BSOD every time i boot my PC IRQL_NOT_LESS_OR_EQUAL


  1. Posts : 4
    Windows 10 Home
       26 Jan 2017 #1

    BSOD every time i boot my PC IRQL_NOT_LESS_OR_EQUAL


    Every time i turn on my Laptop, the computer throws a BSOD and then boots properly.

    Things i have done so far:
    - CMD Sfc /Scannow looking for any corrupted file.
    - Update all my drivers (using Driver Booster)
    - Update Windows (Windows update)
    - System restore





    Attachment 118628
    Last edited by Noxido; 26 Jan 2017 at 19:11.
      My ComputerSystem Spec

  2.    26 Jan 2017 #2

    I know you said you updated the drivers via 'driver booster', but uninstall the graphics drivers and reboot, then update them manually from the graphics OEM site specifically. IME, between that and SFC scan, usually resolves it.
      My ComputerSystem Spec


  3. Posts : 4
    Windows 10 Home
    Thread Starter
       26 Jan 2017 #3

    Reinstalled my GPU drivers using Display Drivers Unistaller (Safe Mode) + SFC Scan
    sadly didn't work .
      My ComputerSystem Spec

  4. Ztruker's Avatar
    Posts : 6,601
    Windows 10 Pro X64 1809 17763.134
       26 Jan 2017 #4

    The 1/25 3:21AM dump shows this error:
    Code:
    ffffdc80`4271a048  fffff806`37b57818*** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
     iaStorA+0x187818
    This belongs to the Intel RST (Rapid Storage Technology) driver. The one you have is dated 7/27/2015. There is a newer driver available from Intel here:
    Downloads for Intel® Rapid Storage Technology (Intel® RST)

    Attachment 118632
      My ComputersSystem Spec


  5. Posts : 4
    Windows 10 Home
    Thread Starter
       26 Jan 2017 #5

    Ztruker said: View Post
    The 1/25 3:21AM dump shows this error:
    Code:
    ffffdc80`4271a048  fffff806`37b57818*** WARNING: Unable to verify timestamp for iaStorA.sys
    *** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
     iaStorA+0x187818
    This belongs to the Intel RST (Rapid Storage Technology) driver. The one you have is dated 7/27/2015. There is a newer driver available from Intel here:
    Downloads for Intel® Rapid Storage Technology (Intel® RST)

    Attachment 118632
    Thanks, before posting this thread, i updated all my drivers (including Intel RST iAstorA.Sys), but the problem still persist..
      My ComputerSystem Spec

  6.    27 Jan 2017 #6

    From my post, keyword: manually. As in, don't use the booster or 'display drivers uninstaller'. Download and save the most current driver for the graphics card from the OEM site, uninstall the old one (Again: manually), then run the downloaded driver installation. Do the same for Intel RST driver that Ztruker referred you to. Chances are your little utilities are not giving you the most current updates - hence why I suggested you do it manually.
      My ComputerSystem Spec


  7. Posts : 4
    Windows 10 Home
    Thread Starter
       31 Jan 2017 #7

    bookfox said: View Post
    From my post, keyword: manually. As in, don't use the booster or 'display drivers uninstaller'. Download and save the most current driver for the graphics card from the OEM site, uninstall the old one (Again: manually), then run the downloaded driver installation. Do the same for Intel RST driver that Ztruker referred you to. Chances are your little utilities are not giving you the most current updates - hence why I suggested you do it manually.
    All right, first of all, thanks for the help. I did a clean installation of my graphic card and Intel RST drivers(manually), rebooted my PC serveral times for testing but nothing. It didn't work. (sigh)
    Last edited by Noxido; 31 Jan 2017 at 12:57.
      My ComputerSystem Spec


 

Related Threads
Asus P8Z77 V Deluxe mobo. Seasonic 1050W modular PSU i7 2700k Noctua NH D14 air cooler Corsair Vengeance RAM 1600 (mobo - native is 1333mhz) Sometimes, when I access my BIOS, on the first page I see, it will show UEFI boot disk in the boot...
Hi, Today I've replace the old Seagate HDD with the new Samsung SSD, the old HDD was placed in the CDROM area. After that I cloned the old Window into the new SSD. Since then I frequently encountered this BSoD and it takes a lot of try for my...
I have been having the strangest behavior from my EVGA SR-2 dual Xeon system for the past week or so. The only new software that has been added is the beta nVidia driver 358.59. Now, I could just uninstall it and revert back to the WHQL driver...
Every since I upgraded to windows 10 and boot my desktop machine I get a BSOD with Bad Pool header. It keeps looping and rebooting with the same error. The only way around it is to go into the bios and save changes and then it allows me to log in. I...
Solved BSOD 60 seconds after boot every time in BSOD Crashes and Debugging
it has given me several reasons for BSOD, such as: unexpected kernel mode trap security check failure and others I forget sorry... I am running in safe mode now without problem for quite a while so I guess it is a driver problem, I hope? ...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:59.
Find Us