Code:
0x00000124: WHEA_UNCORRECTABLE_ERROR (8.06.2017 19:45:40) [Windows 10]
CAUSED BY: memory_corruption
hal.dll (Hardware Abstraction Layer DLL. NO Driver)
WHEA Notify: Machine Check Exception
Type: Micro-Architectural Error
Error: Unclassified (Proc 0 Bank 0)
PROCESS: Steam.exe
Code:
0x0000001E: KMODE_EXCEPTION_NOT_HANDLED (7.06.2017 19:34:44) [Windows 10]
CAUSED BY: memory_corruption
NTFS.sys [6.07.1994] * NT File System Driver (Windows System File)
PROCESS: ZenMate.exe
Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS
Code:
2017-05-03T00 11:46.050 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-03T00 11:49.484 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-03T00 11:57.503 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-03T00 12:00.947 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-03T00 12:09.158 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-03T00 12:12.602 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-25T05 32:51.016 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-05-25T05 32:57.885 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-06-01T16 24:21.089 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-06-01T16 24:26.093 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-06-02T00 27:09.544 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-06-02T00 27:14.747 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-06-08T14 53:17.821 Error: The device, \Device\Harddisk0\DR0, has a bad block.
2017-06-08T14 53:22.930 Error: The device, \Device\Harddisk0\DR0, has a bad block.
As u can see the bsod dumps show hardware errors with "memory_corruption". Disk errors in eventlog are present too (...has a bad block).
Please check your disk:
Run HDTune to check health and scan for errors.
Note
It may take some time, but look for signs of any errors or failure.
You can also run a disk check using
chkdsk. Refer to the tutorial for details of how to do this.