1.    08 Jun 2017 #1
    Join Date : Jun 2017
    Posts : 9
    windows 10

    BSOD on start up of my PC. I think it has to be drivers


    I've been getting BSODS left and right on pc my for the past 2 weeks. I can only boot onto my PC thru Safe Mode from the Error Recovery Screen with the code: 0xc0000001. I used Blue Screen Viewer and it seems that ntoskrnl.exe is the problem. Please help, i'm really tired of this.


    Attachment 138550
      My ComputerSystem Spec
  2.    09 Jun 2017 #2
    Join Date : Jan 2017
    Karlsruhe
    Posts : 729
    Windows 10 Pro

    There are many different bugchecks in the dumpfiles.

    The cause for different error codes are usually hardware and lower level problems.

    U should begin with:



    BSOD on start up of my PC. I think it has to be drivers Diagnostic Test BSOD on start up of my PC. I think it has to be drivers
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.
      My ComputerSystem Spec
  3.    09 Jun 2017 #3
    Join Date : Jun 2017
    Posts : 9
    windows 10
    Thread Starter

    Quote Originally Posted by BSODHunter View Post
    There are many different bugchecks in the dumpfiles.

    The cause for different error codes are usually hardware and lower level problems.

    U should begin with:



    BSOD on start up of my PC. I think it has to be drivers Diagnostic Test BSOD on start up of my PC. I think it has to be drivers
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.
    I have ran the memtest many times before in my ram and i havent found errors yet.
      My ComputerSystem Spec
  4.    10 Jun 2017 #4
    Join Date : Apr 2017
    Posts : 8,639
    windows 10 professional version 1607 build 14393.969 64 bit

    Code:
    BugCheck 10D, {7, 0, ffffac004075fb00, ffff8a8c56d15e20}Probably caused by : intelppm.sys ( intelppm!AcpiEvaluateMethod+e7 )
    Code:
    BugCheck 50, {ffff9c8c7283d6c0, 0, fffff800c0acc13b, 2}*** WARNING: Unable to verify timestamp for nvlddmkm.sys*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sysCould not read faulting driver nameProbably caused by : memory_corruptionFollowup:     memory_corruption
    Code:
    BugCheck 1A, {404, ffff82f382c79648, a6c0000002d90963, ffff82f782c79648}Probably caused by : memory_corruptionFollowup:     memory_corruption---------
    Code:
    BugCheck 19, {d, ffff85874f5e3500, ad16c96d2b7f1ce3, ad16c9692b7f1ce3}Probably caused by : Pool_Corruption ( nt!ExFreePool+d0a )Followup:     Pool_corruption
    Code:
    Sound Tab 1: This computer cannot play audio because the Windows Audio service is not enabled.  Use the Sounds and Devices Properties control panel to enable audio. No sound card was found.  If one is expected, you should install a sound driver provided by the hardware manufacturer.
    Code:
    Windows failed fast startup with error status 0xC00000D4.
    Code:
    Details about wireless network adapter diagnosis: For complete information about this session see the wireless connectivity information event.Helper Class: Native Wi-Fi MSM Initialize status: SuccessInformation for connection being diagnosed Interface GUID: 66a1b8ea-a9e0-4993-8e62-72b916a7c18d Interface name: Realtek RTL8190 802.11n Wireless LAN (Mini-)PCI NIC Interface type: Native Wi-Fi Profile: JaysWifi SSID: JaysWifi SSID length: 8 Connection mode: Infra Security: Yes Connect even if network is not broadcasting: NoResult of diagnosis: Problem foundRoot cause:Wireless association to "JaysWifi" failed for an unknown reasonDetailed root cause:802.11 connection failed due to status code 1: unspecified failureRepair option:Try connecting to "JaysWifi" againIf the problem continues, try resetting the access point, or contact the network administrator or your hardware manufacturer for further assistance.
    Code:
    The Network Diagnostics Framework failed to execute the following repair: Repair option: Resetting your wireless network adapterThis will disable and then enable the network adapter "Wi-Fi" on this computer.
    Code:
    The Network Diagnostics Framework has completed the diagnosis phase of operation. The following repair option was offered: Helper Class Name: RNWF MSM Helper ClassRoot Cause: Wireless association to "JaysWifi" failed for an unknown reason
    Code:
    The Network Diagnostics Framework failed to execute the following repair: Repair option: Resetting your wireless network adapterThis will disable and then enable the network adapter "Wi-Fi" on this computer. RepairGuid: {07D37F7B-FA5E-4443-BDA7-AB107B29AFB9}
    Code:
    Windows failed fast startup with error status 0xC00000D4.
    Code:
    The attempt by user DESKTOP-06R10FG\Jayzilla to restart/shutdown computer DESKTOP-06R10FG failed
    Code:
    Crash dump initialization failed!
    Code:
    The attempt by user DESKTOP-06R10FG\Jayzilla to restart/shutdown computer DESKTOP-06R10FG failed
    Code:
    Crash dump initialization failed!
    Code:
    The wcifs service failed to start due to the following error: The file or directory is corrupted and unreadable.
    Code:
    The luafv service failed to start due to the following error: The file or directory is corrupted and unreadable.
    Code:
    The Audiosrv service depends on the AudioEndpointBuilder service which failed to start because of the following error: The file or directory is corrupted and unreadable.
    Code:
    The NativeWifiP service failed to start due to the following error: The file or directory is corrupted and unreadable.
    Code:
    The WlanSvc service depends on the Wcmsvc service which failed to start because of the following error: The file or directory is corrupted and unreadable.
    Code:
    The HTTP service failed to start due to the following error: The file or directory is corrupted and unreadable.
    Code:
    The Spooler service depends on the HTTP service which failed to start because of the following error: The file or directory is corrupted and unreadable.
    Code:
    The WbioSrvc service depends on the wudfsvc service which failed to start because of the following error: The file or directory is corrupted and unreadable.
    Code:
    The bowser service failed to start due to the following error: The file or directory is corrupted and unreadable.
    Code:
    The LanmanWorkstation service depends on the bowser service which failed to start because of the following error: The file or directory is corrupted and unreadable.
    Code:
    The driver \Driver\iaLPSS2_UART2 failed to load for the device PCI\VEN_8086&DEV_A127&SUBSYS_79781462&REV_31\3&11583659&0&F0.
    This is the closest match from John Carrona:
    Code:
    iaLPSS2i_I2C.sys Intel® Serial IO I2C host controller driver http://downloadcenter.intel.com/
    Code:
    The system volume was corrupt.
    Code:
    A corruption was discovered in the file system structure on volume C:.The exact nature of the corruption is unknown.  The file system structures need to be scanned online.




    In the event logs there were lots of network failures and file corruption.
    Open administrative command prompt and type or copy and paste these commands:
    1) sfc /scannow
    2) dism /online /cleanup-image /restorehealth
    3) chkdsk /x/ f/ r (this may take many hours, plan to run overnight)
    4) Uninstall and reinstall this Intel driver: intelppm.sys
    5) Uninstall and reinstall this Intel driver: iaLPSS2i_I2C.sys
    6) open device manager and expand Network adapters. Uninstall and reinstall Ethernet and wireless drivers
    7) Turn windows fast startup off: Turn On or Off Fast Startup in Windows 10 Windows 10 Performance Maintenance Tutorials
    8) run memtest86+ version 5.01 for at least 8 runs: Memtest86+ - Advanced Memory Diagnostic Tool
    9) run HD sentinel

    Please post the results of scannow, restorehealth and chkdsk into the forum


    For the chkdsk report:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials


    get-winevent -FilterHashTable @{logname="Application"; id="1001"}| ?{$_.providername –match "wininit"} | fl timecreated, message | out-file Desktop\CHKDSKResults.txt

    Or use eventvwr find menu and enter 26226

    CHKDSK: What is it and how do I run it? - Ask Leo!
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
      My ComputerSystem Spec
  5.    10 Jun 2017 #5
    Join Date : Jan 2017
    Karlsruhe
    Posts : 729
    Windows 10 Pro

    Nice finds zbook. But I would ignore those "Service" Errors in eventlog which U can find on every Computer. In most cases they are not relevant for diagnosing bluescreens. Have a look on disk and gpu driver errors in eventlog. The Network errors are just that there where problems with connecting to wifi., I dont think this is relevant.
      My ComputerSystem Spec
  6.    10 Jun 2017 #6
    Join Date : Jun 2017
    Posts : 9
    windows 10
    Thread Starter

    Quote Originally Posted by BSODHunter View Post
    Nice finds zbook. But I would ignore those "Service" Errors in eventlog which U can find on every Computer. In most cases they are not relevant for diagnosing bluescreens. Have a look on disk and gpu driver errors in eventlog. The Network errors are just that there where problems with connecting to wifi., I dont think this is relevant.
    can i just diskpart clean my ssd that has windows 10 and then reinstall windows?
      My ComputerSystem Spec
  7.    13 Jun 2017 #7
    Join Date : Jan 2017
    Karlsruhe
    Posts : 729
    Windows 10 Pro
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
BSOD after installing drivers
Hello, I am having problems with BSOD. The error message is THREAD_STUCK_IN_DEVICE_DRIVER. It happened to me first while I was playing a game and then after that I couldnt boot Windows bcs of the same BSOD. I did a fresh new install of Windows 10...
BSOD Crashes and Debugging
Solved BSOD after Updating Drivers with MSI Live Update
Hello Community, hopefully you can Help me ;) I did a clean Windows 10 installation today, after installing all drivers from my mainboard cd, everything was fine. Then i updated the Drivers with the MSI-Live-Update-Tool and restarted the pc....
BSOD Crashes and Debugging
GTX 970 hardware or drivers causing BSOD?
Hello - here is my situation: Approx 1 week ago I upgraded from a GTX 770 (had absolutely NO issues, infact I cant remember the last time I saw a BSOD with this PC) Upgraded to a R9 390X card, and sold my 770. Within a day, I started to get...
BSOD Crashes and Debugging
VIDEO_MEMORY_MANAGEMENT_INTERNAL BSOD + AMD Drivers Problem
I am sorry that I cannot post my entire situation here because I am on my phone, but I have a thread on Microsoft forums that I made when I had access to my computer. Currently, I can't sign in to Winfoes without it giving me this BSOD after 15...
BSOD Crashes and Debugging
Solved BSOD when Graphics Drivers installed
My computer was frequently BSODing under Windows 7. I thought that my Windows install was bad, so I bought a new SSD hard drive and installed a fresh copy of Windows 10 on it. Everything worked well until my video driver auto installed itself...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:19.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums