Windows 10: YUMI and BSOD no help from YUMI

  1.    07 Feb 2017 #1

    YUMI and BSOD no help from YUMI


    I recently had a BSOD issue in Windows10. A while ago I created a YUMI thumb drive, assuming when I boot into the thumb drive I would be presented with what rescue disc I had installed on the thumb drive which I wanted to boot into.

    Instead when the thumb drive loaded, there was no YUMI menu, nothing. I did solve my BSOD issue; but I was informed it is easy to setup YUMI. If it is easy and I followed instructions to which I read, why didn't a YUMI menu load when booting from the thumb drive ? Since then I've erased the thumb drive and so I write this post hoping someone with YUMI experience can help.
      My ComputerSystem Spec

  2.    07 Feb 2017 #2

    Attention:

    Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

    If you need to add new information, please make a new post in your initial BSOD thread. Please do not make an extra new thread.
      My ComputerSystem Spec

  3.    08 Feb 2017 #3

    It formally was a BSOD issue, as I mentioned that is no longer relevant. Back to the question at hand.
      My ComputerSystem Spec


  4. Posts : 5,345
    Windows 10 Pro X64 16299.19
       09 Feb 2017 #4

    I don't know why YUMI didn't boot but I have a suggestion that should make that a moot point. Instead, use Kyhi's WinPE Rescue disk. I think it's the best rescue tool around. Boots Windows 10 and has a bunch of tools to resolve many of the problems you run into.

    See here: Windows 10 Recovery Tools - Bootable Rescue Disk from KYHI

    As for YUMI, is your PC a UEFI system or an older BIOS system. If UEFI, then the flash driuve has to be UEFI bootable or you need to set CSM (compatibility) mode in the UEFI setup then you should be able to boot YUMI.

    I couldn't find one, but maybe there is a forum where YUMI is discussed, somewhere on the pENDRIVElINUX SITE PERHAPS?
      My ComputersSystem Spec

  5.    11 Feb 2017 #5

    Ztruker said: View Post
    I don't know why YUMI didn't boot but I have a suggestion that should make that a moot point. Instead, use Kyhi's WinPE Rescue disk. I think it's the best rescue tool around. Boots Windows 10 and has a bunch of tools to resolve many of the problems you run into.

    See here: Windows 10 Recovery Tools - Bootable Rescue Disk from KYHI

    As for YUMI, is your PC a UEFI system or an older BIOS system. If UEFI, then the flash driuve has to be UEFI bootable or you need to set CSM (compatibility) mode in the UEFI setup then you should be able to boot YUMI.

    I couldn't find one, but maybe there is a forum where YUMI is discussed, somewhere on the pENDRIVElINUX SITE PERHAPS?
    Kyhi's WinPE Rescue Disk doesn't allow me to add custom rescue discs from Backup rescue software on a per machine basis which is what I originally had setup, or so I thought I had setup with YUMI. I think I did have YUMI formatted to UEFI but I'll try again and attempt to book into a multi-YUMI menu; and the PenDriveLinux site doesn't have a forum
      My ComputerSystem Spec


  6. Posts : 5,345
    Windows 10 Pro X64 16299.19
       11 Feb 2017 #6

    Kyhi's WinPE Rescue Disk doesn't allow me to add custom rescue discs from Backup rescue software on a per machine basis
    Don't understand what you mean by the above. Do you mean the actual disc image or the software to restore with or what?
    Does your requirement have to support Linux software?

    Kyhi's disc comes with Macrium Reflect Free which works for me for both backup and recovery.

    As you can tell, I'm a bit confused here, but that's normal for me any more
      My ComputersSystem Spec

  7.    11 Feb 2017 #7

    Kyhi's WinPE Rescue Disk doesn't allow me to add custom rescue discs from Backup rescue software on a per machine basis


    Don't understand what you mean by the above.

    Do you mean the actual disc image or the software to restore with or what?
    Does your requirement have to support Linux software?
    You know that with backup software such as Macrium you can create rescue discs on a per machine basis, and the current version of Macrium is not the same as the previous version of Macrium. Those rescue discs which you can create
    per computer / machine I want to have the option of choosing when booting into the flash drive and from the looks of it Kyhi's WinPE Rescue Disc doesn't give me that option ?
      My ComputerSystem Spec


  8. Posts : 5,345
    Windows 10 Pro X64 16299.19
       12 Feb 2017 #8

    Okay, I think I understand though I don't see the point since a standard Macrium Reflect recuse disc works on any computer I've tried it on, though I have had to turn CSM on some times.

    Hopefully you can get YUMI to boot.
      My ComputersSystem Spec


 

Related Threads
Hello, So first of all, I am not a computer wizard. Some terms I might not understand as i've never had a problem like this before, but i'll try to enlist as much information as possible. Since last friday or so, i've suddenly encountered a...
YUMI Multiboot USB Setup Question in Installation and Upgrade
Has anyone had success with the YUMI Multiboot tool to setup a USB with multiple ISO images? I set one up on a few different USB drives and each time i do it, it lists all ISO images to install but no matter what, it only loads and installs the...
Hi, Yumi has performed his works and arranged a multiboot USB Stick. After Rebbot and start from USB Stick all three Windows types ( 32Bit Home, 64 Bit home and 64 Bit PRo) were available. But on Stick there is only 3 GB used for Windows. In...
Hello, so i think i have dealt with this bluescreen 3times now, and it seemed to have gone away after i went from my amd system to intel. But now its there again. The most useful function ever, wake from sleep, is now bluescreening my computer. I...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:51.
Find Us