Page 2 of 2 FirstFirst 12
  1.    17 Jun 2017 #11
    Join Date : Jun 2015
    Posts : 12,856
    Windows 10 Pro

    Could you run following tests on all drives please.
    If you already ran a test on a drive, please skip it.
    In the case of chkdsk we would like to have a log




    BSOD on startup ntoskrnl.exe / ntfs.sys (MEMORY MANAGEMENT) Diagnostics Test BSOD on startup ntoskrnl.exe / ntfs.sys (MEMORY MANAGEMENT)
     HDD TEST

    Note   Note
    Run the tests on all hard drives/partitions!


    Note   Note
    Please run HDTune first, in the order posted!

    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.


    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run the long test.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Make a photo of the result and post it.

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Use option TWO with parameter /r
    Upload the chkdsk log Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums
      My ComputersSystem Spec
  2.    18 Jun 2017 #12
    Join Date : Jun 2017
    Posts : 18
    Windows 10 64bit
    Thread Starter

    Hey. I've been busy and I will run chkdsks on all drives a bit later. I ran only on C: and it showed no errors but I will post logs a bit later.
    For now here are screenshots from HDTune. I know my Maxtor is problematic

    Attachment 140048Attachment 140049Attachment 140050Attachment 140051Attachment 140052
      My ComputerSystem Spec
  3.    18 Jun 2017 #13
    Join Date : Jun 2015
    Posts : 12,856
    Windows 10 Pro

    If possible, could you please disconnect the Maxtor drive while troubleshooting the issue
      My ComputersSystem Spec
  4.    18 Jun 2017 #14
    Join Date : Jun 2017
    Posts : 18
    Windows 10 64bit
    Thread Starter

    If the issue is the startup BSOD it's already gone If not - i will do this!
      My ComputerSystem Spec
  5.    20 Jun 2017 #15
    Join Date : Jun 2017
    Posts : 18
    Windows 10 64bit
    Thread Starter

    No more BSODs so I will close the thread (mark it as solved) and again - thank you all for ur help!
      My ComputerSystem Spec

 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
BSOD ntfs.sys and ntoskrnl.exe crashing (System Service Exception)
Hello, The story so far of my problem can be found here: http://www.tomshardware.co.uk/forum/id-3431549/system-service-exception-bsod.html#19774688 Tl;dr: got a brand new PC, crashing constantly, at the moment I'm on the clean installation of...
BSOD Crashes and Debugging
BSOD at random times, ntoskrnl.exe or ntfs.sys or hal.dll cause it
I've been having BSODs for a few months now and only now just got around to looking at the memory dumps to find the cause. Unfortunately, it only shows ntoskrnl.exe, ntfs.sys or hal.dll as the causes, which leaves me unsure with what to do since...
BSOD Crashes and Debugging
Solved BSOD hal.dll+2901, ntoskrnl.exe+19dc04, SynTP.sys+3da5c, NTFS.sys
Hello, Over the last few days I have received 2 BSOD with no visible pattern. They were on 8/2/16 and 8/5/16. The first one blamed NTFS.sys and ntoskrnl.exe and the second one blamed hal.dll, ntoskrnl.exe, SynTP.sys. I have not done anything such...
BSOD Crashes and Debugging
BSOD Memory management ?
Been getting this weird bluescreen just in the last few days, I don't think it's ram because I've ran memtest and 0 errors
BSOD Crashes and Debugging
BSOD caused by NTFS.sys & ntoskrnl.exe on a brand new PC.
There's not much to explain as it can occur randomly, I am guessing it is some driver conflict but I am not tech savvy, regardless, the BSODs are caused by NTFS.sys and ntoskrnl.exe. Here's an image from BlueScreenView 40292
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:12.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums