Page 1 of 2 12 LastLast
  1.    07 Jul 2017 #1
    Join Date : Jul 2017
    Posts : 8
    Win 10

    BSOD with different error codes each time...


    I got a BSOD a few months ago and had to reinstall Win 7 (and then upgrade to Win 10). During the process, the network settings got fowled up, but Iíve since fixed all of that. PC was stable for a few of months but now I get the BSOD all the time and it gives different error codes each time. Iíve removed all USB but the KB and mouse. Removed, swapped and tested (MemTest86) the memory. Still doing it.Updated all drivers and BIOS.My main drive is a SSD - It seems to be running ok. My other drive is an SATA so unplugger it, but still the same.Any ideas?Here is the dmp file.Thanks Jamie
      My ComputerSystem Spec
  2.    07 Jul 2017 #2
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Hi,

    Code:
    0x00000133:    DPC_WATCHDOG_VIOLATION (5.07.2017 20:24:37) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       System
    Code:
    0x00000189:    BAD_OBJECT_HEADER (5.07.2017 18:24:50) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       OneDrive.exe
    Code:
    0x0000003B:    SYSTEM_SERVICE_EXCEPTION (5.07.2017 17:20:35) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       NVIDIA Web Helper.exe 
     
    Usual causes:  System service, Device driver, graphics driver, ?memory

    There are many different bugchecks in the dumpfiles.

    The cause for different error codes are usually hardware and lower level problems.

    U should begin with:



    BSOD with different error codes each time... Diagnostic Test BSOD with different error codes each time...
     RAM TEST

    Run MemTest86+ V5.01 to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ V5.01 needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    More Info here: Memory problems. - Microsoft Community


    Make a photo of the result and post it.
      My ComputerSystem Spec
  3.    07 Jul 2017 #3
    Join Date : Jul 2017
    Posts : 8
    Win 10
    Thread Starter

    Ok Thanks

    Not sure what this means though...

    I tested both sticks with MemTest86 overnight and found no errors.

    Thanks
      My ComputerSystem Spec
  4.    07 Jul 2017 #4
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    added stuff above. Did u use MemTest86+V5.01? How many passes did it run? Its important that it runs 8 passes ore more
      My ComputerSystem Spec
  5.    07 Jul 2017 #5
    Join Date : Jul 2017
    Posts : 8
    Win 10
    Thread Starter

    Hi

    I ran v7.3 and ran over night, so maybe 8-9 times, but no errors.

    Is there a different diagnostic I can test with?
      My ComputerSystem Spec
  6.    07 Jul 2017 #6
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Yes I would try the original one from here: Memtest86+ - Advanced Memory Diagnostic Tool
    Thats Version Memtest86+ V5.01 (27/09/2013)
      My ComputerSystem Spec
  7.    10 Jul 2017 #7
    Join Date : Jul 2017
    Posts : 8
    Win 10
    Thread Starter

    Hi

    Ok I ran Memtest86+ 5.01

    Module 1 has 14 passes 0 errors
    Module 2 has 23 passes 0 errors

    So Its not the RAM.
      My ComputerSystem Spec
  8.    10 Jul 2017 #8
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Can you provide us with the kernel memory dump please? Its located in C:\Windows\MEMORY.DMP.
    You can upload it to an cloud service like dropbox or onedrive.
      My ComputerSystem Spec
  9.    10 Jul 2017 #9
    Join Date : Jul 2017
    Posts : 8
    Win 10
    Thread Starter
      My ComputerSystem Spec
  10.    10 Jul 2017 #10
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    This is from MEMORY.DMP

    Code:
    0x0000000A:    IRQL_NOT_LESS_OR_EQUAL (7.07.2017 11:31:13) [Windows 10] 
     
    CAUSED BY:     ntoskrnl    
                   MBAMChameleon.sys [27.06.2017] * Malwarebytes Chameleon Protection Driver * => https://www.malwarebytes.org/chameleon/ If using this 
                   nvlddmkm.sys [27.06.2017] * nVidia Video drivers * => http://www.nvidia.com/Download/index.aspx  
     
    PROCESS:       chrome.exe 
     
    Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

    Theres the driver for Malwarebytes shown as cause. Please uninstall for testing purposes:
    Your should also remove McAffee and use Windows Defender instead for a while:
    McAfee McAfee Consumer Products Removal tool
    http://us.mcafee.com/apps/supporttools/mcpr/mcpr.asp
    PostProcess:
    If MCPR shows Incomplete uninstallation, restart the machine and run MCPR again.

    There are a lot of errors in windows eventlog which show that theres a problem with McAffee:
    Code:
    2017-07-05 16:32:49  Error: The password notification DLL "C:\Program Files\TrueKey\McAfeeTrueKeyPasswordFilter" failed to load with error 126. Please verify that the notification DLL path defined in the registry, HKLM\System\CurrentControlSet\Control\Lsa\Notification Packages, refers to a correct and absolute path (<drive>:\<path>\<filename>.<ext>) and not a relative or invalid path. If the DLL path is correct, please validate that any supporting files are located in the same directory, and that the system account has read access to both the DLL path and any supporting files.  Contact the provider of the notification DLL for additional support. Further details can be found on the web at http://go.microsoft.com/fwlink/?LinkId=245898. 
    2017-07-05 16:48:39  Error: The password notification DLL "C:\Program Files\TrueKey\McAfeeTrueKeyPasswordFilter" failed to load with error 126. Please verify that the notification DLL path defined in the registry, HKLM\System\CurrentControlSet\Control\Lsa\Notification Packages, refers to a correct and absolute path (<drive>:\<path>\<filename>.<ext>) and not a relative or invalid path. If the DLL path is correct, please validate that any supporting files are located in the same directory, and that the system account has read access to both the DLL path and any supporting files.  Contact the provider of the notification DLL for additional support. Further details can be found on the web at http://go.microsoft.com/fwlink/?LinkId=245898. 
    2017-07-05 17:12:25  Error: The password notification DLL "C:\Program Files\TrueKey\McAfeeTrueKeyPasswordFilter" failed to load with error 126. Please verify that the notification DLL path defined in the registry, HKLM\System\CurrentControlSet\Control\Lsa\Notification Packages, refers to a correct and absolute path (<drive>:\<path>\<filename>.<ext>) and not a relative or invalid path. If the DLL path is correct, please validate that any supporting files are located in the same directory, and that the system account has read access to both the DLL path and any supporting files.  Contact the provider of the notification DLL for additional support. Further details can be found on the web at http://go.microsoft.com/fwlink/?LinkId=245898.




    There are also "bad blocks" on your hard disks / file system found:
    Code:
    2017-06-27 19:18:39  Error: The device, \Device\Harddisk0\DR0, has a bad block.  
    2017-06-27 19:18:46  Error: The device, \Device\Harddisk0\DR0, has a bad block.  
    2017-07-03 11:40:14  Error: The device, \Device\Harddisk0\DR0, has a bad block.  
    2017-07-03 13:44:29  Error: The device, \Device\Harddisk1\DR1, has a bad block.  
    2017-07-03 13:45:08  Error: The device, \Device\Harddisk1\DR1, has a bad block.

    Two things u should do now. First one should be checking your SSD / hard disks. Second one should be repairing windows file system. All this can be done with those steps below:



    BSOD with different error codes each time... Diagnostic Test BSOD with different error codes each time...
     HDD TESTS

    Run HDTune to check health and scan for errors.



    Note   Note
    It may take some time, but look for signs of any errors or failure.

    You can also run a disk or health check using CrystalDiskInfo or chkdsk. Refer to the tutorial for details of how to do this.


    Take Screenshots of it and post it here.





    Repair Windows Filesystem:

    1. Open an elevated command prompt.
    2. In the elevated command prompt, type these five commands below, and press Enter:

    dism /Online /NoRestart /Cleanup-Image /RestoreHealth
    dism /Online /NoRestart /Cleanup-Image /StartComponentCleanup
    sfc /scannow
    chkdsk C: /F /R /X
    fsutil dirty set C:

    SFC:
    The SFC command scans the integrity of all protected system files and replaces incorrect versions with correct Microsoft versions.
    DISM:
    If a Windows image becomes unserviceable, you can use the Deployment Imaging and Servicing Management (DISM) tool to update the files and correct the problem.
    For example, you would use DISM to fix Windows component store corruption when a sfc /scannow command is unable to repair corrupted or modified system files because the component store (source) is corrupted.
    CHKDSK:
    Checking your drives for errors every once in a while can help fix some performance issues. Drive errors can usually be caused by bad sectors, improper shutdowns, bad software, corruption, physical damage, etc...
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
BSOD, changing error codes, usually after hibernation
Hello all. Where to start with this issue? Ever since I ran the upgrade to Windows 10 coming from Win 7 I am seeing BSODs. So I decided to get rid of any Win 7 remains, bought a new SSD and did a fresh install. The old Win 10 is still sitting on...
BSOD Crashes and Debugging
BSOD with diffirent error codes, as well as computer freezing.
I am having serious issues with my ASUS F555L laptop, not only do I get the BSOD, I also have the computer randomly freeze as well. This has been happening for a while now, I have already run system file checker, as well as reset the computer. This...
BSOD Crashes and Debugging
BSOD - Multiple error codes/bug checks
Attached is my dmp file. This has been happening for months. I reformatted/upgraded my PC recently to Windows 10, which leads me to believe that it shouldn't be a driver issue (I assume it's probably a hardware issue) But I was hoping you guys could...
BSOD Crashes and Debugging
Solved Infinite BSOD Loop, Various Error Codes
I did a teardown of my Windows 10 machine to clean all the parts and do some cable management and when I reassembled and restarted I had some issues. It started with a corrupted RAM BSOD, so I cleaned the connector pins on the RAM sticks with...
BSOD Crashes and Debugging
Multiple BSOD error codes
I updated from windows 7 the day that 10 launched and for a few days everything worked perfectly, then I crashed a few times, and today I crashed three times, all for different reasons. The first crash was a kernell_data_inpage_error. I did...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:36.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums