BSOD While Updating League of Legends and more.

Hi everyone,
I started getting almost all kinds of BSODs when gaming, transferring copying or pasting data files, surfing the internet or installing/updating apps, and to be honest am not sure when did the problem started I cant really remember, I have done everything I could but the problem persists, last thing I've tried is re-installing fresh windows 10 + formatting my storage HDD too so there is nothing on my pc at the moment except for an updated windows 10 pro, league of legends and steam ( only steam app nothing else no games nothing ).
After reinstalling windows I tried to check if it solved the problem by performing one of the actions which was causing BSOD ( Updating league of legends ) and I am still getting it.

Excuse me for my bad English and sorry for the boring story I've wrote its my first time and thanks for reading.

Code:

BugCheck 19, {e, ffffb38d89920070, 0, cc22deba34e84247}Probably caused by : memory_corruption

Code:

+++ WER1 +++:Fault bucket 0x19_e_nt!ExAllocatePoolWithTag, type 0Event Name: BlueScreenResponse: Not availableCab Id: 82d73009-e247-4f61-921f-27856f58e482Problem signature:P1: 19P2: eP3: ffffb38d89920070P4: 0P5: cc22deba34e84247P6: 10_0_15063P7: 0_0P8: 256_1P9: P10:

ExAllocatePoolWithTag routine (Windows Drivers)

Code:

Installation Failure: Windows failed to install the following update with error 0x80246013: NVIDIA - Display - 5/1/2017 12:00:00 AM - 22.21.13.8205.

Code:

Installation Failure: Windows failed to install the following update with error 0x80070103: Intel driver update for Intel(R) Management Engine Interface.

Code:

Windows failed fast startup with error status 0xC00000D4.

Code:

The Spooler service terminated with the following error: Ran out of memory

Open administrative command prompt and type or copy and paste:


1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


2) sfc /scannow


3) dism /online /cleanup-image /restorehealth


4) chkdsk /scan


When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread

5) turn off windows fast startup:


Turn On or Off Fast Startup in Windows 10 Windows 10 Performance Maintenance Tutorials

6) Run memtest86+ version 5.01 for at least 8 runs.
This may take many hours so plan to run it overnight.

http://www.memtest.org/https://answe...f-ecc7b7ff6461


When Memtest86+ has completed 8 or more runs make an image of the results to post into the thread.

all done except step 6, link is broken ( 404 not found ) error
no problem got it, thanks for the help.
ill be posting everything as soon as possible.

For Memtest86+ you will need a flash drive.
See instructions on the web site.
Memtest86+ - Advanced Memory Diagnostic Tool
Memory problems. - Microsoft Community

Attachment 143160

Would it be wise to continue the test

How many ram sticks and dim do you have?
16GB
8 GB on 1a
8GB on 1b
So you should test one RAM at a time in DIMM 1a
The aim now is to determine whether there is a problem with one or both RAMM
or whether there is a problem with the DIMM/MB
Test each RAM for 8 passes and post an image into the thread for each in DIMM 1a

I have 2 ram sticks not sure about dimm cause i dont know what does it mean, and was running test using them both

The RAM are inserted and removed from an attachment on the Motherboard(MB) called DIMM.
So you want to determine whether there is one or two bad RAM or whether there is a problem with the DIMM or MB.
You will now remove one RAM from the computer and run the Memtest86+ again with just one RAM in place for 8 passes.
If it fails you will remove it and place the other RAM in the same DIMM.
If it passes you will remove it and place the other RAM in the same DIMM.
That will test both RAM separately in the same DIMM.
If both RAM pass in the same DIMM you will then move the RAM to the next DIMM and repeat with just one of the RAM that had passed.
This then will enable you to determine the faulty and good RAM as well as whether the DIMM/MB is faulty.
Unfortunately this could take many hours now but when its done you will know where you stand on the hardware.

I'll test 1 stick a time and will post results.

Thank you for your patience.