1.    02 May 2017 #1
    Join Date : May 2017
    Posts : 2
    Windows 10 Home

    BSOD Problem ntsokrnl.exe, not reproducable

    Good evening!

    I hope someone on this board can help me with solving a BSOD problem I am carrying around since months now.

    My computer suffers from random BSODs (mainly PAGE_FAULT, IRQL_NOT_LESS and MEMORY_MANAGEMENT) since months and I can not figure out what is causing my problems. I can not reproduce the error.

    I have performed a clean install of all drivers, did a BIOS update, installed all Windows updates but the error keeps returning. It does not matter what I am doing with my computer, be it browsing, gaming or just idling.

    In the last four weeks it sometimes crashed even right after starting the PC, not even booting into Windows.

    On good days i can play for hours onwards, on bad days it crashes every 15 minutes. Lately, the Problem gets worse.

    My (custom built) PC:

    Asus Maximus Ranger VII
    Intel I7 4790
    EVGA GTX 1080 Classified
    2x 8GB Corsair LP 1600 RAM
    2x Samsung SSDs
    Windows 10 Home (Creators Update is installed)

    I did not overclock my computer, the RAM timings are in accordance to the manufacturers manual. Messing around with the pagefile did not help either.

    I attached the .zip file including the .dmp files. Sometimes my computer crashed without creating a .dmp and a bluescreen, the screen just frozed with an endless sound-loop.

    I am looking forward to your feedback! I hope someone can help me identify what is causing the crashes.
      My ComputerSystem Spec
  2.    03 May 2017 #2
    Join Date : Jan 2017
    Posts : 730
    Windows 10 Pro

    Servus ;-)

    There are many different bugchecks in the dumpfiles.

    The cause for different error codes are usually hardware and lower level problems.

    U should begin with:

    BSOD Problem ntsokrnl.exe, not reproducable Diagnostic Test BSOD Problem ntsokrnl.exe, not reproducable

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note
    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Make a photo of the result and post it.
      My ComputerSystem Spec
  3.    04 May 2017 #3
    Join Date : May 2017
    Posts : 2
    Windows 10 Home
    Thread Starter


    my RAM was damaged, i already replaced it with a set of faster modules and now its working like a charm. Thank you for your help.
      My ComputerSystem Spec
  4.    05 May 2017 #4
    Join Date : Jan 2017
    Posts : 730
    Windows 10 Pro

    Glad to hear that your problem is now fixed. Let us know if there are any other problems.
      My ComputerSystem Spec


Similar Threads
Thread Forum
BSOD too many time with error ntsokrnl ao fileinfo.sys
dear all my friend, please hep me with my pc, i run a pc with amd processor, the bsod happen too many time, even when my pc in idle mode, or when i play video or browsing only, i already update all driver but the problem still persist, and my pc...
BSOD Crashes and Debugging
SynTP.sys BSOD caused by Hal.dll and ntsokrnl.exe
Hello, I have noticed I keep having SynTP BSODs from the two files hal.dll and ntoskrnl.exe. It can be rather annoying, this happens rather sporadically, with months going by without a BSOD or it can be more frequent. I know SynTP is caused by...
BSOD Crashes and Debugging
Solved BSOD 0x3b ntsokrnl.exe+142760
hi out there BSOD as postet above. Occurs from time to time while gaming or tabbing while gaming (especially guildwars 2). Occurs also sometimes on startup (after login into windows). Mostly SYSTEM_SERVICE_EXCEPTION sometimes other BSOD with...
BSOD Crashes and Debugging
BSOD code 0x133 caused by hal.dll & ntsokrnl.exe
I'm running a genuine MSDN copy of Windows 10 Enterprise. Recently from past month, the laptop has started behaving weirdly. Earlier the issue was that it would hang and after waiting hours I had to shut it down forcibly and then when re-starting,...
BSOD Crashes and Debugging
bsod problem
I made a thread before this under hardware but its not hardware. My computer freezes and I get this blue screen error. I DO NOT SEE A BLUE SCREEN. THIS IS FROM A MINIDUMP. PAGE_NOT_ZERO. I have provived a zip with the Minidump in it. 19226
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:06.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App

Windows 10 Forums