Bsod faulty_hardware_corrupted_page

Please check my upload.

The full set of files would give us more information as requested at the top of the page.

A 12B error is nearly always a memory hardware problem.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.

Here is as requested

Please use the DM log collector so we can view your logs. I cannot view rar files. BSOD - Posting Instructions - Windows 10 Forums

Its already done sir on my 2nd reply. tnx

Had to refresh the page to see your new post. Thx.

Code:

BugCheck 12B, {ffffffffc00002c4, 888, 28a04a887e0, ffffd0009b609000}

Probably caused by : hardware ( REGION_PAGED_OUT )

Open administrative command prompt and type or copy and paste these commands:
1) sfc /scannow
2) dism /online /cleanup-image /restorehealth
3) chkdsk /scan

Please post into the forum the results of these 3 administrative command prompt commands.

There was no specific driver identified in the debugging.
Other hardware can be checked pending the memtest86+

Im doing memtest now. Will post after finish

here are the request. tnx

That's found the problem! Replace your RAM.

Thanks!

The memtest86 must have no errors even above 10 test?