Page 1 of 2 12 LastLast
  1.    13 Aug 2017 #1
    Join Date : Aug 2017
    Posts : 8
    Windows 10 Pro

    Suddenly many BSODs


    I was watching a stream for a while, when i closed firefox it caused a BSOD. After i turned the pc back on it started to constantly BSOD, sometimes right after getting into windows. There are various stop codes:


    • System_thread_exception_not_handled
    • System_service_exception
    • System_service_exception w/ "what failed: win32kbase.sys"
    • Kernel_security_check_failure
    • Memory_management


    I also started to randomly hear an annoying little sound from the HDD, like a faint bleep. I can sometimes hear it several times a minute, other times it more seldom. I've heard this before too, but it went away after a reboot but that doesn't seem to work now.

    Since i recently updated the audio driver, i have rolled it back in case it's the culprit.
      My ComputerSystem Spec
  2.    13 Aug 2017 #2
    Join Date : Nov 2015
    Posts : 2,863
    64bit Win 10 Pro ver 1709 Build 16299.64

    These errors seem to mainly relate to memory corruption. Lets start by testing your RAM. This will take a long time to complete but important to complete at least 8 passes.




    Suddenly many BSODs Diagnostic Test Suddenly many BSODs
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.

    Post a photo of the results to show us the information reported.
      My ComputersSystem Spec
  3.    13 Aug 2017 #3
    Join Date : Aug 2017
    Posts : 8
    Windows 10 Pro
    Thread Starter

    It would be strange if RAM is the issue, because i had an issue with the first kit, got sent a new one, and the pc have been working fine for several months. But i have started the memtest
      My ComputerSystem Spec
  4.    13 Aug 2017 #4
    Join Date : Aug 2017
    Posts : 8
    Windows 10 Pro
    Thread Starter

    wow. memtest got 1 pass, then shortly after starting the second pass there was 4096 errors. I've taken out one stick and restarted the memtest now. It's so extremely strange that the pc have been working 100% fine all this time. What are the odds of getting two defective kits?
      My ComputerSystem Spec
  5.    13 Aug 2017 #5
    Join Date : Aug 2017
    Posts : 8
    Windows 10 Pro
    Thread Starter

    well, i guess i should mark this as solved because of the errors in memtest. Thanks, philc43
      My ComputerSystem Spec
  6.    13 Aug 2017 #6
    Join Date : Nov 2015
    Posts : 2,863
    64bit Win 10 Pro ver 1709 Build 16299.64

    Were both sticks faulty? Did you try in different slots to rule out a motherboard slot problem?
      My ComputersSystem Spec
  7.    13 Aug 2017 #7
    Join Date : Aug 2017
    Posts : 8
    Windows 10 Pro
    Thread Starter

    still running memtest on the other stick, 8 passes 7h32m in with no errors. I suppose i should try this stick in the slot the other stick was in just to see if it might be an issue with the motherboard
      My ComputerSystem Spec
  8.    13 Aug 2017 #8
    Join Date : Apr 2017
    Posts : 8,666
    windows 10 professional version 1607 build 14393.969 64 bit

    When the memtest86+ has completed please post a DM log: BSOD - Posting Instructions - Windows 10 Forums
      My ComputerSystem Spec
  9.    13 Aug 2017 #9
    Join Date : Aug 2017
    Posts : 8
    Windows 10 Pro
    Thread Starter

    I posted the zip in the original post. But deleted it after i marked the thread as solved
      My ComputerSystem Spec
  10.    13 Aug 2017 #10
    Join Date : Apr 2017
    Posts : 8,666
    windows 10 professional version 1607 build 14393.969 64 bit

    If you can post a new zip we can then have reference information to troubleshoot problems.
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Solved PC won't boot up suddenly
I was just using my PC and suddenly got a BSOD coded 'BAD_POOL_CALLER'. The PC restarted itself and wouldn't boot up anymore. It goes through the Windows loading screen, shows a black screen then a blue screen : ...
General Support
Random BSODs - can be a few per day, or a few days between BSODs
Hi, I would really appreciate it if anyone could shed any light on this. The PC was originally Windows 7 and I upgraded to Windows 10 last year. The crashes seem to be random, sometimes when it's sitting idle, sometimes whilst I'm working. ...
BSOD Crashes and Debugging
Solved Suddenly everything become bigger
117459 Suddenly everything become bigger and i cant change back to normal.Someone please help me because it just automatically change.
General Support
USB printer suddenly not seen at all
Hi, I recently built a new PC with Windows 10. My printer is an Epson XP-760. It printed fine at first, but suddenly it wouldn't print. The printer showed as active, but print commands didn't even get to the printer's que. I tried other USB ports...
Drivers and Hardware
Solved Optimization not available suddenly on SSD
Hi, I have a strange problem. Suddenly optimization is not available for my SSD partitions in the Win 10 defrag tool. Before you say defrag is not done on SSD let me say that I checked and the Win 10 tool auto detects its SSD and preforms TRIM...
Performance & Maintenance
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:17.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums