Windows 10: BSOD ntoskrnl faulty hardware or?

  1.    20 Feb 2017 #1

    BSOD ntoskrnl faulty hardware or?

    I am really out of ideas with these BSOD's. Seems like the error is always the same. Still It does not happen often but usually it happens on some heavy load.


    I would really appreciate if anyone has some idea which could cause I still cannot figure out is it hardware or software error. my pc passed windows memory test and some other test. I'll try memtest this night. I did try it once but it passed everything fine at the time.

    Thanks a lot!

    Attachment 122295

    Report updated with new files
    Last edited by moth3r; 21 Feb 2017 at 17:46.
      My ComputerSystem Spec

  2. axe0's Avatar
    Posts : 13,610
    Windows 10 Pro
       21 Feb 2017 #2


    Please run the DM Log Collector and wait for the command prompt to finish.
      My ComputersSystem Spec

  3.    21 Feb 2017 #3

    chooky87 said: View Post
    I'm having the same issues. It started 2 days ago, computer is crashing randomly with different BSOD errors. I've tried a new SSD, new RAM and multiple fresh installs of Windows 10. I've run out of ideas, I'm starting to think there is a seriously nasty virus or Microsoft have released an driver update which has screwed something.

    Attachment 122220
    Good to know even though I think my BSOD error is mostly the same.
      My ComputerSystem Spec

  4.    21 Feb 2017 #4

    axe0 said: View Post
    Please run the DM Log Collector and wait for the command prompt to finish.
    I though something was wrong with it considering it was still running after a couple of hours. I'll try again then. Thanks for the reply!
      My ComputerSystem Spec

  5.    21 Feb 2017 #5

    This is a new report. These files should be now in order.

    Attachment 122296
      My ComputerSystem Spec

  6. axe0's Avatar
    Posts : 13,610
    Windows 10 Pro
       21 Feb 2017 #6

    BSOD ntoskrnl faulty hardware or? Diagnostic Test BSOD ntoskrnl faulty hardware or?

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Make a photo of the result and post it.

    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.

    BSOD ntoskrnl faulty hardware or? Diagnostics Test BSOD ntoskrnl faulty hardware or?

    Note   Note
    Please run HDTune first, in the order posted!

    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run the long test.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Make a photo of the result and post it.

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Use option TWO with parameter /r
    Upload the chkdsk log
      My ComputersSystem Spec


Related Threads
I am having bsod problems and the problem of the bsod is FAULTY HARDWARE CORRUPTED PAGE. I did a restore factory settings from the windows 10 options like 1 month ago. After I got the bsod , I ran a malwarebytes full scan and no threats detected. So...
BSOD randomly happens once or twice per day. I updated all the drivers with Driver Booster program, even updated the BIOS. I did the Windows Memory Diagnostic and passed the test. Throws different errors but seems the culprit is always the same. I...
I have recently upgraded my RAM from 4BG to 8 and have no been getting the BSOD for the first time ever. They are never the same... I've had the IRQL_NOT_LESS_OR_EQUAL and the UNEXPECTED_KERNEL_MODE errors. I am not so computer-savvy that I...
Good day, I have had these 2 BSODs in the past few days on a fresh Windows 10 Pro install (not upgraded from 8.1). Attached are the dump files and they also happened while I was using Chrome. Hope there's a fix for this as it doesn't make sense...
Hello. Eh getting weird problem with Windows 10 Pro. So few days ago when i ran memtest few hours without error, but after finished test i reboot pc and Automatiic repair started before windows. Is this something with memory ? Memory...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:19.
Find Us