Random multiple BSOD

Page 1 of 3 123 LastLast

  1. Posts : 15
    Windows 10
       #1

    Random multiple BSOD


    Hello,
    I have built a gaming PC last year and since day one I've been getting BSOD with typically this kind of messages: irql not less or equal page fault in nonpaged area.

    At that time, I think I handled that by disabling the automated page file.

    But since two days I keep having thoses BSODs again. While playing (most of the time) or just by using chrome.

    I tried to re-enable the default page size but it does not seems related this time.

    Attachment 146945

    Asus Z170-Ai5-6600K
    GTX 1070
    2 x G Skill Ripjaws F4-2133C15-8GRR
    CT250BX100SSD1 (250 GB, SATA-III) (Windows)
    Crucial_CT525MX300SSD1 (525 GB, SATA-III) (Games)

    Thanks for your help
      My Computer

  2. axe0's Avatar
    Posts : 14,792
    Windows 10 Pro
       #2




    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.
      My Computers


  3. Posts : 15
    Windows 10
    Thread Starter
       #3

    I ran Memtest last night (about 12hours).
    It complete 4 passes. Is it normal it took so long for only 4?

    I decided to reinstall windows. During installation I met 3 BOSD with similar error. The minidumps are here
    080317-4906-01.zip - Google Drive
      My Computer

  4. axe0's Avatar
    Posts : 14,792
    Windows 10 Pro
       #4

    16GB could take around 1 day to 2 days to reach 8 passes.

    At what phase was the installation process when each BSOD occured?
      My Computers


  5. Posts : 15
    Windows 10
    Thread Starter
       #5

    I might reconsider Memtest.

    It happened right after the installation wizard with preferences, mail, etc
    Last edited by Luds; 03 Aug 2017 at 16:43.
      My Computer


  6. Posts : 15
    Windows 10
    Thread Starter
       #6

    I just got a new one with BAD POOL Header.

    The BIOS has the default settings. Is there anything I should enable / disable?

    I can't explain why I have BSOD on fresh install.
      My Computer

  7. axe0's Avatar
    Posts : 14,792
    Windows 10 Pro
       #7

    The only reason is hardware or BIOS.

    I strongly suggest to perform the memory test a.s.a.p.
      My Computers


  8. Posts : 15
    Windows 10
    Thread Starter
       #8

    Thanks for info,
    I just launch a new Memtest on first ram stick. Wait and see.
      My Computer


  9. Posts : 15
    Windows 10
    Thread Starter
       #9

    Hi,
    Here is my last investigations/tries :
    I ran Memtest and had 8 passes without errors.
    I freshly reinstall Windows 10 on two differents SSD => BSOD after 1-10 min.

    In safemode I installed those two drivers (note I had to restart the service msiserver and make some change in registry to get it work )
    - Intel Management Engine
    - Intel Lan drivers

    => got BSOD after 2-3 min

    I disabled fastboot in bios.

    In safemode I never encounter BSOD, I'm writing this message from the computer in chrome.

    In safemode I can't run Windows updates

    Here is the last logs: Attachment 147662

    Thanks for the help
      My Computer

  10. axe0's Avatar
    Posts : 14,792
    Windows 10 Pro
       #10

    I don't presume you made a photo of Memtest result as requested?
    The photo does not only show the result of the test, but also specifications about the memory and CPU so we do not have to ask about them :)


    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

      My Computers


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:53.
Find Us




Windows 10 Forums