New
#1
BSOD when trying to install fresh windows 10
BSOD when trying to install fresh windows 10
irql_not_less_or_equal
BSOD when trying to install fresh windows 10
irql_not_less_or_equal
Hey there!
I dont have windows 10 installed on hard drive. When i try to install windows 10 i get BSOD irql_not_less_or_equal
What should I do? Any suggestions?
What hardware do you work with?
At what stage does the crash occur? What does the screen show before the BSOD occurs?
Hardware
Cpu - AMD Athlon 64 X2 5000+
Ram - 3GB Single-Channel DDR2 @ 325MHz
Motherboard - ASUSTek Computer INC. NODUS3
Graphics - 1024MB ATI Radeon HD 4800 Series
Storage - 465GB Wester Digital WDC WD50 00AAKX-001CA SCSI Disk Device (SATA)
Audio - AMD High Definition Audio Device
The crash occur right when im here Attachment 136666
Some more questions:
How old is the hardware?
Is anything overclocked?
What cooler and PSU do you have?
Where did you get the installation media?
Could you check if the BIOS is up to date please. To do this, go into the BIOS and note the version, then check at ASUS what the latest BIOS version is and if it matches the installed version.
I have no idea how old it the hardware and i had windows 10 on it before no errors nothing
nothing is overclocked
it has stock cooler and psu delta electronics inc dps 460db a
installation media is from office microsoft site
BIOS are up to date
When was the last time the hardware was cleaned of dust?
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Cleaned hardware a month ago
will run the memtest right now and leave it overnight. When its done will post photo here