Windows 10: BSOD PFN_List_Corruption

Page 1 of 2 12 LastLast
  1.    29 Jun 2017 #1

    BSOD PFN_List_Corruption


    I've been having trouble with BSOD lately on my computer. At first I believed it had to do with a single game, Playerunknowns Battleground, but while it still is far more frequent in this game (never lasts more than 15 minutes), I have had crashes in other games, during login and even 10-15 seconds after windows have apparently successfully killed off a non-responding game.

    Often the computer have locked up, not even resulting in a bluescreen, the last bluescreen I got stated "PFN_List_Corrupt". I've tried reinstalling and updating some drivers, also played using only 8 out of 16GB RAM and switch to see if one was faulty and ran a RAM test without faults.

    Starting to be at a loss as to what it can be, the PSU should offer sufficient power, but it is worth noting that it is getting old. At some point I had to reseat the RAM in order for the computer to successfully boot, which is why I've been focusing a bit towards the RAM to begin with.

    As far as I've been able to observe, there has never been a problem with temperature, few components ever go beyond 40-50C, and nothing have been clocked.

    I've added the minidumps I had available if that helps, if anyone has any idea, that would be appreciated.

    MSI X99A RAIDER 2011
    HyperX Predator DDR4 3200Mhz 16GB
    Intel i7-6800K
    MSI Geforce GTX 1070
    Thermaltake 1200W PSU
      My ComputerSystem Spec

  2.    29 Jun 2017 #2

    I have also ran a stress test on the GPU, temperature peaked at 85C, to me it looked as if this was desirable as it was clearly regulating around this point with the fans at about 70%. Also various chkdsk etc. for the SSDs.
      My ComputerSystem Spec


  3. Posts : 5,345
    Windows 10 Pro X64 16299.19
       29 Jun 2017 #3

    Please read and follow the instructions here: Blue Screen of Death (BSOD) Posting Instructions
      My ComputersSystem Spec

  4.    30 Jun 2017 #4

    Here are the additional files collected by the log tool.
      My ComputerSystem Spec

  5.    30 Jun 2017 #5




    BSOD PFN_List_Corruption Diagnostic Test BSOD PFN_List_Corruption
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.
      My ComputerSystem Spec


  6. Posts : 8,733
    windows 10 professional version 1607 build 14393.969 64 bit
       30 Jun 2017 #6

    Analyze v displaying memory.
    Thread and dps left few if any clues.

    Code:
    Dump file creation failed due to error during dump creation.
    Code:
    Start-up Repair failed.
    Code:
    Crash dump initialization failed!

    Open administrative command prompt and type or copy and paste:


    1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


    2) sfc /scannow


    3) dism /online /cleanup-image /restorehealth


    4) chkdsk /scan


    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread

    5) turn off Windows fast startup


    Turn On or Off Fast Startup in Windows 10 Windows 10 Performance Maintenance Tutorials

    6) confirm and or configure settings for minidmp:


    Keyboard: win + r keys simultaneously > type or copy and paste: sysdm.cpl > click advanced tab > under startup and recover click settings > under system failure uncheck automatically restart




    See this link: BSOD Finding and fixing them - Microsoft Community
    BSOD Finding and fixing them - Microsoft Community


    This is information about the needed 8 or more runs for Memtest86+ version 5.01 testing:
    http://www.memtest.org/https://answe...f-ecc7b7ff6461
      My ComputerSystem Spec

  7.    30 Jun 2017 #7

    Windows 10 Version 1703 (OS Build 15063.447)

    I had to give up on the memory test after 3 runs due to the time it took. I will start it up again when I know I have more time to let it run. It took more than 10 hours to complete 3 runs, is this usual given the specifications?

    Attachment 141914

    I also ensured the BIOS is now fully up to date without it helping the issue, is there any clue in the fact that certain games or situations consistently cause the BSOD more often? Best example would be Playerunknowns Battleground, a somewhat poorly optimized game consistantly crashing after 10-20 minutes of game time. While other games or programs can run days without a crash, though it does not crash exclusively to that game. Again, I have monitored temperatures prior to crashes and stress tested the GPU for about half an hour.

    I have already run the disk checks without finding errors, but I will try ones more following your steps.

