Hey guys.
For the past 3 days I've been getting very frequent TDR BSODs. I haven't messed around with the GPU drivers since my last thread. In fact since my last thread everything was fine.. until 3 days ago. :/ dump extractions below.
Attachment 142107
Attachment 142108
Last edited by Kyle; 02 Jul 2017 at 07:16.
Hi IoNGeNeRaL,
There seems to be a lot of corruption in the file system which may indirectly be related to the 0x116
Attachment 142135
Note
Run the tests on all hard drives/partitions!
Please run HDTune first, in the order posted!
Run HDTune to
- check the health,
- scan for errors, no quick scan but full scan
- run a benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
- the health,
- the error scan,
- the benchmark incl. following
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run the long test.
Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log
Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to install as less as possible software using custom/advanced options, you can use this tutorial for the installation part
Code:5: kd> lmvm atikmdag Browse full module list start end module name fffff80a`03ee0000 fffff80a`05627000 atikmdag (deferred) Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys Image name: atikmdag.sys Browse all global symbols functions data Timestamp: Mon Nov 30 05:09:55 2015 (565BCC13) CheckSum: 016E7C2F ImageSize: 01747000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
atikmpag.sys ATI Video driver (remove the Catalyst Control Center and only install the Display Driver) http://support.amd.com/us/Pages/AMDSupportHub.aspx
Get from OEM for laptops
DPS !thread not available due to bad: Base ffffe18091bb3000 Limit ffffe18091bad000
Code:A corruption was discovered in the file system structure on volume K:.The Master File Table (MFT) contains a corrupted file record. The file reference number is 0x10000000045fd. The name of the file is "<unable to determine file name>".Code:A corruption was discovered in the file system structure on volume K:.The exact nature of the corruption is unknown. The file system structures need to be scanned and fixed offline.Code:The system failed to flush data to the transaction log. Corruption may occur in VolumeId: D:, DeviceName: \Device\HarddiskVolume9.Code:A corruption was discovered in the file system structure on volume C:.The exact nature of the corruption is unknown. The file system structures need to be scanned and fixed offline.Code:A corruption was discovered in the file system structure on volume C:.A corruption was found in a file system index structure. The file reference number is 0x1b00000003fb97. The name of the file is "\Windows\System32\SleepStudy". The corrupted index attribute is ":$I30:$INDEX_ALLOCATION".Code:A corruption was discovered in the file system structure on volume C:.A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x1b00000003fb97. The name of the parent directory is "\Windows\System32\SleepStudy". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the file that needs to be reconnected is 0x2c00000001dc29. There may be additional files on the volume that also need to be reconnected to this parent directory.Code:Corrupt lease file - possible data loss!Code:Source: Microsoft-Windows-StartupRepair Repaired the corrupted files from backup.Code:Volume C: (\Device\HarddiskVolume2) requires an Online Scan. An Online Scan will automatically run as part of the next scheduled maintenance task. Alternatively you may run "CHKDSK /SCAN" locally via the command line, or run "REPAIR-VOLUME <drive:> -SCAN" locally or remotely via PowerShell.Code:Volume E: (\Device\HarddiskVolume4) requires an Online Scan. An Online Scan will automatically run as part of the next scheduled maintenance task. Alternatively you may run "CHKDSK /SCAN" locally via the command line, or run "REPAIR-VOLUME <drive:> -SCAN" locally or remotely via PowerShell.Steps as above per Axe0!Code:Volume \\?\Volume{e333942e-78e7-11e4-8a25-806e6f6e6963} (\Device\HarddiskVolume1) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via PowerShell.
I don't have Windows installation on my K: drive. I do however have Microsoft Visual C++ on it. There does appear to be a Windows folder on it also with "3,643 Files, 158 Folders".. but when I open it it's empty.
I did the steps axe mentioned. Memory diagnostic has no issues. Screenshots below.
I am yet to do a chkdsk but whenever I do (even with sfc /scannow) it doesn't say anything is wrong with the system integrity.
Also on my desktop hard drive (last screenshot) the temperature is not that high. It's at a cool temperature as it sits on my desk.
Back up all of your files.
Create an image of your drives using Macrium or other imaging software.
Macrium Software | Macrium Reflect Free
Create a restore point.
The integrity of the operating system can be checked using administrative command prompt and typing or copy and pasting these commands:
1) sfc /scannow
2) dism /online /cleanup-image /restorehealth
Please report the results of scannow and restorehealth into the thread.
The chkdsk with the switch that axe0 ordered will take many hours. Plan to run it overnight.
To find the results in the eventvwr see these links:
Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
CHKDSK: What is it and how do I run it? - Ask Leo!
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!
How to find chkdsk results in Windows 10 - Winaero uses 26226 find
@zbook, multiple links for chkdsk isn't necessary :)
The only important link is the one that explains how to access the log and how to provide it, see below link.
Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums
Here are the results for the command prompt dism and a chkdsk log.
That appears to only be chkdsk by the speed.
The chkdsk /r will take many hours.
Was that with or without the /r switch?
That appears to only be chkdsk by the speed.
The chkdsk /r will take many hours.
Was that with or without the /r switch?
That was event 1001.
The event that you will want to check is 26226 after chkdsk /r has completed.
I haven't the time to do the chkdsk /r tonight. I'll do it tomorrow.
EDIT: As predicted; sfc /scannow reports no integrity violations.
Attachment 142204
Quote