Windows 10: Multiple crashes with multiple error codes & modules Solved

Page 1 of 4 123 ... LastLast

  1. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
       26 Mar 2017 #1

    Multiple crashes with multiple error codes & modules


    Hi there,

    For the past few months I've had fairly regular (usually at least one a day) BSOD on W10. Using WhoCrashed, it's shown that there's multiple modules causing a variety of different errors. I've uploaded my zip from the log collector but I'll also add the log from WhoCrashed.

    These crashes are completely random. I can leave my PC on with maybe Twitch open and I'll come back 5 minutes later and it'll have crashed. I can also be gaming and have the PC crash, likewise with simply just browsing the internet.
    I've checked all my RAM sticks and all RAM slots - I've booted the PC with just 1 RAM stick by itself (I tried every stick), and tried booting with a single RAM stick in every slot. I also ran the W10 Memory Diagnostic tool and it returned no errors.

    I've tried updating the drivers that WhoCrashed has identified - namely Nvidia Drivers using DDU and Realtek drivers. I've used not only DriverBooster to identify any outdated Drivers but also MSI's LiveUpdate 6. I've also reseated my GPU and refitted the power cables from my PSU. I've also done a completely fresh reinstall of Windows10 yet the crashes have persisted.

    I'm at my wits end here, hopefully somebody can help me. Thank you
    Last edited by Veilyn; 26 Mar 2017 at 10:54.
      My ComputerSystem Spec


  2. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       26 Mar 2017 #2

    Just had another crash -

    crash dump file: C:\Windows\Minidump\032617-6312-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x14E7C0)
    Bugcheck code: 0x50 (0xFFFF80826175E698, 0x0, 0xFFFFF801230B419F, 0x2)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that invalid system memory has been referenced.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
      My ComputerSystem Spec


  3. Posts : 13,319
    Windows 10 Pro
       26 Mar 2017 #3

    Remove DB4 and check MSI for LAN driver updates.
      My ComputersSystem Spec


  4. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       26 Mar 2017 #4

    I've uninstalled DB and I downloaded the new Realtek LAN driver from MSI. I uninstalled the older driver and reinstalled the new one.

    I'm about to run the W10 Driver Verifier and see if it identifies any issues.
      My ComputerSystem Spec


  5. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       26 Mar 2017 #5

    I enabled the Driver Verifier but it put my PC into an endless BSOD loop. I was able to boot into safe mode and disable it. In WhoCrashed the error reads -

    On Sun 26/03/2017 16:27:45 your computer crashed
    crash dump file: C:\Windows\Minidump\032617-4375-01.dmp
    This was probably caused by the following module: scpvbus.sys (ScpVBus+0xB174)
    Bugcheck code: 0xC9 (0x21F, 0xFFFFF80E73CFB174, 0xFFFFF6868E06EDC0, 0x0)
    Error: DRIVER_VERIFIER_IOMANAGER_VIOLATION
    file path: C:\Windows\system32\drivers\scpvbus.sys
    product: Scp Virtual Bus Driver
    company: Scarlet.Crush Productions
    description: Scp Virtual Bus Driver
    Bug check description: This is the bug check code for all Driver Verifier
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: scpvbus.sys (Scp Virtual Bus Driver, Scarlet.Crush Productions).
    Google query: Scarlet.Crush Productions DRIVER_VERIFIER_IOMANAGER_VIOLATION
      My ComputerSystem Spec


  6. Posts : 13,319
    Windows 10 Pro
       26 Mar 2017 #6

    Post a new zip by the DM Log Collector, more useful than those 'reports'.
      My ComputersSystem Spec


  7. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       26 Mar 2017 #7

    I've attached the new DM Log Collector results.
      My ComputerSystem Spec


  • Posts : 13,319
    Windows 10 Pro
       26 Mar 2017 #8

    Follow the instructions on Malwarebytes |

    Malwarebytes MB-clean tool
    to uninstall Malwarebytes, instructions are at the bottom of the page.
      My ComputersSystem Spec


  • Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       26 Mar 2017 #9

    I've uninstalled MB using the tool provided and rebooted. Was MB causing the BSODs?
      My ComputerSystem Spec


  • Posts : 13,319
    Windows 10 Pro
       26 Mar 2017 #10

    Many of them yes, we'll find out about the few others
      My ComputersSystem Spec


  •  
    Page 1 of 4 123 ... LastLast

    Related Threads
    Built a new computer around the start of this month (feb) and have been having intermittent BSOD's, ranging between 1 day and 1 week or so between. They don't seem to happen at any specific time or usage; having occured when the pc was idle...
    I completed a new PC build a couple weeks ago. Every time I turn the PC off for a few hours and come back and power it on 1 of 2 things happens. 1. The PC BSOD during the windows load before the log on screen 2. The PC BSOD at the log on or...
    Crashes mostly occur when gaming, but not a rule Hello guys, Here's a quick preview of the issues: 89238 First time here, I saw you are an active and helpful community so I decided to try my luck. I first ingored the BSODs, but it's...
    BSOD - Multiple error codes/bug checks in BSOD Crashes and Debugging
    Attached is my dmp file. This has been happening for months. I reformatted/upgraded my PC recently to Windows 10, which leads me to believe that it shouldn't be a driver issue (I assume it's probably a hardware issue) But I was hoping you guys could...
    Multiple BSOD error codes in BSOD Crashes and Debugging
    I updated from windows 7 the day that 10 launched and for a few days everything worked perfectly, then I crashed a few times, and today I crashed three times, all for different reasons. The first crash was a kernell_data_inpage_error. I did...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    © Designer Media Ltd
    All times are GMT -5. The time now is 17:25.
    Find Us