1.    04 Jun 2017 #1
    Join Date : May 2016
    Posts : 18
    win 10

    BSOD creating VPN


    This system is connected to a Netgear R7000 router and Xfinity TC8305 cable gateway handling my home network. I'm having a series of BSOD's in conjunction with my attempts to configure the OpenVPN capability on the router.

    I made the appropriate settings in the router admin page and installed the OpenVPN client on this system. Installation appeared normal until I attempted to connect to the VPN from outside the home network. The client messages indicate a normal connection, but no files or directories appear. The client is trying to use port 12974 on the router, and a port check tool indicates it is closed. The router will not accept a port forwarding request on 12974, saying it's in use by another, unidentified, service. So: VPN apparently installed but not functional.

    Now, in the course of trying to get the VPN to work, I've begun to get BSOD's that mention file ndis.sys. Various forums point to an old adapter driver as the culprit, but the driver is up to date. One more detail: After recovering from every BSOD, I get a Kaspersky box saying an application failed to load, and asking to forward a crash dump to them, but that forwarding always fails.

    Dump attached. TIA...
      My ComputerSystem Spec
  2.    04 Jun 2017 #2
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,340
    Windows 10 Pro X64 16299.19

    The latest dump indicates a problem with Kaspersky:
    Code:
    BugCheck D1, {2000, 2, 1, fffff80c296119d3}
    *** WARNING: Unable to verify timestamp for klwfp.sys
    *** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    Probably caused by : memory_corruption
    klwfp.sys is dated Mon Jun 13 05:29:14 2016.

    See if there is a newer version of Kaspersky available. If not, uninstall it and run with the built-in Windows Defender which is what I, and many others here, use.

    Also, it looks like you are overclocking the CPU from 2.3 to 2.4. Please remove all over clocking and/or over voltage, see if that makes a difference is Kaspersky doesn't resolve this.
      My ComputersSystem Spec
  3.    05 Jun 2017 #3
    Join Date : May 2016
    Posts : 18
    win 10
    Thread Starter

    Thanks, Rich. Interesting to note that klwfp.sys as seen in File Manager is five days later than the timestamp you give; perhaps that has something to do with the "Unable to verify timestamp" error.

    The overclocking item was a surprise: this is a bog-standard ASUS laptop, and any overclocking present must be the manufacturer's doing.

    I'll monitor for a while and see if I can get the BSoD to happen without any VPN activity; if that happens I'll try an antivirus change.

    rj
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
creating an image
guys, am lost. Havent imaged in a few years and need to start imaging this wednesday eight workgroup computers for a non-profit organization. I created a w10 reference pc in vmware workstation but there i am stuck. Seems syspre and dism dont work...
Installation and Upgrade
BSOD bad_system_config_info, Creating recovery drive
hi. I've got a bad_system_config_info BSOD. What I've tried: - booting in safe mode - system restore - drive corrupted message - reset this pc - error: there was a problem resetting your PC. No changes were made. I'm running a 'create...
BSOD Crashes and Debugging
Creating pop ups
I want to create a pop up that reminds me to do a certain thing when I open a specific program. It is something that I always forget how to do and I want it to disappear when I click OK or something like that. Is it possible to do that at all?...
Performance & Maintenance
Solved Bsod after creating partition 0xc0000225
I need to install Linux for school and therefore was partitioning my windows. I created a 60GB and 1GB swap ext3 partitions using easus partition master and now I am getting a blue screen with that code. Note; I haven't tried to install Linux yet....
BSOD Crashes and Debugging
BSOD, Win10 Not creating DMP files. Sonic Wall VPN Client culprit?
Hello, I need help with my Windows 10 PC not creating memory.dmp files upon BSOD. The attached debug files are likely referencing the last BSOD for which a minidump or memory.dmp was created. Since then I have had 2 more BSOD's, each time forgetting...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:03.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums