Page 2 of 2 FirstFirst 12
  1.    21 Jun 2017 #11
    Join Date : Jun 2017
    Posts : 11
    Windows 7
    Thread Starter

    i finally got round trying to fix the computer after having a couple of busy weeks. So i reformatted it and started up the windows installation through bootable USB and straight away (within 3 seconds) the exact same blue screen happened...

    This actually makes sense, as in the original post i said i tried booting from a working PC's hard drive and still got the same BSOD

    Does this mean this is 100% a hardware fault? If so, how come windows was working perfectly fine in safe mode?
      My ComputerSystem Spec
  2.    21 Jun 2017 #12
    Join Date : Apr 2017
    Posts : 8,681
    windows 10 professional version 1607 build 14393.969 64 bit

    Code:
    The following boot-start or system-start driver(s) failed to load: 
    cdrom
    Code:
    The following boot-start or system-start driver(s) failed to load: 
    AFD
    CSC
    DfsC
    discache
    MpFilter
    NetBIOS
    NetBT
    nsiproxy
    Psched
    rdbss
    SCDEmu
    spldr
    tdx
    vwififlt
    Wanarpv6
    WfpLwf
    Code:
    Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
      Feature: Behavior Monitoring
      Error Code: 0x80070006
      Error description: The handle is invalid. 
      Reason: The filter driver was unloaded unexpectedly.


    Code:
    Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
      Feature: Network Inspection System
      Error Code: 0x80070006
      Error description: The handle is invalid. 
      Reason: The filter driver was unloaded unexpectedly.
    Code:
    The following boot-start or system-start driver(s) failed to load: 
    AFD
    CSC
    DfsC
    discache
    MpFilter
    NetBIOS
    NetBT
    nsiproxy
    Psched
    rdbss
    SCDEmu
    spldr
    tdx
    vwififlt
    Wanarpv6
    WfpLwf
    [CODE][Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
    Feature: On Access
    Error Code: 0x8007043c
    Error description: This service cannot be started in Safe Mode
    Reason: Antimalware protection has stopped functioning for an unknown reason. In some instances, restarting the service may resolve the problem./CODE]

    [CODE][The following boot-start or system-start driver(s) failed to load:
    discache
    MpFilter
    SCDEmu
    spldr
    Wanarpv6/CODE]

    Code:
    The following boot-start or system-start driver(s) failed to load: 
    discache
    MpFilter
    SCDEmu
    spldr
    Wanarpv6
    Code:
    Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
      Feature: On Access
      Error Code: 0x8007043c
      Error description: This service cannot be started in Safe Mode 
      Reason: Antimalware protection has stopped functioning for an unknown reason. In some instances, restarting the service may resolve the problem.
    Code:
    There was error [DATABASE OPEN FAILED] processing the driver database
    Code:
    The following boot-start or system-start driver(s) failed to load: 
    discache
    MpFilter
    SCDEmu
    spldr
    Wanarpv6

    In the event log there were recurrent problems with drivers failing to load and windows defender.
      My ComputerSystem Spec
  3.    22 Jun 2017 #13
    Join Date : Nov 2015
    Posts : 2,863
    64bit Win 10 Pro ver 1709 Build 16299.64

    Quote Originally Posted by Vitrix View Post
    i finally got round trying to fix the computer after having a couple of busy weeks. So i reformatted it and started up the windows installation through bootable USB and straight away (within 3 seconds) the exact same blue screen happened...

    This actually makes sense, as in the original post i said i tried booting from a working PC's hard drive and still got the same BSOD

    Does this mean this is 100% a hardware fault? If so, how come windows was working perfectly fine in safe mode?
    I think it is really important to determine if the hardware is faulty because, as you say, safe mode should have failed if it was hardware related. You could have an intermittent problem (e.g. a faulty connection on the motherboard) which just makes it harder to track down.

    Can you just try and run in the BIOS menu for a couple of hours and see if this is stable, try working through all the pages and seeing if you get any signs of a failure.

    The windows 7 clean boot process is described here: https://www.sevenforums.com/tutorials/179159-troubleshoot-application-conflicts-performing-clean-startup.html
    Make sure you are following all the steps correctly and try another clean boot if you did not get any hardware failure in the BIOS or Safe mode.
      My ComputersSystem Spec
  4.    22 Jun 2017 #14
    Join Date : Jun 2017
    Posts : 11
    Windows 7
    Thread Starter

    Quote Originally Posted by philc43 View Post
    I think it is really important to determine if the hardware is faulty because, as you say, safe mode should have failed if it was hardware related. You could have an intermittent problem (e.g. a faulty connection on the motherboard) which just makes it harder to track down.

    Can you just try and run in the BIOS menu for a couple of hours and see if this is stable, try working through all the pages and seeing if you get any signs of a failure.

    The windows 7 clean boot process is described here: https://www.sevenforums.com/tutorials/179159-troubleshoot-application-conflicts-performing-clean-startup.html
    Make sure you are following all the steps correctly and try another clean boot if you did not get any hardware failure in the BIOS or Safe mode.
    I've completely wiped clean the hard drive so there is no windows to clean boot. I'm getting the BSOD whilst trying to do a fresh install of windows 10


    I'll try running the BIOS for couple of hours like you suggested and report back
      My ComputerSystem Spec
  5.    22 Jun 2017 #15
    Join Date : Jun 2017
    Posts : 11
    Windows 7
    Thread Starter

    The BIOS has crashed.

    Details of what happened:
    I let BIOS run for 1 hour and checked to see if it was working and it was fine. Came back roughly 2 hours after that (total 3 hours) and moved the mouse and clicked on the tabs on the 3D bios and it was working. But after 10 seconds of clicking around and switching tabs, it stopped working. I was able to move the mouse but clicking on the tabs or setting did nothing and 5 seconds late i lost control of the mouse. It started moving diagonally to the left of the screen and then went to the bottom left. As soon as i lost mouse control i checked the keyboard and that too did not work.
      My ComputerSystem Spec
  6.    22 Jun 2017 #16
    Join Date : Nov 2015
    Posts : 2,863
    64bit Win 10 Pro ver 1709 Build 16299.64

    OK, bad news for you but good news for troubleshooting. Doublecheck all the connections inside your case and remove and reinsert every plug and board. Clean out all fans and heatsinks and then recheck the PC to see if you can keep it running in the BIOS screen.
      My ComputersSystem Spec
  7.    22 Jun 2017 #17
    Join Date : Jun 2017
    Posts : 11
    Windows 7
    Thread Starter

    does that include CPU connection? or just power, sata and RAM(which iv'e checked multiple times) connections?
      My ComputerSystem Spec
  8.    22 Jun 2017 #18
    Join Date : Nov 2015
    Posts : 2,863
    64bit Win 10 Pro ver 1709 Build 16299.64

    CPU removal and reinsertion should be a last resort - you will need to clean and reapply the thermal paste if you do this. There have been rare cases where a CPU pin has been bent and not making proper connection.
      My ComputersSystem Spec
  9.    4 Weeks Ago #19
    Join Date : Jun 2017
    Posts : 11
    Windows 7
    Thread Starter

    I completely forgot about this post but the issue did end up being the CPU.

    After reconnecting everything i was still getting the bsod so i decided to buy another motherboard thinking that could be the problem; but the bsod still happened. So then i ordered another CPU and voila it worked.

    From what i could tell there was no bent pins but it somehow became faulty.
    Unfortunately the manufactures guarantee ended by the time i found out it was the CPU.
      My ComputerSystem Spec
  10.    4 Weeks Ago #20
    Join Date : Apr 2017
    Posts : 8,681
    windows 10 professional version 1607 build 14393.969 64 bit

    Glad you got it fixed. If you post a new zip we can look it over.
      My ComputerSystem Spec

 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
Solved SSD Boot bsod ntfs.sys page_fault_in_nonpaged_area
Yesterday I got home and I found out that my computer had been bsod-ing all day so I quickly went searching for solutions to my problems but to no avail. I have nailed it down to this SSD(boot drive) I have where in any windows installation would...
BSOD Crashes and Debugging
Various BSOD on Startup, Error: PAGE_FAULT_IN_NONPAGED_AREA
Hi, I've had a series of problems starting my HP laptop (dv6t-7000) as it gives me a BSOD on startup. I do have Bitlocker setup (due to corporate requirements). I've gotten two main errors, both PAGE_FAULT_IN_NONPAGED_AREA, followed by either...
BSOD Crashes and Debugging
BSOD Windows 10 error page_fault_in_nonpaged_area
Hi, I'm completly new to the forum and hoping someone can help out. Brand new dell xps13 that I've upgraded from 8.1 to 10 and have been getting random BSOD, no patter that I can see, not running anything in particular. debugs attached,...
BSOD Crashes and Debugging
Solved BSOD upgrading to Win10, error PAGE_FAULT_IN_NONPAGED_AREA
I tried to upgrade my laptop to Windows 10 Pro 32bit using the USB installation media (from the media creation tool). However during the first reboot, I encountered a Windows 10 BSOD with the message: PAGE_FAULT_IN_NONPAGED_AREA and was then...
BSOD Crashes and Debugging
BSOD page_fault_in_nonpaged_area
Got a HP 8200 Elite SFF that I've installed Windows 10 on... it's been a bumpy ride trying to clear up driver related issues but now I'm stuck... I've had a few different BSOD over the last 2 days and I'm convinced it's some driver... maybe the usb...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:25.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums