Page 1 of 2 12 LastLast
  1.    22 May 2017 #1
    Join Date : May 2017
    Posts : 10
    Win10 pro 64bit

    Daily Random BSOD Kernel Security Check Error Win10


    Hi

    Without fail I will have a daily BSOD with the above code.

    I have had memory BSOD's over the last week too but after running Prime95 for 6 hrs and Memtest for 23hrs with no issues I'm hopefully assuming no hardware faults.

    Since having these issues I have also replaced the GPU after completely removing the NVidia drivers. And I have replaced my 120Gb SSD with a 500Gb Samsung Evo.

    I didn't do a clean install but cloned via the samsung Migration software.

    I have been having random daily BSOD's since before the hardware changes

    Any help would be greatly appreciated.

    Thanks
    Matt
      My ComputerSystem Spec
  2.    22 May 2017 #2
    Join Date : Oct 2013
    South Australia
    Posts : 674
    macSierra

    Code:
    Event[14969]:
      Log Name: System
      Source: disk
      Date: 2017-05-20T12:24:43.223
      Event ID: 51
      Task: N/A
      Level: Warning
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Matt-PC
      Description: 
    An error was detected on device \Device\Harddisk2\DR2 during a paging operation.
    
    Event[14970]:
      Log Name: System
      Source: disk
      Date: 2017-05-20T12:24:43.223
      Event ID: 51
      Task: N/A
      Level: Warning
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Matt-PC
      Description: 
    An error was detected on device \Device\Harddisk2\DR2 during a paging operation.
    
    Event[14971]:
      Log Name: System
      Source: storahci
      Date: 2017-05-20T12:25:13.239
      Event ID: 129
      Task: N/A
      Level: Warning
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Matt-PC
      Description: 
    Reset to device, \Device\RaidPort0, was issued.
    
    Event[14972]:
      Log Name: System
      Source: disk
      Date: 2017-05-20T12:25:13.239
      Event ID: 153
      Task: N/A
      Level: Warning
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Matt-PC
      Description: 
    The IO operation at logical block address 0x3a3857e8 for Disk 2 (PDO name: \Device\0000002f) was retried.
    Code:
    Description	Disk drive
    Manufacturer	(Standard disk drives)
    Model	Samsung SSD 850 EVO 500GB ATA Device
    Bytes/Sector	512
    Media Loaded	Yes
    Media Type	Fixed hard disk
    Partitions	1
    SCSI Bus	0
    SCSI Logical Unit	0
    SCSI Port	2
    SCSI Target ID	0
    Sectors/Track	63
    Size	465.76 GB (500,105,249,280 bytes)
    Total Cylinders	60,801
    Total Sectors	976,768,065
    Total Tracks	15,504,255
    Tracks/Cylinder	255
    Partition	Disk #2, Partition #0
    Partition Size	465.76 GB (500,105,732,096 bytes)
    Partition Starting Offset	1,048,576 bytes

    I'd check Disk #2 carefully...use the Samsung diagnostic software for that. Backup any data off it first.

    Code:
    ffffd000`23c987b0  ffffe000`58d86290
    ffffd000`23c987b8  fffff801`d5f248ec*** WARNING: Unable to verify timestamp for klwtp.sys
    *** ERROR: Module load completed but symbols could not be loaded for klwtp.sys
     klwtp+0x48ec
    The .dmp points to a Kaspersky driver. However, I also see lots of TCPIP and NETIO references.....I suspect your ethernet/wifi drivers are at fault......check to see that the drivers are up to date.
      My ComputersSystem Spec
  3.    22 May 2017 #3
    Join Date : May 2017
    Posts : 10
    Win10 pro 64bit
    Thread Starter

    Thanks Golden

    I have downloaded and installed the realtek drivers. (windows said it was up to date but Ive installed from realtek)

    I can't find a way to diskcheck the SSD within samsungs magician software.
    I've ran all the performance and benchmark tests and they all look fine.

    Currently running error check from within windows

    No Errors found within diskmanagment

    I have spotted that AHCI isn't enabled. But that may have been due to the bios update I did last night.

    I will re-enable and test again

    I will report back after the next BSOD

    Thanks
      My ComputerSystem Spec
  4.    23 May 2017 #4
    Join Date : May 2017
    Posts : 10
    Win10 pro 64bit
    Thread Starter

    Latest BSOD: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY

    File attached

    Many Thanks
      My ComputerSystem Spec
  5.    23 May 2017 #5
    Join Date : Oct 2013
    South Australia
    Posts : 674
    macSierra

    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck FC, {ffffd00130bbdcc0, 8000000101632963, ffffd00130bbdaa0, 2}
    
    *** WARNING: Unable to verify timestamp for netr28x.sys
    *** ERROR: Module load completed but symbols could not be loaded for netr28x.sys
    Probably caused by : netr28x.sys ( netr28x+99e55 )
    
    Followup:     MachineOwner
    ---------
    
    6: kd> lmvm netr28x
    Browse full module list
    start             end                 module name
    fffff800`0d240000 fffff800`0d4b4000   netr28x  T (no symbols)           
        Loaded symbol image file: netr28x.sys
        Image path: netr28x.sys
        Image name: netr28x.sys
        Browse all global symbols  functions  data
        Timestamp:        Fri May 29 20:56:59 2015 (55684D03)
        CheckSum:         0027D7B1
        ImageSize:        00274000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    6: kd> !analyze -v
    Code:
    Name	[00000002] Linksys WMP600N Wireless-N PCI Adapter with Dual-Band
    Adapter Type	Ethernet 802.3
    Product Type	Linksys WMP600N Wireless-N PCI Adapter with Dual-Band
    Installed	Yes
    The very latest .dmp file blames the wireless adapter.....check with Linksys for an updated driver and install that.

