Page 2 of 7 FirstFirst 1234 ... LastLast
  1.    07 Jun 2017 #11
    Join Date : Jun 2015
    Posts : 12,854
    Windows 10 Pro

    Please reset driver verifier, if not yet done, and check the following settings on all non-microsoft drivers.
    Code:
    Special Pool 
    Force IRQL checking
    Pool Tracking 
    Deadlock Detection
    Security Checks (new as of Windows 7)
    Miscellaneous Checks
    Power framework delay fuzzing (new as of Windows 8)
    DDI compliance checking (new as of Windows 8)
      My ComputersSystem Spec
  2.    07 Jun 2017 #12
    Join Date : Jun 2017
    Posts : 28
    Windows 10 64bit 1703
    Thread Starter

    Thanks axe0

    Just had a crash while steam was open and i was playing rockect league i wasn't runing verifier at this time as i just seen your post now.


    Will now run verifier with your settings over night and post tomorrow with logs.

    thanks again

    hally
      My ComputerSystem Spec
  3.    08 Jun 2017 #13
    Join Date : Jun 2017
    Posts : 28
    Windows 10 64bit 1703
    Thread Starter

    Hi Axe0


    Done what you said with them settings on verifier ran over night updated logs below.

    Thanks

    Hally
      My ComputerSystem Spec
  4.    08 Jun 2017 #14
    Join Date : Oct 2016
    Posts : 322
    seL4

    Hally,

    The lastest crash dump is from the 7th, but I see from the event log that on the 8th your computer rebooted without cleanly shutting down.

    From that crash dump, the nvidia driver was in the call stack and I noticed you are running an outdated display driver (382.05) the current release is 382.33 - it wouldn't hurt to update it.
      My ComputerSystem Spec
  5.    08 Jun 2017 #15
    Join Date : Jun 2015
    Posts : 12,854
    Windows 10 Pro

    Driver verifier has still not caused crashes.

    Please keep it running again.
      My ComputersSystem Spec
  6.    08 Jun 2017 #16
    Join Date : Apr 2017
    Posts : 8,584
    windows 10 professional version 1607 build 14393.969 64 bit

    There are 5 bsod minidump with the last one from 6/7/2017.

    Debugging:
    Code:
    BugCheck 1000007E, {ffffffffc0000005, fffff802c608dc50, ffffd300ea4376b8, ffffd300ea436ef0}Probably caused by : memory_corruption ( nt!MiCoalesceFreePages+3c0 )
    Code:
    The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&0.
    Code:
    The following boot-start or system-start driver(s) did not load: dam
    Code:
    The time provider 'VMICTimeProvider' has indicated that the current hardware and operating environment is not supported and has stopped. This behavior is expected for VMICTimeProvider on non-HyperV-guest environments. This may be the expected behavior for the current provider in the current operating environment as well.
    Code:
    The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&0.
    Code:
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x1000007e (0xffffffffc0000005, 0xfffff802c608dc50, 0xffffd300ea4376b8, 0xffffd300ea436ef0). A dump was saved in: C:\Windows\Minidump\060717-12406-01.dmp. Report Id: 54df9cee-f48e-4dee-bcfd-9a8fd08ad278.
    Code:
    The following boot-start or system-start driver(s) did not load: dam
    Code:
    WUDFPf (part of UMDF) did not load yet. After it does, Windows will start the device again.
    Code:
    The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&0.
    Code:
    The following boot-start or system-start driver(s) did not load: dam
    Code:
    The following boot-start or system-start driver(s) did not load: damEhStorClass
    Code:
    EhStorClass.sys Enhanced Storage Cla Windows Update
    Code:
    dam.sys DAM Kernel Driver Windows Update
    Code:
    WUDFRd.sys Windows Driver Foundation - User-mode Driver Framework Reflector Windows Update


    In the event log there were unexpected shut downs that out number the bsod. Have there been multiple hangs requiring power off? Which software applications are frequently hanging?

    If there are no bsod in the next 24 hours with the new windows driver verifier settings run memtest86+ version 5.01 so that there are at least 8 runs (run overnight): Memtest86+ - Advanced Memory Diagnostic Tool
      My ComputerSystem Spec
  7.    08 Jun 2017 #17
    Join Date : Jun 2015
    Posts : 12,854
    Windows 10 Pro

    Memtest86+ has already been run..
      My ComputersSystem Spec
  8.    08 Jun 2017 #18
    Join Date : Apr 2017
    Posts : 8,584
    windows 10 professional version 1607 build 14393.969 64 bit

    thx. So the remaining option is windows driver verifier settings to get more bsod
      My ComputerSystem Spec
  9.    09 Jun 2017 #19
    Join Date : Jun 2017
    Posts : 28
    Windows 10 64bit 1703
    Thread Starter

    Hi guy thanks for the replys.

    Zbook thanks for the input yeah i ran memtest the latest version for at least 12 hrs on 8 passes and there where no errors at all.

    Spectum i used display driver unistaller and put the 382.33 Nvidia driver on but later on it still Bsod while i was on desktop watching a series on vlc player after the bsod i watched a couple of more and it was fine its wierd that these bsod are so random.

    Axe0 i started verifier again last night its still runing now with them settings you provided earlier when i pick the none microsoft drivers from the list there seems to be only about picture below.

    Attachment 138667

    does that look about right on the drivers.

    Will let verifier run how long would you say to keep runing it Axe0.

    Thank you all

    Hally
      My ComputerSystem Spec
  10.    09 Jun 2017 #20
    Join Date : Jun 2015
    Posts : 12,854
    Windows 10 Pro

    According to the image, you only have 1 program, ASmedia sata controller driver, sound drivers, network driver, display driver and chipset driver running.
    This may be nothing, but I think we're missing some drivers like drivers for the USB ports?

    Anyway, let driver verifier run for 2 days.
      My ComputersSystem Spec

 
Page 2 of 7 FirstFirst 1234 ... LastLast


Similar Threads
Thread Forum
Solved creating system image in windows10
Hi all,I created a system image of all my drives from backup and restore in the control panel.I would like to know will that restore my computer completely or should I do something else.Am using version 1730 build 15063.332,thank-you.
Backup and Restore
Creating System / OS Image in Win 10 Pro
I am looking to create a system image for Windows 10 (the drive the OS / programs are installed on only). I am reading this tutorial and was a bit confused on a few things: How to create an image backup in Windows 10 and restore it, if need be |...
General Support
Solved Problems creating Windows system image backups
I've been trying to create system image backups using the Windows backup utility. (A waste of time, perhaps, since I have Acronis TI 2015 that seems to work without any problem, but I consider this part of getting familiar with Windows 10.) The...
Backup and Restore
problem creating system image
i did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do .i have tried...
Backup and Restore
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:32.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums