BSOD within 30 minutes of computer start up every time

Hi Guys,

So basically I built a new PC, and I have had various BSOD's within 10-30 minutes of starting it up not matter what the computer is doing. I can start it up, walk away and come back and it has BSODed or I can be playing a game. However, if i restart the computer right after initial start up I get no BSODs at all.

I have attached the file as instructed. I think I fixed the first two BSOD problems, the service exception I am having a bit of an issue figuring out though and would appreciate any help.

System:
7900x
Gigabyte Gaming 9
64 Gigs of Corsair Vengeance RGB
2x 1080TI
One m.2 ssd,, 2 sata ssd's and 3 sata HDD's
Attachment 143920
Thanks!

Hi shmaded ,

There were 6 bsod files. When debugged they indicated multiple misbehaving drivers.
There were problems with the drives including corruption and bad blocks.

Open administrative command prompt and type or copy and paste:


1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


2) sfc /scannow


3) dism /online /cleanup-image /restorehealth




When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread

4) perform windows updates and post any failed KB# and error code into the thread

5) using administrative command prompt run chkdsk /x /r on your drives (this may take many hours so plan to run overnight

6) run one of the SMART tests on your drives:CrystalDiskInfo - Software - Crystal Dew World: CrystalDiskMark - Software - Crystal Dew World
Software - Crystal Dew World
HD Tune: http://www.hdtune.com/
Hard Disk Sentinel - HDD health and temperature monitoring: Hard Disk Sentinel - HDD health and temperature monitoring


When the SMART test has completed open the Microsoft snipping tool and make images of the results to post into the thread.



7) Run Sea tools for windows on your drive using SMART, short and long generic tests:

How to use SeaTools for Windows
http://www.seagate.com/support/downl...ls-win-master/
How to use SeaTools for Windows


8) Run memtest86+ version 5.01 for at least 8 runs. This may take many hours so plan to run it overnight.Memtest86+ - Advanced Memory Diagnostic Tool
When Memtest86+ has completed 8 or more runs make an image of the results to post into the thread.
Memory problems. - Microsoft Community
MemTest86+ - Test RAM Windows 10 BSOD Tutorials

9) uninstall: Acronis Virtual Disk Storage Filter using device manager
make sure the driver: vsflt53.sys is uninstalled
reinstall: Customer Service and Support

10) uninstall: Samsung RAPID Mode Disk Filter driver using device manager
make sure the driver samsungrapiddiskfltr.sys is uninstalled
reinstall: Samsung Download Center: Owner's Manuals, Firmware Updates & Drivers | Samsung US

11) uninstall: Intel RST Rapid Storage Technology driver iaStorA.sys using control panel
reinstall: Downloads for Intel® Rapid Storage Technology (Intel® RST)

Code:

A corruption was discovered in the file system structure on volume \\?\Volume{49b84a60-0033-11e4-9fa2-806e6f6e6963}.The Master File Table (MFT) contains a corrupted file record.  The file reference number is 0x1000000000000.  The name of the file is "<unable to determine file name>".

Code:

A corruption was discovered in the file system structure on volume \\?\Volume{49b84a60-0033-11e4-9fa2-806e6f6e6963}.The Master File Table (MFT) contains a corrupted file record.  The file reference number is 0x1000000000000.  The name of the file is "<unable to determine file name>".

Code:

A corruption was discovered in the file system structure on volume \\?\Volume{49b84a60-0033-11e4-9fa2-806e6f6e6963}.The Master File Table (MFT) contains a corrupted file record.  The file reference number is 0x1000000000000.  The name of the file is "<unable to determine file name>".

Code:

A corruption was discovered in the file system structure on volume D:.The Master File Table (MFT) contains a corrupted file record.  The file reference number is 0x1000000000000.  The name of the file is "<unable to determine file name>".

Code:

The device, \Device\Harddisk3\DR3, has a bad block.

Code:

BugCheck 3B, {c0000005, fffff8014b650c94, ffffda02035c3350, 0}Probably caused by : memory_corruptionFollowup: memory_corruption

Code:

BugCheck 18, {ffffe18ef6428b20, ffffe18f06ddc060, 1, 1}Probably caused by : ntkrnlmp.exe ( nt!ObfDereferenceObjectWithTag+13277c )

Code:

BugCheck 133, {1, 1e00, fffff803b1ffe348, 0}
Probably caused by : ntkrnlmp.exe ( nt!KeAccumulateTicks+124f2d )

Code:

ffffac01`45bf0668  fffff80a`98b1d182Unable to load image vsflt53.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for vsflt53.sys*** ERROR: Module load completed but symbols could not be loaded for vsflt53.sys vsflt53+0xd182

vsflt53.sys

Acronis Virtual Disk Storage Filter

Support: http://www.acronis.com/support/ Download: http://www.acronis.com/support/?TS=4-0

Code:

ffffac01`45bf03e8  fffff80a`98cd4d02Unable to load image SamsungRapidDiskFltr.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for SamsungRapidDiskFltr.sys*** ERROR: Module load completed but symbols could not be loaded for SamsungRapidDiskFltr.sys SamsungRapidDiskFltr+0x14d02

samsungrapiddiskfltr.sys

Samsung RAPID Mode Disk Filter driver

http://www.samsung.com/us/support/downloads

Code:

ffffac01`45befc60  fffff80a`9a2d2400Unable to load image iaStorA.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for iaStorA.sys*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys iaStorA+0x82400

iaStorA.sys

Intel RST (Rapid Storage Technology) driver

http://downloadcenter.intel.com/Default.aspx XP

Code:

BugCheck 133, {1, 1e00, fffff80386dee348, 0}
Probably caused by : ntkrnlmp.exe ( nt!KeAccumulateTicks+124f2d )

Code:

BugCheck 133, {1, 1e00, fffff802a09e8348, 0}
Probably caused by : ntkrnlmp.exe ( nt!KeAccumulateTicks+124f2d )

Code:

BugCheck 133, {1, 1e00, fffff8002e5fb348, 0}
Probably caused by : ntkrnlmp.exe ( nt!KeAccumulateTicks+124f2d )

1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)

@zbook
why do u need this? U can get this information from dxdiag.


dxdiag.txt

Code:

------------------
System Information
------------------
      Time of this report: 7/14/2017, 10:42:02
             Machine name: DAS-COMP
               Machine Id: Unknown
         Operating System: Windows 10 Pro 64-bit (10.0, Build 15063) (15063.rs2_release.170317-1834)
                 Language: English (Regional Setting: English)
      System Manufacturer: Gigabyte Technology Co., Ltd.
             System Model: X299 AORUS Gaming 9
                     BIOS: BIOS Date: 06/28/17 10:26:38 Ver: 05.0000D
                Processor: Intel(R) Core(TM) i9-7900X CPU @ 3.30GHz (20 CPUs), ~3.3GHz
                   Memory: 65536MB RAM
      Available OS Memory: 65230MB RAM
                Page File: 12926MB used, 56398MB available
              Windows Dir: C:\WINDOWS
          DirectX Version: DirectX 12
      DX Setup Parameters: Not found
         User DPI Setting: Using System DPI
       System DPI Setting: 96 DPI (100 percent)
          DWM DPI Scaling: Disabled
                 Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
           DxDiag Version: 10.00.15063.0000 32bit Unicode
  DxDiag Previously: Crashed in system information (stage 3). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information

I may get fussed at but do you know what AutoTune is and can you turn it off? Others can read dump files much better than I plus the fact Windbg does not seem to be picking up symbols correctly but it is mentioned in all your dump files.

It may be some driver associated with that process but I have seen Motherboard OEM utilities which have caused problems in the past.

AutoTune belongs to GIGABYTE EasyTune. I see AutoTune.exe in 3/5 dumps as main process. It is not impossible to rule out the EasyTune is responsible. And its known that EasyTune can cause bluescreens because of its intrusive overclocking functionalities.

But like @zbook wrote, main problem is the disk or something with the disk configuration.

You should backup your data NOW. Eventlog shows corruption AND data loss!!!

Hi Guys,

Thank for all the advice and help. After going though all the steps I was still having issues with drivers and whatnot. So instead of beating my head against the wall forever I just got a new M.2 drive and did a clean install of everything. Now, no more issues.

Thanks for everything though!

Glad to hear that your problem is now fixed. Let us know if there are any other problems.