    Disk#2 in the eventlog is still being flagged as an issue. Lets leave that for now as at this stage, I don't think its actually contributing to the issue - we will try and solve that once we get the BSOD under control.
      My ComputersSystem Spec
  6.    23 May 2017 #6
    Join Date : May 2017
    Posts : 10
    Win10 pro 64bit
    Thread Starter

    Quote Originally Posted by Golden View Post
    The very latest .dmp file blames the wireless adapter.....check with Linksys for an updated driver and install that.

    Disk#2 in the eventlog is still being flagged as an issue. Lets leave that for now as at this stage, I don't think its actually contributing to the issue - we will try and solve that once we get the BSOD under control.
    Thanks Golden.

    I no longer use the wifi adapter. Can I just disable it or do I really need to physically remove it.
      My ComputerSystem Spec
  7.    23 May 2017 #7
    Join Date : Oct 2013
    South Australia
    Posts : 674
    macSierra

    Although it's not being used, there seems to have been some interaction between it and Windows.....note the reset date in red below.

    Yes - try and disable it first and lets see if that works.

    Code:
    Name	[00000002] Linksys WMP600N Wireless-N PCI Adapter with Dual-Band
    Adapter Type	Ethernet 802.3
    Product Type	Linksys WMP600N Wireless-N PCI Adapter with Dual-Band
    Installed	Yes
    PNP Device ID	PCI\VEN_1814&DEV_0601&SUBSYS_00671737&REV_00\4&278CCF74&0&08F0
    Last Reset	23-May-17 11:03
    Index	2
    Service Name	netr28x
    IP Address	Not Available
    IP Subnet	Not Available
    Default IP Gateway	Not Available
    DHCP Enabled	Yes
    DHCP Server	Not Available
    DHCP Lease Expires	Not Available
    DHCP Lease Obtained	Not Available
    MAC Address	‪68:7F:74:7F:AB:65‬
    Memory Address	0xFBBE0000-0xFBBEFFFF
    IRQ Channel	IRQ 17
    Driver	c:\windows\system32\drivers\netr28x.sys (5.0.57.0, 2.44 MB (2,554,528 bytes), 12-Jun-15 04:59)
      My ComputersSystem Spec
  8.    23 May 2017 #8
    Join Date : May 2017
    Posts : 10
    Win10 pro 64bit
    Thread Starter

    Ok Thanks

    I've disabled it. If I get another BSOD Whilst the pc is turned off i'll remove it and report back

    Thanks
      My ComputerSystem Spec
  9.    23 May 2017 #9
    Join Date : Oct 2013
    South Australia
    Posts : 674
    macSierra

      My ComputersSystem Spec
  10.    25 May 2017 #10
    Join Date : May 2017
    Posts : 10
    Win10 pro 64bit
    Thread Starter

    Quote Originally Posted by Golden View Post

    AArgh, So close

    Managed nearly 49 hours. BSOD IRQ NOT EQUAL ETC.

    Report attached.
    I did see something in the event log about C: Drive again.

    The BSOD may not have reported as it had been stuck at 0% for a while. and Ive jsut noticed the size of the new file is tiny compared to the other
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
BSOD on new build - Kernel Security Check, Whea Uncorrectable Error
Hello! Would appreciate any help with this one. working on a new build and fresh install of Windows 10. I've installed all Windows updates and drivers for the hardware. However, I'm experiencing frequent BSODs while idle or surfing online. The...
BSOD Crashes and Debugging
BSOD Kernel security check failure + 'random' crashes
56195 Prologue: I run amd processor + amd graphic card, so I've catalyst control and since some days got the latest big win 10 update and amd radeon software -the first amd radeon came as update of catalyst control, but it missed the setting to...
BSOD Crashes and Debugging
Win10 BSOD Kernel Security Check Failure caused by ntoskrnl.exe
Hi everyone, I have just reinstalled Windows 10 yesterday. BSOD with Kernel Security Check Failure showed up when I open the video editing software, game works great instead. It never crashed before I reinstalled the OS. I have reinstalled...
BSOD Crashes and Debugging
Solved BSOD (Kernel Security Check Failure) on Win10
Hi, I got multiple times BSOD with info Kernel Security Check Failure. I work on laptop with additional usb mouse, usb keyboard, usb cooling pad and second display. I noticed that if I have connected my second display than Windows fall in random...
BSOD Crashes and Debugging
BSOD - Kernel Check Security Error (ntoskrnl.exe & null.sys?)
Hello everyone, I recently upgraded to Windows 10 and have been receving BSODs fairly frequently. After using BlueScreenView it seems that ntoskrnl.exe and null.sys are the common culprits. Seems like Googling around is not working so a catered...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 18:04.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums