1.    23 May 2017 #1
    Join Date : May 2017
    Posts : 4
    Windows 10

    Frequent BSOD When Waking From Sleep


    So this one's been puzzling me for a while. I'm getting very frequent BSOD, and it most commonly occurs when waking the computer up from sleep in the morning. The error code is frequently different, and sometimes I don't get a crash but just get weird behavior. Like chrome can't open any webpages, or I can't switch songs on spotify while alt-tabbed and windows fails to create that little sound dialog in the top left of the screen with current song and volume.

    I've also had the computer straight up crash with no BSOD (unless it just restarted before the screen turned on?) and had the computer cycle through a bunch of solid color screens and a few gradients on wakeup and then turn off.

    It's been happening for a while now, but I don't believe it started happening around the time I upgraded my RAM/Graphics card... but I could be misremembering.

    I ran MemTest, and got 1 error on the third (of four) pass of test 7, but it never reoccured - so I'm not sure what that means.

    I am not able to run driver verifier - I get stuck in a blue screen loop on boot with it. The following occured when I tried to run it:

    • System Thread Exception
    • Page Fault
    • Driver Verifier IOManager Violation


    All in all, I'm thinking it's a memory issue but hoping its a driver issue since I don't want to have to deal with RMAing my RAM and it's probably past date anyways.

    Also, the DM Log tool always saves to the C drive even though my desktop is on another HDD - thought I wasn't getting the zips at first. But, attached!

    System Info:
    • Windows 10
    • i5 4670k
    • 16 GB DDR3 RAM Corsair
    • GTX 1070
    • Z87X-UD3H-CF Mobo
      My ComputerSystem Spec
  2.    23 May 2017 #2
    Join Date : Oct 2013
    South Australia
    Posts : 674
    macSierra

    Quote Originally Posted by MissingNo View Post
    I ran MemTest, and got 1 error on the third (of four) pass of test 7, but it never reoccured - so I'm not sure what that means.
    Was this using MemTest86+......note the +

    If so, then it is significant. You need to test the individual RAM modules to determine if its that, or the RAM module slots on the motherboard.

    Follow the steps as laid out here:
    MemTest86+ - Test RAM Windows 10 BSOD Tutorials
      My ComputersSystem Spec
  3.    23 May 2017 #3
    Join Date : May 2017
    Posts : 4
    Windows 10
    Thread Starter

    Was just MemTest86 - will run + now! Back with results in a bit
      My ComputerSystem Spec
  4.    23 May 2017 #4
    Join Date : Oct 2013
    South Australia
    Posts : 674
    macSierra

    Quote Originally Posted by MissingNo View Post
    Was just MemTest86 - will run + now! Back with results in a bit
    Follow the instructions in the tutorial....it will be several hours before you will have a result.
      My ComputersSystem Spec
  5.    23 May 2017 #5
    Join Date : Apr 2017
    Posts : 8,806
    windows 10 professional version 1607 build 14393.969 64 bit

    In the past few days I installed the debugger and when I processed the zip files there were 11 in the month of May.

    When you see these in the results how do you find the application related to the *.sys driver?
    How do you know which ones are good versus bad or important versus unimportant results?

    Probably caused by : dxgmms2.sys ( dxgmms2! ?? ::FNODOBFM::`string'+29c2 )
    Probably caused by : ntkrnlmp.exe ( nt!RtlEqualUnicodeString+4 )
    Probably caused by : WdFilter.sys ( WdFilter!MpCreateSection+138 )
    Probably caused by : NETIO.SYS ( NETIO!IndexListClassify+97 )
    Probably caused by : Pool_Corruption ( nt!ExFreePool+bc4 )
    Probably caused by : ntkrnlmp.exe ( nt!PspCatchCriticalBreak+d6 )
    Probably caused by : NTFS.sys ( NTFS!NtfsUpdateLcbDuplicateInfo+5e )
    Probably caused by : WdFilter.sys ( WdFilter!MpPreCleanup+ed )
    Unable to load image ScpVBus.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ScpVBus.sys
    *** ERROR: Module load completed but symbols could not be loaded for ScpVBus.sys
    Probably caused by : ScpVBus.sys ( ScpVBus+b174 )
    Probably caused by : memory_corruption
    Probably caused by : memory_corruption ( ONE_BIT )
      My ComputerSystem Spec
  6.    23 May 2017 #6
    Join Date : Jun 2015
    Posts : 12,865
    Windows 10 Pro

    Use Driver Reference Table (DRT)

    Windows drivers are never bad, rather falsely reported as the cause.
      My ComputersSystem Spec
  7.    24 May 2017 #7
    Join Date : May 2017
    Posts : 4
    Windows 10
    Thread Starter

    Ran 10 passes of MemTest86+, no errors!
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Frequent crashes (always waking from sleep but other times as well)
Hello, I just built a new system (or really moved an old system to a new motherboard) involving a Foxconn Quantumian1 x79 motherboard and a 3930k processor. My PSU is a corsair RM850. On the old system (HP motherboard), I was not having any...
Performance & Maintenance
Solved BSOD upon waking from sleep
133661 A new laptop with Windows 10 freezing when waking from sleep. BSOD: irql not less or equal. Please help.. Thank you very much!
BSOD Crashes and Debugging
Solved Frequent BSOD starting/waking computer
Hello, A few months ago my PC started having random BSOD issues when starting and waking from sleep mode but it was only about 1 every few weeks. The issue became more and more frequent however until a couple of weeks ago when it started having...
BSOD Crashes and Debugging
Solved BSOD When Waking from Sleep
Just built a new computer. All of the drives and the Windows installation is the same as in the old system. I don't know if the issue would have occurred in the old system as I never tried to put my computer to sleep. I was getting one BSOD when...
BSOD Crashes and Debugging
Solved BSOD after waking from sleep
Hey guys, i am stumped on this one, every time i have put my computer to sleep after waking it it will show my pin to type in but it freezes there and the bsod after about 5secs, i have done a memtest and that passed, but yeah no idea. hopefully...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:46.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums