Windows 10: Multiple crashes with multiple error codes & modules Solved

Page 3 of 4 FirstFirst 1234 LastLast
  1.    08 Apr 2017 #21

    In the last dumpfile there are still drivers related to the Logitech device
    WmBEnum Tue Apr 27 22:10:19 2010
    WmXlCore Tue Apr 27 22:09:26 2010

    Also i found this driver
    NTIOLib_X64 Mon Nov 26 11:11:53 2012
    Driver Description: MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5, MSI Super Charger & MSI Smart Utilities.

    Recently (Nov 2014) there have been numerous instances of this driver in memory dumps. Analysis reveals that they are scattered throughout the filesystem by the installed MSI command utilities. For now I suggest uninstalling them all.
    Driver Update Site: http://event.msi.com/vga/afterburner/download.htm
    And in your unloaded module this one amifldrv64.sys
    Driver Description: MSI DPC Latency Tuner
    Driver Update Site: MSI Global

    I would uninstall/remove all MSI Utiliites from your system.
      My ComputerSystem Spec


  2. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       08 Apr 2017 #22

    Hm, I was sure I had uninstalled all the wingman devices. The only thing I can think of is that they're installed with the Logitech Gaming Software, which unfortunately I need to have installed as I have a G600 Mouse that doesn't work without the software.

    I did have MSI Command Center & Afterburner installed, so I've uninstalled them.


    What's the best way for me to get rid of the Wingman drivers? Would I have to find them in System 32 and remove/rename the .sys file?

    EDIT: There are no more unused Logitech devices shown in my Device Manager. There are two used ones, "Logitech Gaming Virtual Bus Enumerator" and "Logitech Virtual Bus Enumerator" but I would assume these are from/for the G600 mouse?

    EDIT2: When searching sys32 fo rWmBEnum & WmXlCore, it brings up two .sys files for each. I'm able to rename one but not the other and I can't delete any.
      My ComputerSystem Spec

  3. axe0's Avatar
    Posts : 13,610
    Windows 10 Pro
       08 Apr 2017 #23

    Reinstall the Logitech drivers/software for your mouse.


    Please (re)move some files to increase the free space to at least 15%.
    Every partition needs at least 10-15% free space so Windows can do its thing in the background, 15% is to be on the safe side.
    warning   Warning
    Less free space could cause BSODs or other problems, because Windows cannot perform the tasks it needs to do in the background!



    Download Intel Rapid drivers from MSI and install them, they are an older version but chances are they are more compatible with your system.


    Don't rename driver files out of nowhere, especially if you have software/hardware that may still use them!
      My ComputersSystem Spec


  4. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       08 Apr 2017 #24

    I booted into Safe Mode and was able to remove the two Wingman drivers aforementioned, and the Logitech mouse is still working. Doing a search for either driver comes up with no results, so it seems to have worked this time round.

    I've installed ver. 14.5.0.1081 of the Intel Rapid drivers from the drivers listed under my motherboard on MSI's website. I will go ahead and reinstall the mouse software though.

    EDIT: Reinstalled the mouse software, neither of the old drivers that were causing issues have returned.
      My ComputerSystem Spec


  5. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       09 Apr 2017 #25

    So I installed InputMapper to play Dark Souls, as I only have a DS4 controller. Today I had a BSOD in hidclass.sys and I found the ScP drivers that were causing me a BSOD before I removed them This leads me to believe that the Xinput wrapper is an issue, but I'm not aware of another way to use a DS4 controller on Windows unless a game natively supports it, which Dark Souls 3 does not.

    I've uploaded the log with the recent crash in it, just in case I'm wrong in thinking it's caused by InputMapper's drivers.

    Is there a better way to emulate an Xbox controller for the DS4 other than InputMapper that doesn't use the ScP drivers that give me blue screens?

    EDIT: Updated log, another crash - again with the DS4 controller plugged in.
    Last edited by Veilyn; 12 Apr 2017 at 09:01.
      My ComputerSystem Spec

  6. axe0's Avatar
    Posts : 13,610
    Windows 10 Pro
       14 Apr 2017 #26

    Tip, don't edit your posts after a few hours except for typos. We aren't notified of edits and will miss them if you don't make us aware of them.
      My ComputersSystem Spec

  7. axe0's Avatar
    Posts : 13,610
    Windows 10 Pro
       14 Apr 2017 #27

    We'll need more information of your system, stuff like the PSU and cooler cannot be retrieve from the logs.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

      My ComputersSystem Spec


  8. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       14 Apr 2017 #28

    Updated my system specs.
      My ComputerSystem Spec

  9. axe0's Avatar
    Posts : 13,610
    Windows 10 Pro
       15 Apr 2017 #29

    How old is your system?
    When was the last time it got cleaned of dust?
      My ComputersSystem Spec


  10. Posts : 21
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
    Thread Starter
       15 Apr 2017 #30

    Around a year old or so, give or take a couple of months for some parts. I think the PSU is a little older as my previous one died on me.

    I cleaned it a couple of weeks back, and it generally doesn't get very dusty due to the dust filters on the intake fans. I did take the side panel off yesterday, and found out that the PCI-E cables were incredibly loose - they practically fell out. I'm not sure if this helps at all but felt it might be worth mentioning.

    EDIT: Intake was pretty dusty, I've cleaned the dust off the filter and sprayed the insides with compressed air to dislodge any dust from the fan fins on the GPU & CPU Cooler.
    Last edited by Veilyn; 15 Apr 2017 at 05:54.
      My ComputerSystem Spec


 
Page 3 of 4 FirstFirst 1234 LastLast

Related Threads
Built a new computer around the start of this month (feb) and have been having intermittent BSOD's, ranging between 1 day and 1 week or so between. They don't seem to happen at any specific time or usage; having occured when the pc was idle...
I completed a new PC build a couple weeks ago. Every time I turn the PC off for a few hours and come back and power it on 1 of 2 things happens. 1. The PC BSOD during the windows load before the log on screen 2. The PC BSOD at the log on or...
Crashes mostly occur when gaming, but not a rule Hello guys, Here's a quick preview of the issues: 89238 First time here, I saw you are an active and helpful community so I decided to try my luck. I first ingored the BSODs, but it's...
BSOD - Multiple error codes/bug checks in BSOD Crashes and Debugging
Attached is my dmp file. This has been happening for months. I reformatted/upgraded my PC recently to Windows 10, which leads me to believe that it shouldn't be a driver issue (I assume it's probably a hardware issue) But I was hoping you guys could...
Multiple BSOD error codes in BSOD Crashes and Debugging
I updated from windows 7 the day that 10 launched and for a few days everything worked perfectly, then I crashed a few times, and today I crashed three times, all for different reasons. The first crash was a kernell_data_inpage_error. I did...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:02.
Find Us