1.    14 Feb 2017 #1
    Join Date : Mar 2016
    Posts : 11
    Windows 10

    BSOD within 5 minutes of waking up Windows from sleep

    I get a BSOD whenever I come back to my computer and wake it up. But if I haven't let the computer go to sleep it keeps going as long as I have been able to observe. The BSOD message/error code isn't consistent.

    Note: Video drivers are tricky cause AMD stopped supporting my card as far as I know, so it always alternates between the recommended 15.301.1901 and the 16.50.2011 (Beta). Checked just now and it's on the 15 and wants to update to 16.50.2011. Doing that right now.

    Attachment 121206
      My ComputerSystem Spec
  2.    15 Feb 2017 #2
    Join Date : Jun 2015
    Posts : 13,036
    Windows 10 Pro

    Hii TheKeyofFMinor,

    Please make sure that the default options are loaded in the BIOS and perform below tests.

    BSOD within 5 minutes of waking up Windows from sleep Diagnostic Test BSOD within 5 minutes of waking up Windows from sleep

    Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

    Note   Note
    If you're overclocking anything, please stop it and set everything back to default while troubleshooting

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

    Make a photo of the results and post them.

    BSOD within 5 minutes of waking up Windows from sleep Diagnostic Test BSOD within 5 minutes of waking up Windows from sleep

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    Make a photo of the result and post it.

    If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
    If errors show up and you see them a lot later, no problem, the errors don't affect the test.

    BSOD within 5 minutes of waking up Windows from sleep Diagnostics Test BSOD within 5 minutes of waking up Windows from sleep

    Note   Note
    Please run HDTune first, in the order posted!

    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run the long test.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.

    Make a photo of the result and post it.

    Run chkdsk
    Disk Check - Windows 7 Help Forums
    Use option TWO with parameter /r
    Upload the chkdsk log http://www.sevenforums.com/tutorials...iewer-log.html

    BSOD within 5 minutes of waking up Windows from sleep Diagnostic test BSOD within 5 minutes of waking up Windows from sleep

    Run Furmark to test your GPU. Furmark tutorial

    Note   Note
    Run Furmark for around 30 minutes

    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

    When finished, make a photo/screenshot of Furmark and post it.

    In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor
    • the frequency of the GPU,
    • the GPU memory clock,
    • the temperature,
    • the power,
    • the load on the GPU,
    • Etc.

    I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

    3: kd> .cxr 0xffff96815db60f90
    rax=ffffc50f020800c8 rbx=0000000000000000 rcx=ff7fc50f0048dde0
    rdx=ffffc50f020800c8 rsi=ffffc50f0048de30 rdi=ffffc50f020800c0
    rip=fffff8002e59103a rsp=ffff96815db619a0 rbp=0000000000000000
     r8=0000000000000000  r9=ffff96815db61a24 r10=ffffc50f04049080
    r11=0000000000000001 r12=00000086528ff200 r13=0000000000000100
    r14=ffffc50f020800b0 r15=ffffaa04d1e60d30
    iopl=0         nv up ei ng nz ac pe cy
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010293
    fffff800`2e59103a 48397108        cmp     qword ptr [rcx+8],rsi ds:002b:ff7fc50f`0048dde8=????????????????
    3: kd> .formats fffff8002e59103a; .formats ff7fc50f0048dde0
    Evaluate expression:
      Hex:     fffff800`2e59103a
      Decimal: -8795315433414
      Octal:   1777777600005626210072
      Binary:  11111111 11111111 11111000 00000000 00101110 01011001 00010000 00111010
      Chars:   .....Y.:
      Time:    ***** Invalid FILETIME
      Float:   low 4.93545e-011 high -1.#QNAN
      Double:  -1.#QNAN
    Evaluate expression:
      Hex:     ff7fc50f`0048dde0
      Decimal: -36093603775717920
      Octal:   1775776120740022156740
      Binary:  11111111 01111111 11000101 00001111 00000000 01001000 11011101 11100000
      Chars:   ....H..
      Time:    ***** Invalid FILETIME
      Float:   low 6.69175e-039 high -3.39976e+038
      Double:  -1.39434e+306
      My ComputersSystem Spec


Similar Threads
Thread Forum
Bsod after few minutes of sleep
Hello people my pc goes off when i want to sleep it first the monitor turn off but other hardware working till few minutes. it worked fine till last two days this is my first topic about this problem ...
BSOD Crashes and Debugging
Computer keeps waking from sleep within 2 minutes every single time
I need help bad. I have searched the forums and online and have tried everything under the sun that has been suggested but my computer simply will not stay sleeping. It promptly wakes up within 2 minutes. I tried hibernating it and it still wakes...
Performance & Maintenance
Solved BSOD When Waking from Sleep
Just built a new computer. All of the drives and the Windows installation is the same as in the old system. I don't know if the issue would have occurred in the old system as I never tried to put my computer to sleep. I was getting one BSOD when...
BSOD Crashes and Debugging
BSOD when waking windows from sleep
Hi, a few days ago I updated my 64 bit windows 7 ultimate to windows 10 pro, and ever since then whenever I put the PC to sleep and try to wake it the PC tries to start but the screen remains black and after a while a BSOD will appear (now with a...
BSOD Crashes and Debugging
Solved BSOD after waking from sleep
Hey guys, i am stumped on this one, every time i have put my computer to sleep after waking it it will show my pin to type in but it freezes there and the bsod after about 5secs, i have done a memtest and that passed, but yeah no idea. hopefully...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 06:59.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App

Windows 10 Forums