1.    26 Jun 2017 #1
    Join Date : Nov 2016
    Posts : 2
    windows 10 Ver 1703 (OS Build 15063.413

    BSOD on wake up from sleep


    After a recent update, On wake up I am told that "attempted to write to read only memory"
    I have looked at the debug file and it says that a driver is at fault.
    How do I identify it and how do I replace it and from where?
      My ComputerSystem Spec
  2.    26 Jun 2017 #2
    Join Date : Jun 2015
    Posts : 12,854
    Windows 10 Pro




    BSOD on wake up from sleep Diagnostic Test BSOD on wake up from sleep
     DRIVER VERIFIER

    warning   Warning
    Please make a backup of your important files and get your rescue media or create one.
    Please create a restore point.

    Please follow this tutorial to run driver verifier.

    Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

    Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

    If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.

    Note   Note
    Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.






    BSOD on wake up from sleep Diagnostics Test BSOD on wake up from sleep
     HDD TEST

    Note   Note
    Run the tests on all hard drives/partitions!


    Note   Note
    Please run HDTune first, in the order posted!

    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.


    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run the long test.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Make a photo of the result and post it.

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Use option TWO with parameter /r
    Upload the chkdsk log Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums
      My ComputersSystem Spec
  3.    27 Jun 2017 #3
    Join Date : Apr 2017
    Posts : 8,615
    windows 10 professional version 1607 build 14393.969 64 bit

    Code:
    BugCheck BE, {ffff800028c05178, 8a00000000800121, ffff80002e11eca0, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffffe200ca602178, 8a00000000800121, ffffe200ce30d2e0, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffffa6015e607178, 8a00000000800121, ffffa6016060dca0, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffff9e8130402178, 8a00000000800121, ffff9e81312802e0, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffffc40016802178, 8a00000000800121, ffffc4001c49d2e0, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffff95009ba02178, 8a00000000800121, ffff95009d7a8130, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffff9681aee06178, 8a00000000800121, ffff9681b2cc82e0, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    BugCheck BE, {ffffb18103e06178, 8a00000000800121, ffffb18106346200, b}*** WARNING: Unable to verify checksum for win32k.sysProbably caused by : memory_corruption
    Code:
    Windows failed to resume from hibernate with error status 0xC0000001.
    Code:
    The Avira Web Protection service depends on the Avira Real-Time Protection service which failed to start because of the following error: After starting, the service hung in a start-pending state.
    Code:
    The device, \Device\Harddisk3\DR3, has a bad block.

    Open administrative command prompt and type or copy and paste:


    1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


    2) sfc /scannow


    3) dism /online /cleanup-image /restorehealth


    4) powercfg.exe /hibernate off

    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread

    5) chkdsk /r (this may take many hours, plan to run overnight)

    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
    CHKDSK: What is it and how do I run it? - Ask Leo!
    How do I see the results of a CHKDSK that ran on boot? - Ask Leo!
    How to find chkdsk results in Windows 10 - Winaero uses 26226 find



    6) Run a SMART tests on your HD and when it is complete please post images into the thread of the drive and the data.

    http://www.hdtune.com/


    7) run Sea tools for windows using SMART, short and long generic and report result into the thread.

    http://www.seagate.com/support/downl...ls-win-master/
    How to use SeaTools for Windows
      My ComputerSystem Spec
  4.    27 Jun 2017 #4
    Join Date : Jan 2017
    Karlsruhe
    Posts : 729
    Windows 10 Pro

    Rule 4
    No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc) - it is forum policy that no help shall be given to people who knowingly steal software or services.


    One of the main reasons for this is that the act of pirating the software will inevitably change the working of the software and make investigation and repair impossible. Please install a legitimate copy of the software and if you are still experiencing the issue we will be please to assist - No further assistance will be provided until we are satisfied that the software is genuine.
      My ComputerSystem Spec
  5.    27 Jun 2017 #5
    Join Date : Nov 2016
    Posts : 2
    windows 10 Ver 1703 (OS Build 15063.413
    Thread Starter

    @BOSDHunter
    My version of windows 10 Pro was an upgrade from a genuine and registered Windows 7 Pro.
    I have the disk here.
      My ComputerSystem Spec
  6.    27 Jun 2017 #6
    Join Date : Jan 2017
    Karlsruhe
    Posts : 729
    Windows 10 Pro

    Theres a tool which is used to bypass the activation of microsoft products. If you are sure you did not use a tool like this, maybe a friend or store tech did it without your knowledge.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Got BSOD trying to wake up pc in sleep mode
Hey guys when i tried to wake up my PC today in sleep mode i got a BSOD can you guys please help me out? thanku here is the file, also it happens once only to me i just want to know why i got the Blue screen and here is my computer specs OS:...
BSOD Crashes and Debugging
Solved PC slow to shutdown/restart & sleep/wake from sleep & fails to wake
Please delete - post needs to be rewritten
BSOD Crashes and Debugging
BSOD on wake from sleep, error: VIDEO_MEMORY_MANAGEMENT_INTERNAL (10e)
Hello there, My brother's PC has recently been upgraded with a new Nvidia graphics card and since then has begun to experience BSOD's whenever the PC is woken up from sleep (after manually putting the computer in sleep mode from the start menu.)...
BSOD Crashes and Debugging
video internal scheduler error BSOD. Wake from sleep bsod. (Re-appeare
Hello, so i think i have dealt with this bluescreen 3times now, and it seemed to have gone away after i went from my amd system to intel. But now its there again. The most useful function ever, wake from sleep, is now bluescreening my computer. I...
BSOD Crashes and Debugging
BSOD around the time I wake it up from sleep
I have tried to the get windows 10 windbg kit to work to look and see what wrong myself but I can't get the symbols to work... So my problem is that when waking up the computer it crashes about 25% of the time, it used to crash 100% on wake up...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:26.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums