1.    20 Apr 2017 #1
    Join Date : Apr 2017
    Posts : 3
    Windows 10

    After Windows 10 Installation BSOD SYSTEM THREAD EXCEPTION NOT HANDLE


    Hello,

    Well
    Well I comment, I have almost six months ago a pc with these components.

    CPU: i5-6600
    Motherboard: MSI B150M PRO-VH
    Ram: x2 HYPERX 4GB 2133MHZ DDR4 CL13 DIMM
    VGA: MSI RX 480 8GB
    SSD: 275GB SSD MX300 SATA 2 5 Kingston
    HDD: Western Digital Blue 1TB Sata3 3.5' 7200rpm
    PSU: EVGA 600W 80 Plus Certificada
    Cabinet: Versa N21
    WINDOWS 10

    The first month did not present any problem, until one morning when I turned it on I threw myself a BSOD.

    KMODE EXCEPTION NOT HANDLED (CI.dll) and then SYSTEM THREAD EXCEPTION NOT HANDLED (CI.dll)


    Try everything until I did a clean install of Windows 10, always having the same error.

    Disassemble and reassemble everything, always having the same result.
    Send the parts under warranty, except hard drives and PSU. As a result they told me that they had no problems, I reassembled the pieces and I was able to work with my computer as before, play and everything, until I returned to present the same problem. That if every time I started and presented the BSOD this happened 3 or 4 times and then continued normal.

    Do until one day, memtest, without errors. CHKDSK without errors. Processor without errors (intel software).

    I bought another board (MSI h110m) and another Ram (Crucial DDR4 8GB 2133). Always the same result, can install windows 10, but when doing the reboot to finish installing the BSOD appears and fall in a infinite loop.

    Please help me, and sorry for my english. Bless!
    Last edited by on3l0ve; 20 Apr 2017 at 21:00.
      My ComputerSystem Spec
  2.    20 Apr 2017 #2
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,335
    Windows 10 Pro X64 16299.19

    Please read and follow the instructions here: Blue Screen of Death (BSOD) Posting Instructions
      My ComputersSystem Spec
  3.    20 Apr 2017 #3
    Join Date : Apr 2017
    Posts : 3
    Windows 10
    Thread Starter

    thanks i edit the post
      My ComputerSystem Spec
  4.    20 Apr 2017 #4
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,335
    Windows 10 Pro X64 16299.19

    You have windows 8, not 10. Please post your question/problem in the Windows 8 BSOD Crashes and Debugging - Windows 8 Forums
      My ComputersSystem Spec
  5.    20 Apr 2017 #5
    Join Date : Apr 2017
    Posts : 3
    Windows 10
    Thread Starter

    As it says in the thread, I can not finish the installation of windows 10, so I must install the program that asks for an OS that can access in this case windows 8.
      My ComputerSystem Spec
  6.    21 Apr 2017 #6
    Join Date : Apr 2014
    Space coast of Florida
    Posts : 5,335
    Windows 10 Pro X64 16299.19

    Sorry, it was not obvious to me that you had reinstalled Windows 8. Unfortunately, without the dumps from when you were installing Windows 10, there is nothing for me to go on.

    What may work is for you to create a Rescue disc or flash drive. I recommend this one: Windows 10 Recovery Tools - Bootable Rescue Disk from KYHI. Create it then boot it to make sure it works for you. Once you are sure it does, start the Windows 10 Clean Install again. Once you have the BSOD9s) then boot the Rescue disc or flash drive and zip up and dumps in C:\Windows\minidump. Upload the zip file in a post here.

    Also check if there is a C:\Windows\memory.dmp. If yes, zip it up and upload to a file sharing site like OneDrive then post a link to in here.

    That way there should be something I can look at to figure out what is causing the problem.
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
Windows 10, BSOD, System Thread Handler exception : UNABLE SAFE MODE
Hiya everyone, So basically here is the situation... I'm at the point where I don't know what else to do other than RE-INSTALL .. which is a pain in the @^& if I have to reinstall and reconfigure all the software that is installed already..... I'd...
BSOD Crashes and Debugging
Solved Windows 10 BSOD nvlddmkm.sys system thread exception not handled
Having some annoying issues tonight with my PC, ended up reinstalling windows 10 and the same issues are cropping up. I've attached the dump files. My pc has been overclocked for a while with no issues, playing path of exile; the game began to...
BSOD Crashes and Debugging
BSOD System Thread Exception help
The issue with by BSOD is I don't know what it is triggered by, it happens when gaming, sometimes when I watch streams and other times when I just use my PC to browse reddit and other sites. 6337663376
BSOD Crashes and Debugging
BSOD system thread exception
Finally got into safe mode through command prompt and was able to delete the driver from my Nvidia graphics card. Booted back up in normal mode and began the download for new driver. Then BSOD during installation. Ideas? Would love to put my...
BSOD Crashes and Debugging
BSOD, System Thread exception not handled
Hey, tried several times to upgrade from Win7 64bit to Win 10. After upgrade i mostly could login and then get BSOD sometimes after a few seconds, other times i could use edge and chrome for several minutes. The weird thing was that starting task...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:22.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums