Page 1 of 6 123 ... LastLast
  1.    16 May 2017 #1
    Join Date : Aug 2016
    Posts : 47
    Microsoft Windows 10 Education 64-bit 14393 Multiprocessor Free

    FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST


    I've been having periodic BSOD with a computer I built for a while now, but I thought I was in clear when I didn't get one about a month. However, a day or two ago I got one with a FAULTY_HARDWARE_CORRUPTED_PAGE, so I ran memtest over night and didn't get any errors this morning after 6 passes (picture attached). I also ran memtest about a month ago over the weekend for 29 passes without error. Hopefully this is a driver issue, but the problem has been going on for so long I may just buy new ram and see if it helps.
    Attached Thumbnails Attached Thumbnails Memtest4_03.jpg   Memtest5_15.jpg  
    FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST Attached Files
      My ComputerSystem Spec
  2.    17 May 2017 #2
    Join Date : Nov 2015
    Posts : 2,871
    64bit Win 10 Pro ver 1709 Build 16299.64

    The RAM would seem to be OK. Try some of the other hardware tests:



    FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST Diagnostics Test FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST
     HDD TEST

    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.





    FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST Diagnostic test FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST
     GPU TEST

    Run Furmark to test your GPU. Furmark tutorial

    Note   Note
    Run Furmark for around 30 minutes


    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high


     CPU TEST

    Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
      My ComputersSystem Spec
  3.    19 May 2017 #3
    Join Date : Aug 2016
    Posts : 47
    Microsoft Windows 10 Education 64-bit 14393 Multiprocessor Free
    Thread Starter

    Thanks for replying, I ran the tests and didn't seem to get any errors

    Ran the GPU for an hour with no flags and ran prime95 over night. I've attached the results.

    Thanks
    Attached Thumbnails Attached Thumbnails prime.PNG   hdd_bench.PNG   hdd_error.PNG   hdd_health.PNG   ssd_bench.PNG  

    ssd_error.PNG   ssd_health.PNG  
      My ComputerSystem Spec
  4.    22 May 2017 #4
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    MemCompression and memory_corruption going in hand with NTFS.sys all over the place are present in your dumps. I say there something wrong with SSD, Sata Cable, Sata Port or Windows filesystem.

    Maybe theres a newer firmware for your SSD. You should also check Windows filesystem:
    Repair Windows Filesystem:

    1. Open an elevated command prompt.
    2. In the elevated command prompt, type these commands below, and press Enter:

    dism /Online /NoRestart /Cleanup-Image /CheckHealth
    dism /Online /NoRestart /Cleanup-Image /ScanHealth
    dism /Online /NoRestart /Cleanup-Image /RestoreHealth

    sfc /scannow

    chkdsk %systemdrive% /F /R /X
    fsutil dirty set %systemdrive%

    SFC:
    The SFC command scans the integrity of all protected system files and replaces incorrect versions with correct Microsoft versions.
    DISM:
    If a Windows image becomes unserviceable, you can use the Deployment Imaging and Servicing Management (DISM) tool to update the files and correct the problem.
    For example, you would use DISM to fix Windows component store corruption when a sfc /scannow command is unable to repair corrupted or modified system files because the component store (source) is corrupted. SFC should be able to repair the files afterwards.
    CHKDSK:
    Checking your drives for errors every once in a while can help fix some performance issues. Drive errors can usually be caused by bad sectors, improper shutdowns, bad software, corruption, physical damage, etc...
      My ComputerSystem Spec
  5.    22 May 2017 #5
    Join Date : Aug 2016
    Posts : 47
    Microsoft Windows 10 Education 64-bit 14393 Multiprocessor Free
    Thread Starter

    Hello, thank you for replying.

    I ran the commands

    dism /Online /NoRestart /Cleanup-Image /CheckHealth
    dism /Online /NoRestart /Cleanup-Image /ScanHealth
    dism /Online /NoRestart /Cleanup-Image /RestoreHealth

    but get the following message

    The source files could not be found.Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.

    So I looked around online and tried to use the sources on a windows 10 iso I just downloaded today. I mounted the iso to my F drive and run

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:\sources\install.esd:1

    but get the same source error

    The source files could not be found.Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.

    Any idea on how to fix this?
      My ComputerSystem Spec
  6.    23 May 2017 #6
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Tip
    Update: The cumulative update KB4016871 fixes spurious DISM issues in Windows 10.

    See: KB4016871 Fixes Spurious Win10 DISM Issue - Windows Enterprise Desktop
      My ComputerSystem Spec
  7.    26 May 2017 #7
    Join Date : Aug 2016
    Posts : 47
    Microsoft Windows 10 Education 64-bit 14393 Multiprocessor Free
    Thread Starter

    Sorry for the update delay. I tried to do a diskcheck, but the computer would blue screen every time it started the process. I couldn't figure out how to stop the computer from going into the disk check on boot, even when I de-scheduled it with the cmd prompt in the startup troubleshooter. I ended up just reinstalling windows on my SSD and haven't had any BSOD in the meantime, but I am pretty sure Ive tried reinstalling windows in the past, only for the issue to eventually start up again. Anyway, I will let you know if the computer starts BSOD again and thanks for your help in the meantime.
      My ComputerSystem Spec
  8.    31 May 2017 #8
    Join Date : Aug 2016
    Posts : 47
    Microsoft Windows 10 Education 64-bit 14393 Multiprocessor Free
    Thread Starter

    Computer started BSODing again even after the fresh install. Uploaded the dumps
    FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST Attached Files
      My ComputerSystem Spec
  9.    01 Jun 2017 #9
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Code:
    0x0000003B:    SYSTEM_SERVICE_EXCEPTION (31.05.2017 19:29:15) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
                   NTFS.sys [6.07.1994] * NT File System Driver (Windows System File) 
     
    PROCESS:       MsMpEng.exe 
    
    ffffa101`f0f10060  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f10120  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f104c8  fffff803`c073f510 NTFS!NtfsMultipleAsync+0xe0
    ffffa101`f0f107d0  fffff803`c07f1382 NTFS!NtfsFlushVolume+0x17a2
    ffffa101`f0f107d8  fffff803`c0730000 NTFS!LfsSetDefragLsn <PERF> (NTFS+0x0)
    ffffa101`f0f107e0  fffff803`c07ba218 NTFS!g_RpcBindingHandleBound <PERF> (NTFS+0x8a218)
    ffffa101`f0f107e8  fffff803`c0730000 NTFS!LfsSetDefragLsn <PERF> (NTFS+0x0)
    ffffa101`f0f107f0  fffff803`c07b6ce4 NTFS!g_RpcBindingHandleBound <PERF> (NTFS+0x86ce4)
    ffffa101`f0f107f8  fffff803`c0730000 NTFS!LfsSetDefragLsn <PERF> (NTFS+0x0)
    ffffa101`f0f10800  fffff803`c07b6798 NTFS!g_RpcBindingHandleBound <PERF> (NTFS+0x86798)
    ffffa101`f0f10808  fffff803`c0730000 NTFS!LfsSetDefragLsn <PERF> (NTFS+0x0)
    ffffa101`f0f10810  fffff803`c07b678c NTFS!g_RpcBindingHandleBound <PERF> (NTFS+0x8678c)
    ffffa101`f0f10868  fffff803`c0747d8a NTFS!NtfsCommonWrite+0x354a
    ffffa101`f0f10870  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f10878  fffff803`c07f0c45 NTFS!NtfsFlushVolume+0x1065
    ffffa101`f0f10880  fffff803`c07f0c36 NTFS!NtfsFlushVolume+0x1056
    ffffa101`f0f10898  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f10a18  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f10dc8  fffff803`c07ec8e8 NTFS!NtfsCheckAttributeRecord+0x498
    ffffa101`f0f10e48  fffff803`c07ec3f1 NTFS!NtfsCheckFileRecord+0x161
    ffffa101`f0f10ed8  fffff803`c07ec273 NTFS!NtfsReadMftRecord+0x3c3
    ffffa101`f0f110f8  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f112a8  fffff803`c0739818 NTFS!NtfsAcquireExclusiveFcb+0x78
    ffffa101`f0f112d8  fffff803`c073af0b NTFS!NtfsReleaseFcb+0x4b
    ffffa101`f0f112f8  fffff803`c07f0c35 NTFS!NtfsFlushVolume+0x1055
    ffffa101`f0f11458  fffff803`c083b8f4 NTFS!NtfsAcquireExclusiveVcb+0x30
    ffffa101`f0f11498  fffff803`c074a70c NTFS!NtfsVolumeDasdIo+0x208
    ffffa101`f0f11558  fffff803`c073deba NTFS!NtfsCommonRead+0x23aa
    ffffa101`f0f11748  fffff803`c073b93e NTFS!NtfsFsdRead+0x1ee
    ffff8981`9cf8c4a8  fffff808`56533c08 NTFS!NtfsCreateFcb+0x9e8
    ffff8981`9cf8c4f8  fffff808`5652d6ef NTFS!NtfsBuildRelativeName+0x1af
    ffff8981`9cf8c578  fffff808`56479818 NTFS!NtfsAcquireExclusiveFcb+0x78
    ffff8981`9cf8c5a8  fffff808`5647af0b NTFS!NtfsReleaseFcb+0x4b
    ffff8981`9cf8c5e8  fffff808`5652d50f NTFS!NtfsWalkUpTree+0xb5f
    ffff8981`9cf8c8a8  fffff808`5647a103 NTFS!NtfsCleanupIrpContext+0x173
    ffff8981`9cf8c978  fffff808`5653ca34 NTFS!NtfsCommonQueryInformation+0xd84
    ffff8981`9cf8cc18  fffff808`56489b5d NTFS!DirtyPageRoutine+0x8d
    ffff8981`9cf8cd58  fffff808`5654285b NTFS!NtfsCheckpointVolume+0xc47
    ffff8981`9cf8cd68  fffff808`56489ad0 NTFS!DirtyPageRoutine
    ffff8981`9cf8ce78  fffff808`5652bde4 NTFS!NtfsReadFileRecord+0xe4
    ffff8981`9cf8cfe8  fffff808`565414dc NTFS!NtfsCleanupAttributeContext+0x18
    ffff8981`9cf8d118  fffff808`56548e5a NTFS!NtfsAddRecentlyDeallocated+0xa6
    ffff8981`9cf8d228  fffff808`5652133c NTFS!NtfsAcquireSharedVcb+0x34
    ffff8981`9cf8d268  fffff808`5650b8e4 NTFS!NtfsDefragFileInternal+0x690
    ffff8981`9cf8d518  fffff808`5650b1e5 NTFS!NtfsDefragFile+0x1dd
    ffff8981`9cf8d5b8  fffff808`565238a8 NTFS!NtfsUserFsRequest+0x2d4
    ffff8981`9cf8d5f8  fffff808`5647adef NTFS!NtfsInitializeTopLevelIrp+0x3f
    ffff8981`9cf8d638  fffff808`56523546 NTFS!NtfsFsdFileSystemControl+0x356
    ffff8981`9cf8da18  fffff802`8ff39ab6 nt!NtFsControlFile+0x56

    Again theres a problem with filesystem or disk.
      My ComputerSystem Spec
  10.    13 Jun 2017 #10
    Join Date : Aug 2016
    Posts : 47
    Microsoft Windows 10 Education 64-bit 14393 Multiprocessor Free
    Thread Starter

    Ran the chkdsk commands again and there weren't any errors. Didn't get a BSOD for about a week, but got one over the weekend while I was away.
    FAULTY_HARDWARE_CORRUPTED_PAGE BSOD, No errors in MEMTEST Attached Files
      My ComputerSystem Spec

 
Page 1 of 6 123 ... LastLast


Similar Threads
Thread Forum
Did MemTest test all of my RAM?
So I bought a 4GB Samsung DDR3L RAM from this guy online. It arrived yesterday, plugged it in, booted the laptop up and it worked. Just to be sure, I ran MemTest overnight last night. I set it to run at 8 passes. While running, the RAM info on...
General Support
BSOD system_service_exception and faulty_hardware_corrupted_page
I'm hoping I can get some help with BSOD issues on my fiance's computer. I've put her specs in my profile and uploaded the .zip file with the BSOD tool provided in this forum. I haven't personally seen each BSOD but the two varieties I have seen...
BSOD Crashes and Debugging
Solved About using Memtest varieties
Recently have had stack overflow warnings, which I understand can be a sign of RAM failure. Be that so, which version of the application is best for Windows 10 64 bit, please? I have also read the tutorial, but that deals only with creating a...
Software and Apps
Random BSOD FAULTY_HARDWARE_CORRUPTED_PAGE
Hello there. I getting BSOD randomly on windows 10 on my ASUS K550JK. I tried the ASUS forum but, with respect, they suck on support. I've tried the new drivers and the original ones (Windows 8). Whocrashed logs keeps telling me that it may be a...
BSOD Crashes and Debugging
Windows 10: Constant BSOD errors, different errors each time. HELP!!!!
Hi my name is Peter I am new to this so please excuse any mistakes in posting this I might make. I have very recently built myself a new pc to game on. Once I put the system together and installed windows 10 almost immediately I got BSOD with a...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:33.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums