BSOD Constantly with different errors and .sys files

After about 7 hours of healthy use, 2 BSOD's came in a few minutes apart. First one didn't even make it to the full BSOD (see attached images).
Attachment 139952

Dumps are attached as well.

I just installed a few other "chipset drivers":

Support for Inspiron 15 7569 2-in-1 | Drivers downloads | Dell US



Attachment 139951

Attachment 139953

There was a new crash dump file but I'm not getting any useful information.

Code:

BugCheck 50, {ffff8a00a47a337e, 2, fffff8014e449a2a, 2}


Could not read faulting driver name
Probably caused by : memory_corruption

Whatever driver is causing this is still a mystery.

Glad you found some new chipset drivers, lets see if this has helped. :)

One more try?
Attachment 139961

I stopped running verifier though. Should I keep it running? (does it add information to the dumps or does it just force BSOD faster?)

How long did you run it for. Only run verifier for a maximum of 48 hours. It systematically tests every non-Microsoft driver in the background and records a BSOD for any that fail which we can check via the log files.

I ran it for around 30 hours previously. It didn't run yesterday or today yet

Also, you never answered my question in post #7:

You also said you had tested your RAM - did you use memtest86+ and did you let it run for 8 or more passes?

Ahh sorry I missed that! I reran it yesterday for 12 passes and it passed with no errors. I just enabled verifier again. The blue screens keep coming.

There are 3 new dumps:Attachment 140270

Hey, I got a BSOD with verifier running finally. Attached is latest.

Thank you!
Attachment 140353

I checked the BSOD but it was not one triggered by driver verifier - it was an IRQL_NOT_LESS_OR_EQUAL (a) and the analysis points to possible hardware failure.

Code:

MODULE_NAME: hardware

FAILURE_BUCKET_ID:  IP_MISALIGNED

Your RAM seemed to check out OK, please test your GPU and also your hard disk.

Diagnostic test

 GPU TEST

Run Furmark to test your GPU. Furmark tutorial

   Note

Run Furmark for around 30 minutes

   Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

Diagnostics Test

 HDD TEST

Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Got BSOD with a diff error and a win32ksys dll file.

Furmark ran okay without any artifacts.

Attached is the dump with newest BSOD along with the health, error and benchmark scan screenies:

Attachment 140374
Attachment 140376Attachment 140377Attachment 140375