information, see the documentation for the Win32_Tpm WMI method 'Provision'. (The actions that may be required include importing the TPM Owner Authorization value into the system, calling the Win32_Tpm WMI method for provisioning the TPM and specifying TRUE for either 'ForceClear_Allowed' or 'PhysicalPresencePrompts_Allowed' (as indicated by the value returned in the Additional Information), or enabling the TPM in the system BIOS.)

    The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&0.

    An error was detected on device \Device\Harddisk2\DR3 during a paging operation.

    I do not have any experience with errors like these. How do I attempt to fix them?
      My ComputerSystem Spec

 
Page 2 of 10 FirstFirst 1234 ... LastLast


Similar Threads
Thread Forum
Is it a trustworthy product Dell XPS15 ?
There were issues with (suspected to be) graphics. I am on the look out for a laptop for the purposes of photography photo editing. Regular visitors to this forum I felt will have better idea on the reliability of above laptop(I thought). Or...
Chillout Room
Realtek Audio On Dell Desktop Motherboard (Dell 8900 System)
Hello, I have a new Dell 8900 series desktop. (64 bit) Apparently has Realtek integrated audio on the Motherboard. The audio works fine, but the program that gives the user, me, options for adjusting the audio is really poor. ...
Drivers and Hardware
Dell XPS 13: Freezes on Dell logo on restart, but boots from cold fine
Morning - we just bought (our second) XPS 13 which I did a clean install of Windows 10 on (to claim back as much disk space as possible). All okay, except when selecting 'Restart' from the 'Start Button/Power', the computer freezes on the Dell logo,...
Installation and Upgrade
Dell Backup and Recovery Manager does not recognize my Dell
After the upgrade to Win 10 Pro from Win 7 Pro, my Dell Backup and Recovery Manager gives me an error message basically saying it does not recognize my Dell . Dell support suggested I contact Microsoft support as this new problem is due to the Win...
Backup and Restore
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:53.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums