Windows 10: Another day, another Stop Code

Page 1 of 3 123 LastLast
  1.    26 Feb 2017 #1

    Another day, another Stop Code

    BSOD's everyday either in Chrome or Rise of the Tomb Raider. Not sure what part is causing the problem.

    Removing the 780 Ti GFX card still repro's the problem. Ran Windows 10 memory tester once, no problems.

    My build:
    cpu: i7-6700K
    gpu: asus GTX 780 Ti
    ram: 2x4GB GeIL ddr4-2133
    mobo: gigabyte GA-B150M-DS3H
    ssd: SAMSUNG 960 EVO M.2 500GB NVMe

    attached report is with GFX card removed, relying on Intel HD 530 (which still crashes)

    Attachment 122868

    Also recently reinstalled Windows 10. Crashes before and after.
      My ComputerSystem Spec

  2.    26 Feb 2017 #2

    The dumpfile is
    BugCheck 12B, {ffffffffc00002c4, 6af, 3521d40, ffffaa802ec02000}
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    Probably caused by : memory_corruption
    Followup: memory_corruption
    6: kd> !analyze -v
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    This bugcheck indicates that a single bit error was found in this page.  This is a hardware memory error.
    Arg1: ffffffffc00002c4, virtual address mapping the corrupted page
    Arg2: 00000000000006af, physical page number
    Arg3: 0000000003521d40, zero
    Arg4: ffffaa802ec02000, zero
    This probably points to faulty memory modules.
    Please start with diagnosing the system RAM first. You can use the free tool "Memtest86+" to stress test the RAM.

    How to run "Memtest"
    MemTest86+ - Test RAM - Windows 10 Tutorials
    Make sure you are using the latest version 5.01 - Memtest86+ - Advanced Memory Diagnostic Tool

    You can stop the test even if a single error is found during the test. Otherwise continue the test for 8-10 passes and post a screenshot with next reply. 8 passes is the recommended bare minimum but more passes will give better result.
      My ComputerSystem Spec

  3.    26 Feb 2017 #3

    9 Passes, no errors: Shared album - Google Photos
      My ComputerSystem Spec

  4.    26 Feb 2017 #4

    another crash Attachment 122951
      My ComputerSystem Spec

  5.    27 Feb 2017 #5

    The last dumpfile is
    BugCheck 19, {e, ffffc68a20058000, 2319abae722dd9a2, af19abae722dd9a2}
    *** WARNING: Unable to verify timestamp for win32kfull.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32kfull.sys
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+b9d )
    Followup: Pool_corruption
    2: kd> !analyze -v
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    The pool is already corrupt at the time of the current request.
    This may or may not be due to the caller.
    The internal pool links must be walked to figure out a possible cause of
    the problem, and then special pool applied to the suspect tags or the driver
    verifier to a suspect driver.
    Arg1: 000000000000000e, 
    Arg2: ffffc68a20058000
    Arg3: 2319abae722dd9a2
    Arg4: af19abae722dd9a2
    I only found 2 older drivers in your driver module, check if these are the latest versions avaliable or update them from your mobo supportpage GA-B150M-DS3H (rev. 1.0) - GIGABYTE - Motherboard , Graphics Card , Laptop , Mini-PC , Server , PC Peripherals and more

    iwdbus Fri Nov 06 00:10:07 2015
    Driver Description: Intel WIDI Bus Enumerator driver
    Related to Intel Widi - Wireless Display
    Driver Update Site: Search downloads

    TeeDriverW8x64 Mon Aug 31 21:49:07 2015
    Driver Description: Intel Management Engine Interface (MEI) driver
    Driver Update Site: OEM or Drivers & Software
    Installation instructions - Windows 10 Error 0x800f081f -Source file not found

    Advice: check for all the drivers if you have the latest version installed from the mobo supportpage.

    If above does not stop the BSOD.

    You can use Driver Verifier.
    You can enable "Driver Verifier" according to instructions from the below link.
    Driver Verifier - Enable and Disable in Windows 10 - Windows 10 Tutorials
    "Verifier" is a Microsoft's own tool to stress test third party drivers and find the buggy one. If it detects a violation, a blue screen will be created immediately and the dump will give us the name of offending driver straight forward. After enabling "Verifier" , system will be a bit slow and laggy during to the background verification process. After you got two or more blue screens, please upload the new crash dumps and we will know whether the issue is caused by third party drivers or low level hardware (a verifier enabled dump which blames Windows system files is a clear confirmation of hardware problem).
    "Verifier" should be only used to monitor third party drivers. Selecting Microsoft system drivers is totally unnecessary and doing so may make the system non bootable.
      My ComputerSystem Spec

  6.    28 Feb 2017 #6

    thanks for the info for the drivers, I will try to find them. In the meantime, I enabled driver verifier for non MS drivers, and got another crash. Attachment 123072
      My ComputerSystem Spec

  7.    28 Feb 2017 #7

    I have installed the Intel Management Engine Interface from GA-B150M-DS3H (rev. 1.0) - GIGABYTE - Motherboard , Graphics Card , Laptop , Mini-PC , Server , PC Peripherals and more. Let's see if that helps.
      My ComputerSystem Spec

  8.    28 Feb 2017 #8

    The latest dumpfile again is memory related. This time bugcheck 1A Memory Management
        # Any other values for parameter 1 must be individually examined.
    Arg1: 0000000000041792, A corrupt PTE has been detected. Parameter 2 contains the address of
    	the PTE. Parameters 3/4 contain the low/high parts of the PTE.
    Arg2: ffffb9016209e000
    Arg3: c800000000000000
    Arg4: 0000000000000000
    Is your memory running with the right specifications ( CAS,voltage etc.), check this in your BIOS?
    Your memory is not listed on the QVL list. You could ask Gigabyte support if this memory is compatible with your mobo.
      My ComputerSystem Spec

  9.    28 Feb 2017 #9

    Well neither my RAM nor M.2 ssd are listed as supported by the Mobo:

    * GeIL EVO FORZA DC 8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Desktop Memory Model GFY48GB2133C15DC GeIL EVO FORZA DC 8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4 17000) Desktop Memory Model GFY48GB2133C15DC -
    * SAMSUNG 960 EVO M.2 500GB NVMe PCI-Express 3.0 x4 Internal Solid State Drive (SSD) MZ-V6E500BW SAMSUNG 960 EVO M.2 500GB NVMe PCI-Express 3.0 x4 Internal Solid State Drive (SSD) MZ-V6E500BW -

    From the mobo's memory support list: GA-B150M-DS3H (rev. 1.0) - GIGABYTE - Motherboard , Graphics Card , Laptop , Mini-PC , Server , PC Peripherals and more

    I think memtest has ruled out issues with the RAM. Mobo is rated for DDR4 2133 which the RAM is.

    A corrupt page table entry is problematic; corrupted page tables will manifest in all kinds of weird bugs. Honestly, I think that paging out to disk is messed up.
      My ComputerSystem Spec

  10.    28 Feb 2017 #10

    Also, RAM timings for GFY48GB2133C15DC are 15-15-15-36 @ 1.2V according to: DDR4 FORZA DUAL CHANNEL - Products - GeIL Memory. Rebooting to check now.
      My ComputerSystem Spec

Page 1 of 3 123 LastLast

Related Threads
Solved Stop Code VIDEO_TDR_FAILURE atikmpag.sys in BSOD Crashes and Debugging
Okay so over the past few weeks my computer has been randomly blue screening while playing games and on the initial Windows startup and most times I get the stop code VIDEO_TDR_FAILURE atikmpag.sys. Other times I would just get a black screen or...
Solved Glitched Blue Screen on Boot(No Stop Code) in BSOD Crashes and Debugging
Okay so today when taking a look at my family PC I noticed that it had restarted and was at the Windows recovery screen, that screen you get after a few failed boots. I tried to boot the system into Windows but it just blue screened, this blue...
I recently bought a 1070 card 4 months ago and installed it. A few weeks later, prior to the new installation of the GPU, windows did an update and few hours prior to that update, I got a BSoD. Afterwords, I soon kept getting random BSoD from either...
BSOD - Stop Code: DRIVER_POWER_STATE_FAILURE in BSOD Crashes and Debugging
I don't know where to begin. Laptop was working fine again for last week or so after last BSOD issue that Axe0 helpled me with. I re-installed the WAN Wireless driver & Intel Chipset drivers that i was instructed to do and seemed to be working...
Solved Stop Tracing Code in Browsers and Email
Today attempting to start Edge the screen would open half size then load Outlook then return to MSN. When I tried to widen the screen it recycled to Edge then close Edge. After 2-3 times I get a message that says " go to MSN for stop tracing code "...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:23.
Find Us