1.    28 Apr 2017 #1
    Join Date : Oct 2016
    Posts : 13
    Windows 10

    BSOD's on Windows 10 installation


    Hello,

    So I've got a laptop from a friend that had some issues with it. His laptop started giving blue screen errors only when playing CS:GO (other games worked fine). Then he updated his drivers and few days later his laptop would give BSOD at start up with this message: "Inaccessible Boot Device ".

    After that, the laptop was going into a constant loop of Windows Repair then going to BSOD again(even in safe mode). I used Active Boot Disk to make sure he back-ups his data (no BSOD while on Boot Disk).

    Then we decided to perform a clean installation on the laptop, and we did that with various of Windows 10 installations but every time the laptop would give BSOD during Windows 10 configuration (account name, password etc..). The laptop has 2 hard drives (1 SSD, 1 HDD) and I tried installing Windows 10 on both drives but still same result.

    Most common BSOD messages were:
    • irql_not_less_or_equal
    • kernel_security_check_failure


    I did some diagnostic checks (RAM and Hard Disks) using the laptop's own tools and everything seemed fine without errors.

    I only managed to get his Minidump files before his laptop was unable to boot to see if a driver was interrupting the game but I couldn't make much of it, so maybe you guys can see something that I don't.

    Here are the files: Attachment 132340

    I hope you can help us out

    Thank you!

    Edit: Just noticed the instructions for posting a BSOD thread, unfortunately I can't run DM Log Collector Tool since the laptop doesn't even boot to Windows.
      My ComputerSystem Spec
  2.    28 Apr 2017 #2
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    There are many different bugchecks in the dumpfiles.

    The cause for different error codes are usually hardware and lower level problems.

    U should begin with:



    BSOD's on Windows 10 installation Diagnostic Test BSOD's on Windows 10 installation
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.
      My ComputerSystem Spec
  3.    28 Apr 2017 #3
    Join Date : Oct 2016
    Posts : 13
    Windows 10
    Thread Starter

    Quote Originally Posted by BSODHunter View Post
    There are many different bugchecks in the dumpfiles.

    The cause for different error codes are usually hardware and lower level problems.

    U should begin with:



    BSOD's on Windows 10 installation Diagnostic Test BSOD's on Windows 10 installation
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.
    Hello, thanks, I'm running Memtest now. So far no errors but I will let it run overnight just to be sure.

    What other possible hardware issues could cause this? I thought it would be a faulty SSD at first, but I also tried to install it on the second drive and still got a BSOD so I guess that excludes any hard disk errors? The laptop is relatively new so I guess its rare to see a faulty CPU or Motherboard on a new laptop?

    Thanks
      My ComputerSystem Spec
  4.    28 Apr 2017 #4
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    u can try to boot into safemode. If this works it could be driver issues too:

    Boot into Safe Mode on Windows 10 - Windows 10 Performance Maintenance Tutorials
      My ComputerSystem Spec
  5.    28 Apr 2017 #5
    Join Date : Oct 2016
    Posts : 13
    Windows 10
    Thread Starter

    Quote Originally Posted by BSODHunter View Post
    u can try to boot into safemode. If this works it could be driver issues too:

    Boot into Safe Mode on Windows 10 - Windows 10 Performance Maintenance Tutorials
    I tried that before and after reinstalling Windows, still the same result.
      My ComputerSystem Spec
  6.    28 Apr 2017 #6
    Join Date : Oct 2016
    Posts : 13
    Windows 10
    Thread Starter

    I managed to get past Windows configuration and I got into Windows, but it still gives blue screens after 1-2 minutes max. However I managed to run DM Log Collector Tool. I attached the zip file.

    I appreciate any help!

    Thanks
      My ComputerSystem Spec
  7.    28 Apr 2017 #7
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Code:
    0x0000000A:    IRQL_NOT_LESS_OR_EQUAL (28.04.2017 15:23:08) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
                   Netwtw04.sys [24.07.2016]   
     
    PROCESS:       System 
     
    Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility 
    
     
    ============================================================================================================== 
     
     
    0x00000050:    PAGE_FAULT_IN_NONPAGED_AREA (28.04.2017 15:21:08) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       MsMpEng.exe 
     
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS 
    
     
    ============================================================================================================== 
     
     
    0x0000000A:    IRQL_NOT_LESS_OR_EQUAL (28.04.2017 15:18:34) [Windows 10] 
     
    CAUSED BY:     wdiwifi.sys [19.10.2030] * WDI Driver Framework Driver   
                   Netwtw04.sys [24.07.2016]   
     
    PROCESS:       System 
     
    Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility 
     
     
    ============================================================================================================== 
     
     
    0x000000D1:    DRIVER_IRQL_NOT_LESS_OR_EQUAL (28.04.2017 15:15:10) [Windows 10] 
     
    CAUSED BY:     Netwtw04.sys [24.07.2016]   
     
    PROCESS:       System 
     
    Usual causes:  Device driver 
    
     
    ============================================================================================================== 
     
     
    0x00000050:    PAGE_FAULT_IN_NONPAGED_AREA (28.04.2017 15:06:50) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       dwm.exe 
     
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS 
     
     
    ==============================================================================================================

    50/50 RAM Failure & Wifi Drivers

    Should wait till memtest finished min 8 passes. U should try to update or roll back all the network drivers (wifi)

    Intel(R) Wireless Adapter Driver for Windows 10 - 64 Bit
      My ComputerSystem Spec
  8.    28 Apr 2017 #8
    Join Date : Oct 2016
    Posts : 13
    Windows 10
    Thread Starter

    Quote Originally Posted by BSODHunter View Post
    Code:
    0x0000000A:    IRQL_NOT_LESS_OR_EQUAL (28.04.2017 15:23:08) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
                   Netwtw04.sys [24.07.2016]   
     
    PROCESS:       System 
     
    Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility 
    
     
    ============================================================================================================== 
     
     
    0x00000050:    PAGE_FAULT_IN_NONPAGED_AREA (28.04.2017 15:21:08) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       MsMpEng.exe 
     
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS 
    
     
    ============================================================================================================== 
     
     
    0x0000000A:    IRQL_NOT_LESS_OR_EQUAL (28.04.2017 15:18:34) [Windows 10] 
     
    CAUSED BY:     wdiwifi.sys [19.10.2030] * WDI Driver Framework Driver   
                   Netwtw04.sys [24.07.2016]   
     
    PROCESS:       System 
     
    Usual causes:  Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility 
     
     
    ============================================================================================================== 
     
     
    0x000000D1:    DRIVER_IRQL_NOT_LESS_OR_EQUAL (28.04.2017 15:15:10) [Windows 10] 
     
    CAUSED BY:     Netwtw04.sys [24.07.2016]   
     
    PROCESS:       System 
     
    Usual causes:  Device driver 
    
     
    ============================================================================================================== 
     
     
    0x00000050:    PAGE_FAULT_IN_NONPAGED_AREA (28.04.2017 15:06:50) [Windows 10] 
     
    CAUSED BY:     memory_corruption    
     
    PROCESS:       dwm.exe 
     
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS 
     
     
    ==============================================================================================================

    50/50 RAM Failure & Wifi Drivers

    Should wait till memtest finished min 8 passes. U should try to update or roll back all the network drivers (wifi)

    Intel(R) Wireless Adapter Driver for Windows 10 - 64 Bit
    Memtest stopped after 4 passes and showed no errors. I think the new version (MemTest86 V7.3 Free Edition) only goes up to 4 passes? I'm not sure its been a long time since I used Memtest.

    The WiFi part seems interesting because sometimes I get an instant blue screen when I enable it, but sometimes I still get a blue screen even if its disabled. Also I don't think the WiFi drivers matters because even in safe mode I still get BSOD. The only thing I haven't tried was updating the BIOS, but I didn't want to risk doing anything that could break the warranty.
      My ComputerSystem Spec
  9.    02 May 2017 #9
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Please use latest version of memtest, its V5.01: Memtest86+ - Advanced Memory Diagnostic Tool

    its essential to run THIS version at least 8 passes.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Windows 10 BSOD and updates failed installation
126842 I need help on how to fix these two problems. I don't really know what's causing the blue screen of death, it could be a software I had previously installed but since I did a system restore that should not be a problem. My computer installed...
BSOD Crashes and Debugging
BSOD on a brand new installation of windows 10 64 bit.
Hello Im getting BSOD on a brand new installation of windows 10 64 bit. heres the details. im quite sure a driver issue, heres the logs. Many thanks
BSOD Crashes and Debugging
Solved Custom Built PC - BSOD During Windows 10 Installation
I'm having ongoing issues with getting BSODs while attempting to do a clean install of Windows 10 on a new PC that I just built. Here are the specs: CPU: AMD FX-9370 MB: Gigabyte GA-990FX-GAMING GPU: Nvidia Geforce GTX 770 HDD: 240GB OCZ...
Installation and Upgrade
Solved Windows 10 installation from Windows 7 Pro - BSOD after installation
Hi I have been trying to install windows 10 since launch day. However i have been somewhat unsuccessful. Win 10 installs successfully but when the computer does the setting up of Apps at its first run it crashes to BSOD -...
Installation and Upgrade
BSOD during Windows 10 installation
So I can't upgrade to windows 10. I keep getting a SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (wdf01000.sys) error. Then I am stuck until my PC restarts a few times and rolls back to Windows 7 Pro. I am attaching the debug to see if anyone can help me...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:00.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums