Hii TheKeyofFMinor,
Please make sure that the default options are loaded in the BIOS and perform below tests.
Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums
Note
If you're overclocking anything, please stop it and set everything back to default while troubleshooting
Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the results and post them.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for
at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for
zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
Diagnostics Test
HDD TEST
Note
Please run HDTune first, in the order posted!
Run HDTune to
- check the health,
- scan for errors, no quick scan but full scan
- run a benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
- the health,
- the error scan,
- the benchmark incl. following
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.
Note
Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.
Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log http://www.sevenforums.com/tutorials...iewer-log.html
Run Furmark to test your GPU. Furmark tutorial
Note
Run Furmark for around 30 minutes
Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high
When finished, make a photo/screenshot of Furmark and post it.
In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor
- the frequency of the GPU,
- the GPU memory clock,
- the temperature,
- the power,
- the load on the GPU,
- Etc.
I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.
Please fill in your system specsPlease follow
this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
Code:
3: kd> .cxr 0xffff96815db60f90
rax=ffffc50f020800c8 rbx=0000000000000000 rcx=ff7fc50f0048dde0
rdx=ffffc50f020800c8 rsi=ffffc50f0048de30 rdi=ffffc50f020800c0
rip=fffff8002e59103a rsp=ffff96815db619a0 rbp=0000000000000000
r8=0000000000000000 r9=ffff96815db61a24 r10=ffffc50f04049080
r11=0000000000000001 r12=00000086528ff200 r13=0000000000000100
r14=ffffc50f020800b0 r15=ffffaa04d1e60d30
iopl=0 nv up ei ng nz ac pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010293
nt!EtwpReceiveNotification+0xbe:
fffff800`2e59103a 48397108 cmp qword ptr [rcx+8],rsi ds:002b:ff7fc50f`0048dde8=????????????????
3: kd> .formats fffff8002e59103a; .formats ff7fc50f0048dde0
Evaluate expression:
Hex: fffff800`2e59103a
Decimal: -8795315433414
Octal: 1777777600005626210072
Binary: 11111111 11111111 11111000 00000000 00101110 01011001 00010000 00111010
Chars: .....Y.:
Time: ***** Invalid FILETIME
Float: low 4.93545e-011 high -1.#QNAN
Double: -1.#QNAN
Evaluate expression:
Hex: ff7fc50f`0048dde0
Decimal: -36093603775717920
Octal: 1775776120740022156740
Binary: 11111111 01111111 11000101 00001111 00000000 01001000 11011101 11100000
Chars: ....H..
Time: ***** Invalid FILETIME
Float: low 6.69175e-039 high -3.39976e+038
Double: -1.39434e+306