Code:
BugCheck 124, {0, ffffd30bd644b8f8, 0, 0}
Probably caused by : AuthenticAMD
Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffd30bd644b8f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.
Code:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: G:, DeviceName: \Device\HarddiskVolume5.
(A device which does not exist was specified.)
Code:
Crash dump initialization failed!
Code:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: G:, DeviceName: \Device\HarddiskVolume5.
Code:
{Delayed Write Failed} Windows was unable to save all the data for the file \Device\HarddiskVolume5\Games\steamapps\downl .. inematics\videos\golden_path\outro\OUT_050.vib. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
Code:
An error was detected on device \Device\Harddisk3\DR3 during a paging operation.
Open administrative command prompt and type or copy and paste:
1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)
2) sfc /scannow
3) dism /online /cleanup-image /restorehealth
When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread
4) chkdsk /x /f /r (this may take many hours to run so plan to run overnight)
Please find the report in eventvwr and post into the thread:
Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
5) perform windows updates and post any failed KB# with error code.
Make sure that there is no over clocking while troubleshooting.
Sometimes there are problems in the bios that produce bsod.
The bios in your computer: BIOS Version/Date Award Software International, Inc. FA, 4/23/2013
Please check to see if this is the most up to date version.
To ensure that there are no improper bios settings please reset the bios.
Sometimes there can be failure to boot after resetting the bios.
So please make sure your files are backed up.
Please make a backup image with Macrium:
Macrium Software | Macrium Reflect Free: Macrium Software | Macrium Reflect Free
And please create a restore point.
How to Clear Your Computers CMOS to Reset BIOS Settings:
How to Clear Your Computers CMOS to Reset BIOS Settings
3 Ways to Reset Your BIOS - wikiHow:
3 Ways to Reset Your BIOS - wikiHow
When testing for WHEA hardware errors we need to systematically check CPU, GPU, memory and drive.
Once the bios is reset and there is no overclocking:
Choose one of the temperature monitoring software applications: Speecy, HW monitor, Speed fan:
Speccy - Free Download - Piriform: Speccy - System Information - Free Download
HWMONITOR | Softwares | CPUID: HWMONITOR | Softwares | CPUID
SpeedFan - Access temperature sensor in your computer: SpeedFan - Access temperature sensor in your computer
1) download and install the Intel Processor Diagnostic Tool
When the test completes please use the Microsoft snipping tool to post an image into the thread.
Download Intel® Processor Diagnostic Tool: Download Intel® Processor Diagnostic Tool
The Intel® Processor Diagnostic Tool: The Intel® Processor Diagnostic Tool
2) Run Prime95 - Stress Test Your CPU
Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials
Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials
Please use the Microsoft snipping tool to post images into the thread.
3) Run memtest86+ version 5.01 for at least 8 runs.
This may take hours so plan to run it overnight.
Memtest86+ - Advanced Memory Diagnostic Tool
Memory problems. - Microsoft Community
MemTest86+ - Test RAM Windows 10 BSOD Tutorials
When Memtest86+ has completed 8 or more runs make an image of the results to post into the thread.
4) Run HD Sentinel:
Hard Disk Sentinel - HDD health and temperature monitoring
When it has completed please use the Microsoft snipping to make an image and post into the thread.
5) Run FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials
Please make note of the importance of temperature monitoring and aborting the test in the GPU link.
FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials: FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials
All of these test should be done with the bios reset and no over clocking.
For each of the above tests please record maximum temperatures.
And please make sure that you use the Microsoft snipping tool to post images of each into the thread.