Windows 10: BSOD Windows 10 1703 When creating system image Solved

Page 4 of 7 FirstFirst ... 23456 ... LastLast
  1.    12 Jun 2017 #31

    Hi zbook

    (On the first day of the two days while running verifier)
    There where a couple but the wierd thing is when it bsod those two times i was watching a episode on vlc player and when the blue screen came up it ended the blue screen really quick it was that quick i couldn't even see the error code.
    This wasn't like the other times when it sits there for say 10 - 15 seconds collecting data and then reboots.

    (Second day)
    Watched about 6 episodes on vlc and it was perfectly fine.

      My ComputerSystem Spec

  2.    12 Jun 2017 #32

    Hi Axe0

    No sorry didn't know about that one just the stuff i mentioned to zbook in my last post.

    I just don't understand why they are so random and why it will not create a system image without bsod.
      My ComputerSystem Spec

  3. Posts : 20,094
    windows 10 professional version 1607 build 14393.969 64 bit
       12 Jun 2017 #33

    When using windows driver verifier please turn off automatic reboot so that you can view the stop code. Most often the stop code is driver verifier detected violation. More important though is that it may display the misbehaving driver with *.sys.
    Whenever you experience a bsod using windows driver verifier please record the misbehaving driver and post into the forum.

    See this link to uncheck automatic restart:
    BSOD Finding and fixing them - Microsoft Community

    The last bsod in the log was 6/4/2017.
    Please update your initial zip log or post a new log for the bsod while using windows driver verifier.
      My ComputerSystem Spec

  4. axe0's Avatar
    Posts : 13,631
    Windows 10 Pro
       12 Jun 2017 #34

    If driver verifier didn't catch a driver, no BSOD occured. It isn't useful to run driver verifier again since there have been multiple attempts to run driver verifier hoping it would crash the system.

    Based on the chkdsk logs, run follow tests on each partition / drive.

    BSOD Windows 10 1703 When creating system image Diagnostics Test BSOD Windows 10 1703 When creating system image

    Note   Note
    Run the tests on all hard drives/partitions!

    Note   Note
    Please run HDTune first, in the order posted!

    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run the long test.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Make a photo of the result and post it.

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Use option TWO with parameter /r
    Upload the chkdsk log Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Help Forums
      My ComputersSystem Spec

  5. Posts : 20,094
    windows 10 professional version 1607 build 14393.969 64 bit
       13 Jun 2017 #35

    The last bsod minidump was on 6/7. The last 3 dumps indicated memory. The memory has passed the memtest86+. It seems like there were only a small number of non-Microsoft drivers that were checked during runs of windows driver verifier. If you continue to have bsod and if the HD and chkdsk don't yield the malfunctioning hardware or misbehaving driver another run of windows driver verifier testing all non-Microsoft drivers may provide information. Please keep us informed about any new bsod as you are performing HD tune and chkdsk.
      My ComputerSystem Spec

  6.    14 Jun 2017 #36

    Hi guys sorry for the late reply these took a while plus i had 2 Bsod while on desktop updated logs below.

    Just done the the hard drives tests these are the results images below thanks again Axe0,Zbook.
    Attachment 139405 Attachment 139406 Attachment 139407

    Attachment 139408 Attachment 139409 Attachment 139410

    Attachment 139411 Attachment 139412 Attachment 139413

    Attachment 139414 Attachment 139415 Attachment 139416

    Attachment 139417 Attachment 139418 Attachment 139419

    Attachment 139420 Attachment 139476 Attachment 139421

    Last edited by Hally; 14 Jun 2017 at 12:19.
      My ComputerSystem Spec

  7. Posts : 20,094
    windows 10 professional version 1607 build 14393.969 64 bit
       14 Jun 2017 #37

    BugCheck 1000007E, {ffffffffc0000005, fffff802ab711c50, ffffda8179416678, ffffda8179415eb0}
    Probably caused by : memory_corruption
    BugCheck 1000007E, {ffffffffc0000005, fffff803250f8c50, ffffde80f103c678, ffffde80f103beb0}
    Probably caused by : memory_corruption
    BugCheck 1000007E, {ffffffffc0000005, fffff8037cc87c50, ffffc680a0b946b8, ffffc680a0b93ef0}
    Probably caused by : memory_corruption
    Was the memtest you had ran memtest or memtest86+?
    With 3/3 new bsod minidumps in 2 days that were memory lets make another test of the memory.
    Please use memtest86+

    Run memtest86+ version 5.01 for at least 8 runs. This may take hours so plan to run it overnight.
    Memtest86+ - Advanced Memory Diagnostic Tool

    On the 1500GB drive run chkdsk /x /f /r (this may take many hours, plan to run overnight)
      My ComputerSystem Spec

  8. axe0's Avatar
    Posts : 13,631
    Windows 10 Pro
       14 Jun 2017 #38

    What case do you have?
    The HDD temps may be a risk, it could result in physical damage.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

      My ComputersSystem Spec

  9.    14 Jun 2017 #39

    Hi guys

    Axe0 i have a cooler master cosmos 1 case i will fill the specs of my computer in later tonight or tomorrow i have to go out in a mo.

    Zbook i will run memtest86+ over night sry it was the other memtest i ran first didn't realise there where two.

    On the 1500GB drive run chkdsk /x /f /r
    I tried this in admin comand promt i put g where the x is but it says invalid parameter - /g
      My ComputerSystem Spec

  10. Posts : 20,094
    windows 10 professional version 1607 build 14393.969 64 bit
       14 Jun 2017 #40

    When you open file explorer you can view the drive letter assigned to each drive. For the chkdsk syntax if the problematic drive is g use this command in administrative command prompt: chkdsk G: /x /f /r
      My ComputerSystem Spec

Page 4 of 7 FirstFirst ... 23456 ... LastLast

Related Threads
Solved creating system image in windows10 in Backup and Restore
Hi all,I created a system image of all my drives from backup and restore in the control panel.I would like to know will that restore my computer completely or should I do something else.Am using version 1730 build 15063.332,thank-you.
I am looking to create a system image for Windows 10 (the drive the OS / programs are installed on only). I am reading this tutorial and was a bit confused on a few things: How to create an image backup in Windows 10 and restore it, if need be |...
I've been trying to create system image backups using the Windows backup utility. (A waste of time, perhaps, since I have Acronis TI 2015 that seems to work without any problem, but I consider this part of getting familiar with Windows 10.) The...
problem creating system image in Backup and Restore
i did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do .i have tried...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:33.
Find Us