Multiple BSOD's

See post #7
Memtest86+ was supposed to be done 3 weeks ago.
Use a camera or smart phone camera to take a picture and post an image into the thread.
There is a high incidence of false negatives if less than 8 passes are made.
A false negative is a pass when the RAM is malfunctioning.
Just 1 error is a fail.
If this happens you can abort testing and then test 1 RAM at a time in the same DIMM.


Once you have:
1) replaced each the Nvidia and Razer drivers
2) reset the bios
3) made sure that there is no over clocking
4) installed temperature monitoring software

Plan to check the CPU and GPU and drive.


1) download and install the Intel Processor Diagnostic Tool
When the test completes please use the Microsoft snipping tool to post an image into the thread.


Download Intel® Processor Diagnostic Tool: Download Intel® Processor Diagnostic Tool
The Intel® Processor Diagnostic Tool: The Intel® Processor Diagnostic Tool

2) Run Prime95 - Stress Test Your CPU
Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials

Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials
Please make note of the importance of temperature monitoring and aborting the test

Please use the Microsoft snipping tool to post images into the thread.

Take Screenshot in Windows 10 Windows 10 General Tips Tutorials

3) Run HD Sentinel:
Hard Disk Sentinel - HDD health and temperature monitoring
When it has completed please use the Microsoft snipping to make an image and post into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials

check the health,
scan for errors, no quick scan but full scan
run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
the health,
the error scan,
the benchmark incl. following
transfer rate,
access time,
burst rate,
cpu usage.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials

5) Run FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials

Please make note of the importance of temperature monitoring and aborting the test in the GPU link.

FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials:
FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials

All of these test should be done with the bios reset and no over clocking.

For each of the above tests please record maximum temperatures.

And please make sure that you use the Microsoft snipping tool to post images of each into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials