Page 1 of 3 123 LastLast
  1.    29 Mar 2017 #1
    Join Date : Mar 2017
    Posts : 15
    Windows 10

    mutiple BSOD by just starting the computer or opening anything


    Hello, I just build my first pc following all the instructions and everything, installing all the software and drivers and windows 10 but every time I try to do something appears BSOD, try multiple fixes , reinstall windows multiple times, but still keeps appearing BSOD every time, I' m not sure what is failing.

    The main BSOD had were
    DRIVER_OVERRAN_STACK_BUFFER
    BSOD Page Fault In Nonpaged Area
    attempted execute of noexecute memory
    My Specs are:Motherboard: Msi z170a pro carbonPsu: evga 750w G2Graphics: Asus Turbo Nvidia GeForce gtx 1080 8GCPU: Intel(R) Core(TM) i5-7600K CPU @ 3.80GHz RAM: 2x 8GB corsair vengeance lpx ddr4 3000 mhzHDD: Seagate 1TB Barracuda Sata 6GB/sCooler : H100i v2Windows 10 Home (for the moment)Not overclocking*Checked windows memory diagnostic*Verifier starts another BSOD i/o *used ccleaner*tried to troubleshoot and repair*
    also windows memory diagnistic*

    ran memtest86 for 1 memory ram 0 errors
    trying the other one for the moment
      My ComputerSystem Spec
  2.    29 Mar 2017 #2
    Join Date : Nov 2015
    Posts : 2,859
    64bit Win 10 Pro ver 1709 Build 16299.64

    Hello and welcome to TenForums

    Looking at the crash dumps shows there is a problem with the Malwarebytes Chameleon protection driver:

    Code:
    BugCheck 1E, {ffffffffc000001d, fffff802366e154e, ffffe284403ec080, 0}
    
    *** WARNING: Unable to verify timestamp for MBAMChameleon.sys
    *** ERROR: Module load completed but symbols could not be loaded for MBAMChameleon.sys
    Probably caused by : MBAMChameleon.sys ( MBAMChameleon+177b )
    It would be worth completely removing this software to see if it helps. Windows Defender will continue to protect you while troubleshooting.

    Continue with your memory testing and let us know the results:


    mutiple BSOD by just starting the computer or opening  anything Diagnostic Test mutiple BSOD by just starting the computer or opening  anything
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.


    Make a photo of the result and post it.
      My ComputersSystem Spec
  3.    29 Mar 2017 #3
    Join Date : Mar 2017
    Posts : 15
    Windows 10
    Thread Starter

    Hello again,
    Thank you for the support, still having BSOD after unistalling and running 12 passes of my RAM
    When I try to open a game or anything instantly appear the app or *game stopped working, close the program* then a BSOD page fault in nonpaged area or still driver overran stack buffer( I attached the report)
    when I tried to reset my PC it appears the following message and then it resets:
    -6
    explorer.exe - Application Error
    The instruction at 0x000000006A7D4A97 referenced memory at 0x000000006A7D4A97. The memory could not be written.
    Click OK to terminate the program

    MemTest86 photos are 8 passes for 2 ram, and 4 passes for 1 by itself




    Thank You.
    Last edited by nkasterz; 30 Mar 2017 at 07:11.
      My ComputerSystem Spec
  4.    30 Mar 2017 #4
    Join Date : Nov 2015
    Posts : 2,859
    64bit Win 10 Pro ver 1709 Build 16299.64

    The most recent crash dumps still indicate Malwarebytes drivers are loading and possibly causing problems. Did you completely uninstall it? Try this uninstaller: http://www.malwarebytes.org/mbam-clean.exe
      My ComputersSystem Spec
  5.    30 Mar 2017 #5
    Join Date : Mar 2017
    Posts : 15
    Windows 10
    Thread Starter

    Hello phil I reinstall windows and update all drivers but bsod still appearing by that moment, I was looking for ram problems and some people are having problems by putting the ram sticks on dimm2 and dimm4 or 1 and 3 in similar msi motherboard so I tried for now the dimm1 and dimm 2 together as some people say that worked on them and is working fine for the moment installed OS in a ssd running fine no Bsod by the moment
      My ComputerSystem Spec
  6.    30 Mar 2017 #6
    Join Date : Nov 2015
    Posts : 2,859
    64bit Win 10 Pro ver 1709 Build 16299.64

    Putting the RAM sticks together rather than in slots 2 and 4 simply makes them work separately and without the dual channel memory feature. In practice this makes the system run a little slower but you won't notice much difference. It maybe that it is enough to reduce the BSOD events. Were both sticks bought together as a matched pair? If not then that is possibly why they are not working in dual channel mode.
      My ComputersSystem Spec
  7.    30 Mar 2017 #7
    Join Date : Mar 2017
    Posts : 15
    Windows 10
    Thread Starter

    Yes same pair 8gb x2 3000mhz but i dont understand in the manual of the mobo says channel A where dimm1 and dimm2 are connected and channel B dimm3 and dimm4 are connected , unsure but always says put dimm2 first
      My ComputerSystem Spec
  8.    30 Mar 2017 #8
    Join Date : Nov 2015
    Posts : 2,859
    64bit Win 10 Pro ver 1709 Build 16299.64

    Yes, I always use slots 2 and 4, they are often coloured differently to indicate you should use them. So one is in Ch A and the other in Ch B for dual channel memory mode
      My ComputersSystem Spec
  9.    30 Mar 2017 #9
    Join Date : Mar 2017
    Posts : 15
    Windows 10
    Thread Starter

    Yes makes sense i did not have a bsod yet but with any app or game i open still is stopping and force me to close the program
      My ComputerSystem Spec
  10.    30 Mar 2017 #10
    Join Date : Nov 2015
    Posts : 2,859
    64bit Win 10 Pro ver 1709 Build 16299.64

    It would not hurt to verify all your system files are correct with the SFC /scannow command in a Command Prompt.
      My ComputersSystem Spec

 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
BSOD when starting computer mainly playing games
Hello, I have been getting BSOD in games such as CS GO and Alan Wake - sometimes i do not get a blue screen but just a black screen and them same noise it would make through the speakers, if it were to blue screen. I have done a memtest for...
BSOD Crashes and Debugging
Solved Frequent BSOD starting/waking computer
Hello, A few months ago my PC started having random BSOD issues when starting and waking from sleep mode but it was only about 1 every few weeks. The issue became more and more frequent however until a couple of weeks ago when it started having...
BSOD Crashes and Debugging
BSOD when starting computer first time in day. sometimes in game
Hello, I have had many BSODs regarding ntoskrnl.exe, FLTMGR.SYS, WdFilter.sys since I have updated to Windows 10 from Windows 7. I have checked drivers, memtest, and bios drivers. All is fine. Memtest for a whole night. Specs: i7 4970k gtx 1080...
BSOD Crashes and Debugging
Mutiple Ransom BSOD but especially when playing "The Division"
Hi! I have been having multiple BSOD in the recent weeks, maybe over 10 or 12 by now. It happens randomly, I can be opening a folder, using Firefox or playing. This especially happens when playing "The division", in this case, it is almost guarantee...
BSOD Crashes and Debugging
Mutiple BSOD and Hanging 2
Hi all. BSODs is back with a vengeance and the system is still hanging and restarting. Attached are my files. Thanks. tayhwah
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:55.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums