Page 1 of 2 12 LastLast
  1.    07 May 2017 #1
    Join Date : May 2017
    Posts : 8
    windows 10 pro

    New Computer with Windows 10 Pro. BSOD while booting and normal usage


    Hello,
    this is my first thread in a forum, excuse me if i violte any Terms...
    So i built up my new pc with:
    CPU:i7 7700k
    RAM: Corsair Vengance LPX
    SSD: Samsung Evo 960
    GPU: GTX 1060
    Motherbard: MSI z270 gaming Pro Carbon

    The Hardware was checked by Mindfactory.de and they replaced the Motherboard.
    I then built up my new PC and installed Windows 10 pro. During the Installation the BSOD already occured, but somehow i managed to install the OS. Latest Drivers were installed with Driver Booster 4 and i also tried to deactivate different Drivers.
    Thank you in advance
    List of errors i get:
    NTFS.sys
    wimfsf.sys
    page fault in non paged are
    Kernel security check failure
    kmode exception not handled
    attempted execute of noexecute memory
    Last edited by donezo; 07 May 2017 at 09:22.
      My ComputerSystem Spec
  2.    08 May 2017 #2
    Join Date : Nov 2015
    Posts : 2,876
    64bit Win 10 Pro ver 1709 Build 16299.64

    Hello

    Several of the crash dump files suggest memory corruption. For this reason I would suggest you start with a memory test.



    New Computer with Windows 10 Pro. BSOD while booting and normal usage Diagnostic Test New Computer with Windows 10 Pro. BSOD while booting and normal usage
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove one of the sticks and test the remaining stick in each slot for 8 passes or until errors show, switch sticks and repeat.
      My ComputersSystem Spec
  3.    08 May 2017 #3
    Join Date : May 2017
    Posts : 8
    windows 10 pro
    Thread Starter

    RAM was checked by me and myndfactory. Had 0 errors....
      My ComputerSystem Spec
  4.    08 May 2017 #4
    Join Date : May 2017
    Posts : 8
    windows 10 pro
    Thread Starter

    RAM was checked by me and myndfactory. Had 0 errors
      My ComputerSystem Spec
  5.    09 May 2017 #5
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    did u run Memtest+ V5.01 with at least 8 passes?
      My ComputerSystem Spec
  6.    09 May 2017 #6
    Join Date : May 2017
    Posts : 8
    windows 10 pro
    Thread Starter

    Yess. Nothing found... i also tried using both solo, but still the same result...
      My ComputerSystem Spec
  7.    09 May 2017 #7
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    then your RAM should be ok. I think the tech store (mindfactory) did this right too, its an serios company, they should know what they do.

    Sorry philc for breaking in but I found a little thing in one of the dumps:
    Code:
    0x00000050:    PAGE_FAULT_IN_NONPAGED_AREA (7.05.2017 10:20:28) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
                   dump_secnvme.sys [4.08.2016]   
     
    PROCESS:       OneDriveSetup.exe 
     
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
    Code:
    Name    Samsung NVMe Controller
    Hersteller    Samsung Electronics Co., Ltd
    Status    OK
    PNP-Gerätekennung    PCI\VEN_144D&DEV_A804&SUBSYS_A801144D&REV_00\4&1A51BA9C&0&00D8
    Speicheradresse    0xDF200000-0xDF2FFFFF
    IRQ-Kanal    IRQ 4294967293
    IRQ-Kanal    IRQ 4294967292
    IRQ-Kanal    IRQ 4294967291
    IRQ-Kanal    IRQ 4294967290
    IRQ-Kanal    IRQ 4294967289
    IRQ-Kanal    IRQ 4294967288
    IRQ-Kanal    IRQ 4294967287
    IRQ-Kanal    IRQ 4294967286
    Treiber    c:\windows\system32\drivers\secnvme.sys (2.4.7.0, 80,21 KB (82.136 Bytes), 07.05.2017 01:48)

    Maybe theres a problem with your Samsung SSD 960 EVO 250GB or the associated NVMe driver.

    Please install the newest Samsung NVMe driver from here:
    Tool & Software | Download | Samsung V-NAND SSD

    Please also install the newest version of Samsung Magician Software and check if there are firmware update for the SSD available.
      My ComputerSystem Spec
  8.    09 May 2017 #8
    Join Date : Nov 2015
    Posts : 2,876
    64bit Win 10 Pro ver 1709 Build 16299.64

    @BSODHunter thanks for checking back through the dumps, I had not had time to do this since the OP had ruled out RAM errors. Good find!
      My ComputersSystem Spec
  9.    10 May 2017 #9
    Join Date : May 2017
    Posts : 8
    windows 10 pro
    Thread Starter

    Installed the newest nvme driver, but it doesnt solve my problem.... tried it also with a different ssd and had the same results.
      My ComputerSystem Spec
  10.    10 May 2017 #10
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    U switched to another SSD in the same computer on the same SATA Port with same SATA cable and clean installed an fresh windows 10?
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
0xc000000f when booting straight from ssd - is it normal?
Hello forum, I've upgraded from w7 to w10 this morning and there's something I'm not very sure about. I've done a clean install from a usb drive and everything works fine, but a new option has appeared on my boot sequence called "windows boot...
General Support
Computer not booting up after BSOD
I am using Dell inspiron laptop (pretty old one) which started acting weirdly. Upon examining, there was a problem with HDD so I had it changed. As soon as I got new HDD installed and installed Windows 10 on it, computer started acting weird...
BSOD Crashes and Debugging
Freezing upon waking computer and booting, No BSOD however.
Just to preface this I have not received a BSOD when this happens so I hope I'm still posting this in the correct location. However my laptop just freezes completely and I have to do a hard shutdown (holding the power button until it shuts off)...
Performance & Maintenance
Solved what is normal swap usage?
I have 8 gb ram my rainmeter system monitor says cpu 5% ram 33% swap 34% is that swap normal? I don't have any heavy applications open, and haven't done hardly anything on the computer since restarting.
Performance & Maintenance
Solved Freezing upon waking computer and booting, No BSOD however.
Just to preface this I have not received a BSOD when this happens so I hope I'm still posting this in the correct location. However my laptop just freezes completely and I have to do a hard shutdown (holding the power button until it shuts off)...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:50.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums