Page 1 of 3 123 LastLast
  1.    07 Jun 2017 #1
    Join Date : Jun 2017
    Posts : 9
    win 10 pro 64

    win 10 pro 64 stop code 0x0000007b 0xffffffffc0000034


    win 10 pro 64
    SSD 500gb samsung 850 pro

    stop code : inaccessible boot device (probably 0x0000007b)
    0xffff----------1810 <--the middle numbers keep changing with each restart
    0xffffffffc0000034
    0x0000000000
    0x0000000000

    same result with safe mode

    I am quite sure it is a hard drive or partition driver issue that causes the windows to lose connection with the partiotion once loaded so I could not even get a minidump or log of the issue...
    windows starts loading drivers and logging but loses touch with the partition and crashes and can not save the crash log since it has no access to the partition.

    This came about after a bad install of acronis trueimage 2017 NG (upgrade from 2016)
    per acronis I have removed traces of acronis drivers from regedit (snapman.sys etc) but removing that did not help, probably there is a disconnect or missing driver now that snapman acronis driver is gone.

    anyway I need a way to log the boot or safemode boot to see at what point the system crashes.

    I have tried remaking the boot etc... that is not the issue
    DISM can not access the image of c:\windows log https://pastebin.com/sWKBRtw3
    Sfc offline does not work either
    chkdsk done and all is good
    hardware tests all are okay
    bios was untouched so that could not be the issue but in case I have tried to disable and enable virtual drive and also factory reset the bios it is not UEIF (it is older HP envy 17t 3200 that was shipped with windows 7 originaly)
      My ComputerSystem Spec
  2.    07 Jun 2017 #2
    Join Date : Jun 2017
    Posts : 9
    win 10 pro 64
    Thread Starter

    Attachment 138466Attachment 138467Attachment 138468Attachment 138469Attachment 138470Attachment 138471Attachment 138472

    System restore failed again makes sense since there is no access to the partition
    startup recovery ran 20 times with no fix
    do not have a back up to restore
    installed apps are important to me so I would like to do all possible to avoid reinstalling everything

    the blue screen code changes slightly after each restart as you can see in the images but some parts of it stau the same that are noted in the post above
      My ComputerSystem Spec
  3.    08 Jun 2017 #3
    Join Date : Jun 2015
    Posts : 12,858
    Windows 10 Pro

    What hard drive tests did you run?
      My ComputersSystem Spec
  4.    08 Jun 2017 #4
    Join Date : Jun 2017
    Posts : 9
    win 10 pro 64
    Thread Starter

    Quote Originally Posted by axe0 View Post
    What hard drive tests did you run?
    HP boot test
    smasung magician test for the SSD
    chkdsk
    etc
      My ComputerSystem Spec
  5.    09 Jun 2017 #5
    Join Date : Apr 2017
    Posts : 8,644
    windows 10 professional version 1607 build 14393.969 64 bit

    You may be able to fix your boot to get back to the desktop.
    Creating a bootable windows 10 iso can enable you to get back to windows 10.
    Download Windows 10
      My ComputerSystem Spec
  6.    09 Jun 2017 #6
    Join Date : Jun 2015
    Posts : 12,858
    Windows 10 Pro

    Sorry, but I need you to be specific in what hard drive tests you ran.
    Some don't check everything on the hard drive (is the hard drive failing in regards to speed, too many bad sectors or the overall health)

    The 0x7B has causes where a clean install won't fix the problem, since we are not aware of the health of your laptop we need specific information.
      My ComputersSystem Spec
  7.    09 Jun 2017 #7
    Join Date : Jun 2017
    Posts : 9
    win 10 pro 64
    Thread Starter

    as I said this is NOT a hardware issue.
    I made an image backup and installed a new windows on the SSD
    seams to be a permission issue with the old windows folder. it does not let dism or other windows repair to touch it even when online from another windows on the same SSD

    dism /image:c:\windows.old\windows \cleanup-image
    gives me the same error
    can not access the image

    at this point I need 1) a way to fix the permission on the windows.old from new windows
    or perhaps an easy way to transfer most my apps and settings and files from the old windows to the new one

    chrome, firefox sessions, open links, passwords. windows setting etc




    Quote Originally Posted by axe0 View Post
    Sorry, but I need you to be specific in what hard drive tests you ran.
    Some don't check everything on the hard drive (is the hard drive failing in regards to speed, too many bad sectors or the overall health)

    The 0x7B has causes where a clean install won't fix the problem, since we are not aware of the health of your laptop we need specific information.
      My ComputerSystem Spec
  8.    09 Jun 2017 #8
    Join Date : Jun 2015
    Posts : 12,858
    Windows 10 Pro

    Please allow me to explain the boot process with MBR.
    When you power on the system, the BIOS is initialized to execute the POST (Power On Self Test) to ensure the hardware works.
    Then the BIOS selects a boot device, reads the MBR of the device to the memory and handsover control to the MBR. The MBR scans for a partition that is marked as active which gives the signal that the partition is bootable. MBR reads the first sectors of the partition which contains executable code to which control is given to handle the rest.

    The most usual causes for this error are
    • Hard drive,
    • File system,
    • Boot sequence errors,
    • Device driver,
    • Virus infection (in particular check the MBR)


    If you don't think the file system and hard drive are the cause, then I'd suggest to make sure the boot order in the BIOS is proper so the hard drive is first in the list.
    You may be able to fix boot problems with MBR using Macrium Reflect preinstalled in the WinPE at Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums
      My ComputersSystem Spec
  9.    09 Jun 2017 #9
    Join Date : May 2017
    Posts : 10
    Windows 7 Home Basic

    The STOP 0x0000007B errors are caused by device driver problems, viruses, data corruption, and sometimes even hardware failures. You have tried update your drivers. If the problem still persist, try the steps:

    • Run chkdsk on your hard drive. ...
    • Perform an extensive test of your hard drive. ...
    • Run the fixmbr command to create a new master boot record. ...
    • Clear the CMOS. ...
    • Update your BIOS. ...
    • Update the hard drive controller's firmware if possible. ...
    • Repair your Windows installation. ...
    • Perform basic STOP error troubleshooting.
      My ComputerSystem Spec
  10.    09 Jun 2017 #10
    Join Date : Jun 2017
    Posts : 9
    win 10 pro 64
    Thread Starter

    thanks for your help guys but this not an oridinary problem

    it has to do with a permission that was assigned to my files by acronis

    After installing a new windows 10 , I brought over some files from the old system in program files etc
    the files I brought I can not delete easily , I have to use apps to override their permissions.
    looked at the properties> security and the administrator is under a name I have not seen and can not change..
      My ComputerSystem Spec

 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
Got blue screen and something about stop code
I got an offer from Avast to install "Avast Cleanup Premium" and "Avast Premier". Prior to that I had only "Avast Pro Antivirus". Then after the install I was promted to restart my computer, and this time I got a blue screeen: "Your PC ran into a...
BSOD Crashes and Debugging
Another day, another Stop Code
BSOD's everyday either in Chrome or Rise of the Tomb Raider. Not sure what part is causing the problem. Removing the 780 Ti GFX card still repro's the problem. Ran Windows 10 memory tester once, no problems. My build: cpu: i7-6700K gpu:...
BSOD Crashes and Debugging
BSOD has a different stop code whenever I do a task.
I recently bought a 1070 card 4 months ago and installed it. A few weeks later, prior to the new installation of the GPU, windows did an update and few hours prior to that update, I got a BSoD. Afterwords, I soon kept getting random BSoD from either...
BSOD Crashes and Debugging
Solved Stop Tracing Code
Today attempting to start Edge the screen would open half size then load Outlook then return to MSN. When I tried to widen the screen it recycled to Edge then close Edge. After 2-3 times I get a message that says " go to MSN for stop tracing code "...
Browsers and Email
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:29.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums