BSOD kmode exception not handled boot loop

Hi,
today I got a very ridiculous problem with my computer. First of all, CPU, RAM & mainboard are new since january (System Infos in my profile)

I was away for a few minutes after watching youtube videos and I saw that my pc was in a boot loop with
the bsod message KMODE_EXCEPTION_NOT_HANDELED.

So first of all I plugged out all usb devices. Bsod still keeps. Then I plugged out my graphics card. Nothing changes.
Then I tested my RAM with Memtest86+, no errors.

Then I downloaded the newest Windows 10 ISO(from another computer), because I thought it was a Windows boot problem. So I burned the boot DVD but I couldn't start the setup. It showed "Please press any key to boot from CD/DVD.." But every time I pressed a key the cursor keeps blinking and nothing happend.

Then I thought it could be a DVD drive fail and so I plugged in an external USB DVD drive. But with the same behavior. Then I plugged out the BIOS battery for a reset.

Nothing changed.

I tried Hirens Boot CD, the mini Windows XP wasn't loading because of an ACPI bluescreen but I was able to boot the lunix system this CD.

Then back to the RAM, I plugged out one of two. Nothing changed. Then later the another one.

Then I tried an older ISO, and the DVD was loading. But even before the language selection was showed I got the same bsod screen as always. And I know I already used this ISO to install my Windows 10 on this system.

Then I plugged out every HDD, execpt a data HDD, and the internal DVD Drive. Nothing changed.


So I dont't have any further ideas.

Maybe you guys. I can not believe its the boad because its brand new. The RAM? No error In Memtest86+ and the linux was booted.


Please help

Ztruker said:

Can you boot Linux again. If yes, zip the dumps from the Windows boot drive (may or may not be C: } in \Windows\minidump and upload the resulting zip file here.

Thank you for your answer. I attached it here but I think they are all empty.

What is the make and model of your computer? Each computer manufacture has a F key to choose the boot device. For HP computers it is the F9 key. If you can find the F key then you may be able to boot to the windows 10 iso and use the windows troubleshooting menu. If you can not determine the F key you may be able to use the appropriate F key to boot to the bios and change the boot order so that the USB port is on top. Then you can reset with save files, in place upgrade, clean install, command prompt etc.
Some computer manufacturers have bios UEFI diagnostics. If you can boot to the bios you may be able to run extensive checks or component tests. If your computer manufacturer has UEFI diagnostics by download you may be able to use linux.

As I wrote in my first post I was able to start from Windows 10 DVD, but even before any menu was popped up the bsod appeared again without any internal devices plugged in.

Ztruker said:

Yes, empty. Not sure how you created the zip file but try it again.

Hi,

Dropbox - dmpfiles.zip

I uploaded some dmp files here.

I recently experienced the KMODE_EXCEPTION_NOT_HANDELED bsod loop. To get my system working again i had to do the following:
Boot from a Windows 10 boot disk (the disk which came with my PC, but I'm sure you could make a bootable Win10 USB too nowadays).
Select the windows language/region, and choose "repair windows"
Select Troubleshoot, select Advanced options and click System Restore.
Enter System Restore, and restore from a previous available restore point.


I don't know the cause of the issue, likely a Windows Update had triggered something nasty to happen.
Anyway, this fixed it for me. Posting it here, as this happened me today, and this forum post was one of the first results i found with a google search.