Non-Stop BSOD's brand new system, IRQL, KMODE, ntoskrnl, etc Solved

  1.    #1

    Non-Stop BSOD's brand new system, IRQL, KMODE, ntoskrnl, etc

    Hello, thanks in advance for anyone willing to help me, because this is starting to drive me a little batty... I've been building computers for over 20 years now and have never run into this many problems...

    so basically about a month I built a new system from scratch based around a i7 7700k processor (never overclocked it or anything crazy). I got it put together just fine and installed windows (been using 8.1) without any problems. After setting it up I started getting hit with random BSODs, all related to the network card. I googled all the errors and did everything suggested (including getting updated ethernet drivers straight from intel) until I decided it that was more than likely a faulty network card on the motherboard. So I RMA'd it (it was a ASRock Z270 KILLER SLI/AC LGA 1151 for the record), they sent me another Asrock board, got it back back together and reinstalled windows and BOOM, back to non-stop BSOD's, once again pointing to bad network drivers. Thinking I got another bad motherboard, I sent it back again and then this time insisted they let me swap it for a different brand, thinking maybe Asrock just had a bad run or something. So instead I got a MSI Z270 Gaming M3 (purposely because it had an entirely different Ethernet chipset), wiped the hard drive clean and did a fresh install of windows 8.1 and.... back to BSOD land, and yet again, pointing to the network drivers as the reason. I flashed the bios on every board before sending them back but that also didn't help. I've even tried downloading every windows update available with no luck or change.

    Having no idea what to do at this point I decided to send the RAM back as well, got a new set, new install, same errors. Decided to take some ram out of a working system, fresh install windows 8.1, hit with network BSODs again. thinking maybe there was something wrong with the m.2 hard drive I decided to try and install windows on a regular sata drive, same network errors. I tried taking out the video card and reinstalling windows using only the onboard video, same errors. So at this point I really don't know what to do, the only parts I haven't returned/swapped yet are the processor and the power supply, and now it's way too late to try and return them because I burned over a month swapping the other parts.... I can try and get my year warranty from intel, but before I begin that battle I thought maybe I should seek out additional help. The logs keep insisting its not hardware related, but i don't know what to think any more.

    I downloaded the CPU test programs from intel's site and I ran all the tests and it says it passed, I also did memtest86 on both the new set of ram and the set pulled from a working system, no errors detected. I can't see how a power supply can affect a lan port on three different motherboards, so I'm really confused on what to do here. here's all my minidump logs from my latest build, hopefully someone can provide me with some information. The logs keep insisting its not a hardware error, but really what else could it be? Thanks so much!
      My ComputerSystem Spec

  2. Ztruker's Avatar
    Posts : 7,821
    Windows 10 Pro X64 1809 17763.437

    Since you are running Windows 8.1 you need to post this in the BSOD Crashes and Debugging - Windows 8 Forums.

    This one is for Windows 10.
      My ComputersSystem Spec

  3.    #3

    ah crap my mistake, could have sworn i was on the eight forums, sorry about that!
      My ComputerSystem Spec

  4. Ztruker's Avatar
    Posts : 7,821
    Windows 10 Pro X64 1809 17763.437

    Not a problem. I just think you will get better Win 8 support there.
      My ComputersSystem Spec


Related Threads
Morning Gents, I build a new rig about two weeks ago. I had zero issues with setup and installation. Last night I got a BSOD while playing a game on steam and using discord. From there the BSODs happened within minutes of rebooting.. I...
Hello everyone, I am new to this forum . For some weeks I switched to Windows 10 , and ever since I installed it gives me constant BSOD , I have not done any overclocking on the CPU . I tried several diagnostic programs , memtest , fun mark and I...
There's not much to explain as it can occur randomly, I am guessing it is some driver conflict but I am not tech savvy, regardless, the BSODs are caused by NTFS.sys and ntoskrnl.exe. Here's an image from BlueScreenView 40292
IRQL/KMODE when I watch a stream/video in BSOD Crashes and Debugging
Hello everyone, I have this issue for about a month already. Starting with Windows 7 I thought the problem would resolve itself once I switched over to Windows 10. Sadly I was mistaken, IRQL_NOT_LESS_OR_EQUAL and KMODE_EXCEPTION_NOT_HANDLED BSOD...
Persistent IRQL/KMODE Blue Screens in BSOD Crashes and Debugging
Hey guys & gals! I need some help diagnosing a few BSODs I've been having. I think the BSODs are driver related because I have ran memtest86+ for 8 passes no errors, as well as chkdisk and seatools with no problems. Yesterday I installed W10TP...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:15.
Find Us