    Microsoft Windows [Version 10.0.15063]
    (c) 2017 Microsoft Corporation. All rights reserved.


    C:\Windows\system32>winver


    C:\Windows\system32>sfc /scannow


    Beginning system scan. This process will take some time.


    Beginning verification phase of system scan.
    Verification 100% complete.


    Windows Resource Protection did not find any integrity violations.


    C:\Windows\system32>dism /online /cleanup-image /restorehealth


    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0


    Image Version: 10.0.15063.0


    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.


    C:\Windows\system32>
    I've disabled automatic restart and Fast startup.
      My ComputerSystem Spec


  8. Posts : 8,733
    windows 10 professional version 1607 build 14393.969 64 bit
       30 Jun 2017 #8

    The data for the memory is 16GB ram total with 4gb per dimm. That will take many hours so it is best to run it over night. The more runs the less likely there is a false negative.

    Please post the results of chkdsk /scan

    If the memory test displays errror then ram and dimm have to be checked.
    If the memory test displays no errors with at least 8 runs there is a tool that can be used to stimulate the drivers and find misbehaving drivers. This tool is already part of windows 10. Running windows driver verifier will continuously produce bsod unless it is turned off or unless all misbehaving drivers have been fixed. Each bsod should produce minidmp files. These files when evaluated will help us narrow down whether the bsod are coming from drivers, software or hardware. Once there are no more bsod you will use the tool for 36 hours with the computer under typical use. If there are no bsod then troubleshooting and preventative maintenance will be completed.
      My ComputerSystem Spec

  9.    30 Jun 2017 #9

    New Bluescreen, new error, this time DPC_WATCHDOG_VIOLATION.

    Some searching suggest old SSD driver incompatible with windows 8 or 10. My current OS SSD is somewhat old, currently running on an Kingston HyperX 3K SSD 120GB.

    Also in the system there's an Crucial MX300 750GB and an HyperX Savage 240GB.

    Since I tend to limit the OS hard drive to very few things I tend to use a small one for it, but could this SSD be an issue? Can I update these drivers or are they locked to factory drivers?

    Apologies, I see I forgot the chkdsk, here it is:
    Microsoft Windows [Version 10.0.15063]
    (c) 2017 Microsoft Corporation. All rights reserved.


    C:\Windows\system32>chkdsk /scan
    The type of the file system is NTFS.


    Stage 1: Examining basic file system structure ...
    204288 file records processed.
    File verification completed.
    7430 large file records processed.
    0 bad file records processed.


    Stage 2: Examining file name linkage ...
    269220 index entries processed.
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered to lost and found.


    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
    32467 data files processed.
    CHKDSK is verifying Usn Journal...
    36031528 USN bytes processed.
    Usn Journal verification completed.


    Windows has scanned the file system and found no problems.
    No further action is required.


    116639743 KB total disk space.
    39294188 KB in 137640 files.
    95628 KB in 32468 indexes.
    0 KB in bad sectors.
    313455 KB in use by the system.
    65536 KB occupied by the log file.
    76936472 KB available on disk.


    4096 bytes in each allocation unit.
    29159935 total allocation units on disk.
    19234118 allocation units available on disk.


    C:\Windows\system32>
      My ComputerSystem Spec


  10. Posts : 8,733
    windows 10 professional version 1607 build 14393.969 64 bit
       30 Jun 2017 #10

    Anytime you have a new bsod please update the zip file or post a new one in the thread:
    BSOD - Posting Instructions - Windows 10 Forums
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Good Afternoon, In the past couple of months, I've had multiple instances of BSOD and have tried to solve on my own; but to no avail, I have been unsuccessful and I am now here. Here's the BSOD messages that I have seen: 11/17 -...
Hello, So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible. Since last friday or so, i've suddenly encountered a...
Hello, so i think i have dealt with this bluescreen 3times now, and it seemed to have gone away after i went from my amd system to intel. But now its there again. The most useful function ever, wake from sleep, is now bluescreening my computer. I...
I recently upgraded my htpc from 8.1 pro to Win 10 pro. I have had multiple BSOD since then. 4 were for store exception not handled and the last 2 were for kmode exception not handled mv91xx.sys. Please advise.
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:32.
Find Us