1.    13 Mar 2017 #1
    Join Date : Mar 2017
    Posts : 3
    Windows 10 Pro

    BSOD Playing Guild Wars 2 x64 -> VIDEO_TDR_Failure -> atikmpag.sys


    Let me preface this by saying this only happens when I use Crossfire while playing GW2 and the BSOD does not show when I had my R9 290 in crossfire.

    Situation: In-game and running around, display will turn off. When it turns back on it has no image, just vertical lines of RBG pixles. Then display will turn off and on a few times leading to BSOD.

    BSOD error message: VIDEO_TDR_FAILURE Source: atikmpagsys

    Attached is the DM LOG File

    P.S. - I have already re-installed the video drivers after using DDU after uninstalling.(Did this 3 times)

    Edit: I really hope I did this correctly.
      My ComputerSystem Spec
  2.    14 Mar 2017 #2
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    0x116

    VIDEO_TDR_ERROR


    A VIDEO_TDR_ERROR always relates to the system's graphics card (TDR = Timeout Detection Recovery). This could be down to a number of reasons including drivers, heat, power to the card, a faulty PCI-e slot or simply a defective GPU. It's in your best interests to employ common sense trouble shooting techniques in these situations.



    • Try later and/or earlier drivers
    • Measure the GPU's temperatures at idle and under load
    • Ensure the GPU is free from dust build up and that the fan is working correctly
    • Reseat the GPU and check all connections are securely made
    • Check PSU voltages in BIOS
    • Try a different card in the system




    BSOD Playing Guild Wars 2 x64 -> VIDEO_TDR_Failure -> atikmpag.sys Diagnostic Test BSOD Playing Guild Wars 2 x64 -> VIDEO_TDR_Failure -> atikmpag.sys
     GPU TEST

    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
      My ComputerSystem Spec
  3.    14 Mar 2017 #3
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    When NZXT installed before Bluescreens u should check if theres any GPU overclocking activated. After that u shouls remove this tool, its known for causing Bluescreens.

    U should also check your RAM configuration. The actual frequency does not match with the memory bar frequency. Maybe something was changed in the BIOS?:

    Code:
    [Memory Device (Type 17) - Length 40 - Handle 0014h]
      Size                          8192MB
      Speed                         3200MHz
      Manufacturer                  0420
      Part Number                   F4-3000C15-8GTZB    
    [Memory Device (Type 17) - Length 40 - Handle 0016h]
      Size                          8192MB
      Speed                         3200MHz
      Manufacturer                  0420
      Part Number                   F4-3000C15-8GTZB
      My ComputerSystem Spec
  4.    14 Mar 2017 #4
    Join Date : Mar 2017
    Posts : 3
    Windows 10 Pro
    Thread Starter

    Quote Originally Posted by BSODHunter View Post
    When NZXT installed before Bluescreens u should check if theres any GPU overclocking activated. After that u shouls remove this tool, its known for causing Bluescreens.

    U should also check your RAM configuration. The actual frequency does not match with the memory bar frequency. Maybe something was changed in the BIOS?:

    Code:
    [Memory Device (Type 17) - Length 40 - Handle 0014h]
      Size                          8192MB
      Speed                         3200MHz
      Manufacturer                  0420
      Part Number                   F4-3000C15-8GTZB    
    [Memory Device (Type 17) - Length 40 - Handle 0016h]
      Size                          8192MB
      Speed                         3200MHz
      Manufacturer                  0420
      Part Number                   F4-3000C15-8GTZB
    I do not understand this "NZXT installed before Bluescreens" although the GPUs are manually overclocked by me using WATTMAN.

    The frequency of RAM was overclocked by me in BIOS.

    I will double check the seating of the GPU in the PCI slots, although the BSOD only happens in Guild Wars 2 and not in CIV 6 or other graphic intensive games.
      My ComputerSystem Spec
  5.    14 Mar 2017 #5
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Overclocking is one of the most common cause of bluescreens. This Forum is only for stock running Systems. Please refere for an overclocking forum for further help. I bet when u remove all OC the BSODs will dissapear.

    See here:
    Common BSOD Error Code List for Overclocking - Overclock.net Community

    0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
      My ComputerSystem Spec
  6.    16 Mar 2017 #6
    Join Date : Mar 2017
    Posts : 3
    Windows 10 Pro
    Thread Starter

    Thank you, I'll mark this as solved.
      My ComputerSystem Spec
  7.    17 Mar 2017 #7
    Join Date : Jan 2017
    Karlsruhe
    Posts : 733
    Windows 10 Pro

    Glad I could help u
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
BSOD VIDEO_TDR_FAILURE atikmpag.sys // and // Horizontal lines
My Laptop Dell Inspiron N14r (N4010) nearly 5 year old, 3gb RAM , i3 first gen. ATI mobility Radeon HD 4650 1gb graphic card Screen is showing this BSOD VIDEO_TDR_FAILURE atikmpag.sys while loading windows 10. Also horizonal lines shows up and...
BSOD Crashes and Debugging
BSOD DPC_WATCHDOG_VIOLATION playing Guild Wars 2
Hey guys, sometimes while playing Guild Wars 2 i experience a sudden freeze. It is impossible to open the task manager or anything else. Shortly after that, the BSOD appears. I add the diagnostic information and hope you can help me! If you...
BSOD Crashes and Debugging
BSOD at random times in Guild Wars 2 [0x0124]
Hi, I have never had any BSOD related problems on my computer until I "opted" to upgrade from Windows 8,1 to Windows 10. Since then I have been getting what seem to be random crashes always when running Guild Wars 2. This does not occur under any...
BSOD Crashes and Debugging
windows 10 - video_tdr_failure (atikmpag.sys)
I've upgraded my laptop from W7 to W10 and after that I always get this error "Display driver stopped responding and has recovered", my laptop freezes for a few seconds. And then last week it hangs but didn't recovered as it always been doing. It...
BSOD Crashes and Debugging
BSODs when using integrated graphics to play Guild Wars 2
Hey everyone! I've been having a lot of problems playing online games with my integrated graphics. I get really low fps if I try to play using my dedicated graphics card. It gets to the point where the games are unplayable which is why I switched...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:44.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums