New Computer with Windows 10 Pro. BSOD while booting and normal usage

Page 1 of 2 12 LastLast

  1. Posts : 8
    windows 10 pro
       #1

    New Computer with Windows 10 Pro. BSOD while booting and normal usage


    Hello,
    this is my first thread in a forum, excuse me if i violte any Terms...
    So i built up my new pc with:
    CPU:i7 7700k
    RAM: Corsair Vengance LPX
    SSD: Samsung Evo 960
    GPU: GTX 1060
    Motherbard: MSI z270 gaming Pro Carbon

    The Hardware was checked by Mindfactory.de and they replaced the Motherboard.
    I then built up my new PC and installed Windows 10 pro. During the Installation the BSOD already occured, but somehow i managed to install the OS. Latest Drivers were installed with Driver Booster 4 and i also tried to deactivate different Drivers.
    Thank you in advance
    List of errors i get:
    NTFS.sys
    wimfsf.sys
    page fault in non paged are
    Kernel security check failure
    kmode exception not handled
    attempted execute of noexecute memory
    Last edited by donezo; 07 May 2017 at 09:22.
      My Computer


  2. Posts : 5,169
    64bit Win 10 Pro ver 21H2
       #2

    Hello :)

    Several of the crash dump files suggest memory corruption. For this reason I would suggest you start with a memory test.



    Diagnostic Test

     RAM TEST


    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.

    Addition:
    If errors show up you can stop the test, remove one of the sticks and test the remaining stick in each slot for 8 passes or until errors show, switch sticks and repeat.
      My Computers


  3. Posts : 8
    windows 10 pro
    Thread Starter
       #3

    RAM was checked by me and myndfactory. Had 0 errors....
      My Computer


  4. Posts : 8
    windows 10 pro
    Thread Starter
       #4

    RAM was checked by me and myndfactory. Had 0 errors
      My Computer


  5. Posts : 926
    Windows 10 Pro
       #5

    did u run Memtest+ V5.01 with at least 8 passes?
      My Computer


  6. Posts : 8
    windows 10 pro
    Thread Starter
       #6

    Yess. Nothing found... i also tried using both solo, but still the same result...
      My Computer


  7. Posts : 926
    Windows 10 Pro
       #7

    then your RAM should be ok. I think the tech store (mindfactory) did this right too, its an serios company, they should know what they do.

    Sorry philc for breaking in but I found a little thing in one of the dumps:
    Code:
    0x00000050:    PAGE_FAULT_IN_NONPAGED_AREA (7.05.2017 10:20:28) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
                   dump_secnvme.sys [4.08.2016]   
     
    PROCESS:       OneDriveSetup.exe 
     
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
    Code:
    Name    Samsung NVMe Controller
    Hersteller    Samsung Electronics Co., Ltd
    Status    OK
    PNP-Gerätekennung    PCI\VEN_144D&DEV_A804&SUBSYS_A801144D&REV_00\4&1A51BA9C&0&00D8
    Speicheradresse    0xDF200000-0xDF2FFFFF
    IRQ-Kanal    IRQ 4294967293
    IRQ-Kanal    IRQ 4294967292
    IRQ-Kanal    IRQ 4294967291
    IRQ-Kanal    IRQ 4294967290
    IRQ-Kanal    IRQ 4294967289
    IRQ-Kanal    IRQ 4294967288
    IRQ-Kanal    IRQ 4294967287
    IRQ-Kanal    IRQ 4294967286
    Treiber    c:\windows\system32\drivers\secnvme.sys (2.4.7.0, 80,21 KB (82.136 Bytes), 07.05.2017 01:48)

    Maybe theres a problem with your Samsung SSD 960 EVO 250GB or the associated NVMe driver.

    Please install the newest Samsung NVMe driver from here:
    Tool & Software | Download | Samsung V-NAND SSD

    Please also install the newest version of Samsung Magician Software and check if there are firmware update for the SSD available.
      My Computer


  8. Posts : 5,169
    64bit Win 10 Pro ver 21H2
       #8

    @BSODHunter thanks for checking back through the dumps, I had not had time to do this since the OP had ruled out RAM errors. Good find!
      My Computers


  9. Posts : 8
    windows 10 pro
    Thread Starter
       #9

    Installed the newest nvme driver, but it doesnt solve my problem.... tried it also with a different ssd and had the same results.
      My Computer


  10. Posts : 926
    Windows 10 Pro
       #10

    U switched to another SSD in the same computer on the same SATA Port with same SATA cable and clean installed an fresh windows 10?
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:34.
Find Us




Windows 10 Forums