Page 1 of 2 12 LastLast
  1.    01 Aug 2017 #1
    Join Date : Aug 2017
    Posts : 7
    WIN PRO 10

    RANDOM STOPCODE - ntoskrnl.exe+16bfd0.


    Hi, getting random bluescreens with above error, I have just built the pc basically all new hardware - I have run memtest86 which was weird one failed and 3 passes. So does that mean the DDR4 RAM is faulty? I had unplugged all other hard drives and swapped over GPU. Did a clean install of windows and still the problem occurs.

    I have spoken to Microsoft and the said clear CMOS which I have done and if that fails speak to MSI regarding this error but no luck so far. I hoping someone with the knowledge more then me can advised would be grateful thanks in advanced.

    P.S. I don't have a bluescreen in safemode.

    elodsne.
    Last edited by elodsne; 01 Aug 2017 at 07:22.
      My ComputerSystem Spec
  2.    01 Aug 2017 #2
    Join Date : Aug 2017
    Posts : 7
    WIN PRO 10
    Thread Starter

    I done a GPU Stress test no problems however prime95 shows up this error

    "Prime 95 ERROR:rounding was 0.5 less than 0.4 and hardware failure "

    Any ideas

    Many Thanks
      My ComputerSystem Spec
  3.    01 Aug 2017 #3
    Join Date : Jan 2017
    Karlsruhe
    Posts : 730
    Windows 10 Pro

    Hi,
    theres only one bsod dump which shows memory_corruption at one point:

    Code:
    0x0000001E:    KMODE_EXCEPTION_NOT_HANDLED (1.08.2017 13:04:02) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
                   NTFS.sys [6.07.1994] * NT File System Driver (Windows System File) 
     
    PROCESS:       svchost.exe 
     
    Usual causes:  Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

    After reading your memtest results, the tests also failed:

    Code:
    Report Date 2017-07-31 22:45:51
    Generated by MemTest86 V7.4 Free (64-bit)
    Result FAIL
    Test # Tests Passed Errors
    Test 0 [Address test, walking ones, 1 CPU] 4/4 (100%) 0
    Test 1 [Address test, own address, 1 CPU] 4/4 (100%) 0
    Test 2 [Address test, own address] 4/4 (100%) 0
    Test 3 [Moving inversions, ones & zeroes] 4/4 (100%) 0
    Test 4 [Moving inversions, 8-bit pattern] 4/4 (100%) 0
    Test 5 [Moving inversions, random pattern] 4/4 (100%) 0
    Test 6 [Block move, 64-byte blocks] 3/4 (75%) 2
    Test 7 [Moving inversions, 32-bit pattern] 4/4 (100%) 0
    Test 8 [Random number sequence] 3/4 (75%) 1
    Test 9 [Modulo 20, ones & zeros] 4/4 (100%) 0
    Test 10 [Bit fade test, 2 patterns, 1 CPU] 4/4 (100%) 0
    Test 13 [Hammer test] 4/4 (100%) 0
    Last 10 Errors
    [Data Error] Test: 8, CPU: 8, Address: 11CC41DFC, Expected: 23BC2E84, Actual: 23B82E84
    [Data Error] Test: 6, CPU: 8, Address: 11F9225D8, Expected: 00000000, Actual: 00040000
    [Data Error] Test: 6, CPU: 8, Address: 11D9225F8, Expected: 00000000, Actual: 00040000
      My ComputerSystem Spec
  4.    01 Aug 2017 #4
    Join Date : Jan 2017
    Karlsruhe
    Posts : 730
    Windows 10 Pro

    To verify I recommend running Memtest V5.01 too:



    RANDON STOPCODE - ntoskrnl.exe+16bfd0. Diagnostic Test RANDON STOPCODE - ntoskrnl.exe+16bfd0.
     RAM TEST

    Run MemTest86+ V5.01 to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ V5.01 needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    More Info here: https://answers.microsoft.com/en-us/...f-ecc7b7ff6461


    Make a photo of the result and post it.
      My ComputerSystem Spec
  5.    01 Aug 2017 #5
    Join Date : Aug 2017
    Posts : 7
    WIN PRO 10
    Thread Starter

    Test has been running 5 mins found 3 errors .. Does this mean ram is at fault will post details after complete.
      My ComputerSystem Spec
  6.    01 Aug 2017 #6
    Join Date : Jan 2017
    Karlsruhe
    Posts : 730
    Windows 10 Pro

    Yes the RAM is gone...
      My ComputerSystem Spec
  7.    01 Aug 2017 #7
    Join Date : Aug 2017
    Posts : 7
    WIN PRO 10
    Thread Starter

    Make that 38 errors and counting, Corsair RAM DDR4 out the window just ordered myself a new lot should be here tomorrow.
    Last edited by elodsne; 01 Aug 2017 at 16:20.
      My ComputerSystem Spec
  8.    01 Aug 2017 #8
    Join Date : Apr 2017
    Posts : 8,670
    windows 10 professional version 1607 build 14393.969 64 bit

    There were operating system corruption problems reported in the event log.
    When you have properly functioning ram see if you can fix the operating system problem by:
    1) opening administrative command prompt and type or copy and paste:
    2) sfc /scannow
    3) dism /online /cleanup-image /checkhealth
    4) dism /online /cleanup-image /scanhealth
    5) dism /online /cleanup-image /restorehealth
    6) in case the above steps are unable to complete plan an in place upgrade repair using a windows 10 iso:
    Download Windows 10
    7) Repair Install Windows 10 with an In-place Upgrade Windows 10 Installation Upgrade Tutorials

    Code:
    Event[312]:  Log Name: System  Source: Microsoft-Windows-StartupRepair  Date: 2017-07-31T19:44:33.551  Event ID: 1121  Task: N/A  Level: Information  Opcode: Info  Keyword: N/A  User: S-1-5-18  User Name: NT AUTHORITY\SYSTEM  Computer: DESKTOP-NHBIA96  Description: The following file necessary for Windows start-up was corrupt: c:\windows\system32\drivers\tcpip.sys
    Code:
    Event[386]:  Log Name: System  Source: Microsoft-Windows-StartupRepair  Date: 2017-07-31T19:52:09.201  Event ID: 1121  Task: N/A  Level: Information  Opcode: Info  Keyword: N/A  User: S-1-5-18  User Name: NT AUTHORITY\SYSTEM  Computer: DESKTOP-NHBIA96  Description: The following file necessary for Windows start-up was corrupt: c:\windows\system32\drivers\spaceport.sys
    Code:
    Start-up Repair failed.
    Code:
    Event[599]:  Log Name: System  Source: Microsoft-Windows-WindowsUpdateClient  Date: 2017-08-01T12:16:05.622  Event ID: 20  Task: Windows Update Agent  Level: Error  Opcode: Installation  Keyword: Installation,Failure  User: S-1-5-18  User Name: NT AUTHORITY\SYSTEM  Computer: DESKTOP-NHBIA96  Description: Installation Failure: Windows failed to install the following update with error 0x80070103: Advanced Micro Devices, Inc driver update for AMD SMBus.
    Code:
    Event[49]:  Log Name: System  Source: Service Control Manager  Date: 2017-07-31T19:38:45.771  Event ID: 7023  Task: N/A  Level: Error  Opcode: N/A  Keyword: Classic  User: N/A  User Name: N/A  Computer: WIN-7IUN9R4SKTO  Description: The iphlpsvc service terminated with the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
      My ComputerSystem Spec
  9.    02 Aug 2017 #9
    Join Date : Jan 2017
    Karlsruhe
    Posts : 730
    Windows 10 Pro

    file system and os corruption could caused by defective memory so the first step should be replacing the RAM
      My ComputerSystem Spec
  10.    02 Aug 2017 #10
    Join Date : Aug 2017
    Posts : 7
    WIN PRO 10
    Thread Starter

    Ended up running the memetest over night had 381 errors so RAM is dud.. I got a replacement delivered this morning did a test found no errors then did a clean install of windows 10 pro, touch wood all seems ok. Now to RMA this RAM. Great help from BSODHUNTER and zbook for the advice given. I will post back in couple of days with an update.
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
BSOD when watching Youtube(videos) Stopcode is Watchdog Violation
Hi, I've been having BSODs for about a week now and it only happens when I'm watching videos on youtube (also happens when it is playing in the background), I've looked around for solutions but to no avail, I've recently tried a full reset which...
BSOD Crashes and Debugging
Solved Blue screen of death stopcode – CRITICAL SERVICE FAILED
On June 29th, as usual I was playing a heavily modded Skyrim that freezes and crashes a lot. I decided to stop playing and started photoshop to edit some screenshots from the game, but when I opened it, it gave me an error that said: “Photoshop...
BSOD Crashes and Debugging
BSOD when using Google Chrome (Different Error codes, usually STOPCODE
I am having a lot of BSOD errors, noticed it's when using chrome. Chrome will sometimes say "cannot display page" after it has already loaded a page. Then after doing this a few times (I reload page or whatever), it will BSOD completely. It seems...
BSOD Crashes and Debugging
Stopcode (BSOD I guess) when booting with HD or USB
Hello, I'm sort of wondering what to do so I'm posting here for the first time because I usually solve windows-related problems on my own. Can't this time it seems :(. Yesterday I was on my HP laptop like I always am. Then suddenly I received...
BSOD Crashes and Debugging
Solved BAD_POOL_MEMORY ntoskrnl.exe+142770 AND ntoskrnl.exe+142760
Hello everyone. I have been having some problems with my windows 10. I upgraded from windows 7 about one and a half month ago. I had many problems all around with multiple BSOD per week. I took up the opportunity to format my HDDs and did a...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:03.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums