BSOD ntoskrnl faulty hardware or?

I am really out of ideas with these BSOD's. Seems like the error is always the same. Still It does not happen often but usually it happens on some heavy load.

ntoskrnl - FAULTY_HARDWARE_CORRUPTED_PAGE

I would really appreciate if anyone has some idea which could cause I still cannot figure out is it hardware or software error. my pc passed windows memory test and some other test. I'll try memtest this night. I did try it once but it passed everything fine at the time.

Thanks a lot!

Attachment 122295

Report updated with new files

@moth3r,

Please run the DM Log Collector and wait for the command prompt to finish.

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

Diagnostics Test

 HDD TEST

   Note

Please run HDTune first, in the order posted!

Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.

   Note

Do not run SeaTools on an SSD as the results will be invalid.

Make a photo of the result and post it.

Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log https://www.sevenforums.com/tutorial...iewer-log.html