BSOD during times of inactivity.

Hi All,
New member here hoping someone can help with my persistent BSOD issues.

I've been getting BSOD's with my new Lenovo P510 Windows 10 Workstation. They seem to happen during a time when there's no user activity. I've seen the system restart because of BSOD's minutes after I lock the desktop and sometime hours after I've locked the desktop. I've never seen a BSOD while I was actively using the PC.

The cause reported by BlueScreenView in the past few BSOD's is driver e1d65x64.sys.

I've updated all drivers to the latest available from Lenovo and NVIDIA.
I did reinstall the Video Drivers using DDU

Any help would be appreciated,
KelleySp

Different Codes but most of them are caused by nvlddmkm.sys. If this is the newest driver (yours dated 11.12.2016) there could be problems with temperature too. An defective video card could be the cause too.

Some analysis examples from your dumps:

0x00000133: DPC_WATCHDOG_VIOLATION (5.01.2017 02:12:52) [Windows 10]
CAUSED BY: nvlddmkm.sys [11.12.2016] * nVidia Video drivers

0x1000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (18.11.2016 00:56:25) [Windows 10]
CAUSED BY: nvlddmkm.sys [1.08.2016] * nVidia Video drivers

Description: This is a very common bugcheck. Usually the exception address pinpointsthe driver/function that caused the problem.



0x00000116: VIDEO_TDR_FAILURE (6.01.2017 17:57:51) [Windows 10]
CAUSED BY: nvlddmkm.sys [11.12.2016] * nVidia Video drivers

Usual causes: Video driver, overheating, bad video card, ?BIOS, ?Power to card (see Significant Posts section below)

Description:
A common stability problem in graphics occurs when the system appears completely frozen or hung while processing an end-user command or operation.You may need to install the latest updates for your display driver, so that it properly supports the TDR process.Hardware issues that impact the ability of the video card to operate properly, including:
- Over-clocked components, such as the motherboard
- Incorrect component compatibility and settings (especially memory configuration and timings)
- Insufficient system cooling
- Insufficient system power
- Defective parts (memory modules, motherboards, etc.)Visual effects, or too many programs running in the background may be slowing your PC down so that the video card can not respond as necessary.

U can test your GPU Performance & Temperature via FurMark:

FurMark - GPU Stress Test


UPDATE:

BSODs occur at IDLE I see. Maybe there is an Problem with "hibernate" or your Performance Plan too. Just for testing try to disable it:

Hibernate - Enable or Disable in Windows 10

You can set up your machine to high performance (hibernate & fastboot disabled) with this commands for cmd too (elevated):

Code:

powercfg -restoredefaultschemes
powercfg -setactive SCHEME_MIN
powercfg -x -monitor-timeout-ac 0
powercfg -x -monitor-timeout-dc 0
powercfg -x -disk-timeout-ac 0
powercfg -x -disk-timeout-dc 0
powercfg -x -standby-timeout-ac 0
powercfg -x -standby-timeout-dc 0
powercfg -x -hibernate-timeout-ac 0
powercfg -x -hibernate-timeout-dc 0
powercfg -hibernate off

Update: I ran the powercfg commands and have not had a BSOD since. Thanks for the help BSODHunter.