Hi VSisaacsnipeR,
Code:
BugCheck C000021A, {ffffaf8425f07e50, ffffffffc0000006, ffffaf84260a7790, 0}----- ETW minidump data unavailable-----Probably caused by : memory_corruption
Code:
BugCheck EF, {ffff910561920080, 0, 0, 0}----- ETW minidump data unavailable-----Probably caused by : services.exe
Code:
The event logging service encountered a corrupt log file for channel Microsoft-Windows-Storage-ClassPnP/Operational. The log was renamed with a .corrupt extension.
Code:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: C:, DeviceName: \Device\HarddiskVolume2.(The I/O device reported an I/O error.)
Code:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: C:, DeviceName: \Device\HarddiskVolume2.
Code:
The MSICDSetup service failed to start due to the following error: This driver has been blocked from loading
Code:
The IO operation at logical block address 0x6ecd28 for Disk 0 (PDO name: \Device\00000037) failed due to a hardware error.
Code:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: C:, DeviceName: \Device\HarddiskVolume2.(The I/O device reported an I/O error.)
Code:
The IO operation at logical block address 0x12550d for Disk 0 (PDO name: \Device\00000037) failed due to a hardware error.
Code:
The password notification DLL "C:\Program Files\TrueKey\McAfeeTrueKeyPasswordFilter" failed to load with error 126. Please verify that the notification DLL path defined in the registry, HKLM\System\CurrentControlSet\Control\Lsa\Notification Packages, refers to a correct and absolute path (<drive>:\<path>\<filename>.<ext>) and not a relative or invalid path. If the DLL path is correct, please validate that any supporting files are located in the same directory, and that the system account has read access to both the DLL path and any supporting files. Contact the provider of the notification DLL for additional support. Further details can be found on the web at http://go.microsoft.com/fwlink/?LinkId=245898.
Code:
The IO operation at logical block address 0xcfdae60 for Disk 0 (PDO name: \Device\00000037) failed due to a hardware error.
Code:
The Software Protection service failed to start due to the following error: Error performing inpage operation.
Code:
The Sync Host_6e741 service terminated with the following error: A dynamic link library (DLL) initialization routine failed.
Code:
The password notification DLL "C:\Program Files\TrueKey\McAfeeTrueKeyPasswordFilter" failed to load with error 126. Please verify that the notification DLL path defined in the registry, HKLM\System\CurrentControlSet\Control\Lsa\Notification Packages, refers to a correct and absolute path (<drive>:\<path>\<filename>.<ext>) and not a relative or invalid path. If the DLL path is correct, please validate that any supporting files are located in the same directory, and that the system account has read access to both the DLL path and any supporting files. Contact the provider of the notification DLL for additional support. Further details can be found on the web at http://go.microsoft.com/fwlink/?LinkId=245898.
Code:
The MSICDSetup service failed to start due to the following error: This driver has been blocked from loading
Code:
Startup Repair failed.
Code:
The system failed to flush data to the transaction log. Corruption may occur in VolumeId: C:, DeviceName: \Device\HarddiskVolume2.(The request failed due to a fatal device hardware error.)
Please backup all of your files if not already done.
You can use Macrium to create an image.
Macrium Software | Macrium Reflect Free
Have you been doing any overclocking or do you use software or hardware raid?
Open administrative command prompt and type or copy and paste:
1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)
2) sfc /scannow
3) dism /online /cleanup-image /restorehealth
4) chkdsk /scan
When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread
5) Run memtest86+ version 5.01 for at least 8 runs. This may take hours so plan to run it overnight.Memtest86+ - Advanced Memory Diagnostic Tool
Memory problems. - Microsoft Community
When the memtest86+ has completed 8 or more runs please use the windows snipping tool to create and image and post into the thread.
6) Run one of these SMART tests on your drives:
CrystalDiskInfo - Software - Crystal Dew World
http://www.hdtune.com/
Hard Disk Sentinel - HDD health and temperature monitoring
7) Uninstall all nvidia software/applications
Use Display Driver Uninstaller and install new drivers from your Graphics card manufacturer or from the NVidia website. When you do this be sure the "clean install" box is checked and only install the Graphics driver and the PhysX driver.Display Driver Uninstaller Download version 17.0.6.7
8) Uninstall any MSI\Gaming software/drivers. If would be optimal to reinstall after the bsod troubleshooting. If you need them now then reinstall new software/drivers.
9) Uninstall all Mcafee using the Mcafee uninstaller: Antivirus Software, Internet Security, Spyware and Malware Removal McAfee